lib/fifo/sync/fifo_sync.sv

@@ -14,7 +14,8 @@ module fifo_sync #(
     output wire [DATA_WIDTH-1:0] dout,
     output wire                  empty,
     output wire                  full,
-    output wire [$clog2(DEPTH):0] data_count
+    output wire [$clog2(DEPTH):0] fill_level,
+    output reg                   err
 );
 
     localparam ADDR_WIDTH = $clog2(DEPTH);
@@ -37,15 +38,23 @@ module fifo_sync #(
     always @(posedge clk or negedge rst_n) begin
         if (!rst_n) begin
             rd_ptr <= 0;
-        end else if (rd_en && !empty) begin
+            err <= 1'b0;
+        end else begin
+            if (rd_en && empty) begin
+                err <= 1'b1;
+            end else begin
+                err <= 1'b0;
+            end
+            if (rd_en && !empty) begin
                 rd_ptr <= rd_ptr + 1'b1;
             end
         end
+    end
 
     // 数据计数
-    assign data_count = wr_ptr - rd_ptr;
+    assign fill_level = wr_ptr - rd_ptr;
     assign empty = (wr_ptr == rd_ptr);
-    assign full  = (data_count == DEPTH);
+    assign full  = (fill_level == DEPTH);
 
     generate
         if (USE_RAM) begin : USE_RAM_BLOCK

tb/fifo/sync/fifo_sync_tb.sv

@@ -15,7 +15,8 @@ module fifo_sync_tb;
     wire [DATA_WIDTH-1:0] dout;
     wire empty;
     wire full;
-    wire [$clog2(DEPTH):0] data_count;
+    wire [$clog2(DEPTH):0] fill_level;
+    wire err;
 
     // 实例化DUT
     fifo_sync #(
@@ -32,7 +33,8 @@ module fifo_sync_tb;
         .dout(dout),
         .empty(empty),
         .full(full),
-        .data_count(data_count)
+        .fill_level(fill_level),
+        .err(err)
     );
 
     // 时钟生成
@@ -81,6 +83,14 @@ module fifo_sync_tb;
         if (!empty) $display("[TB][ERROR] FIFO未空!");
         else $display("[TB][INFO] FIFO已空!");
 
+        // 尝试在empty时读，触发err
+        @(negedge clk);
+        rd_en = 1;
+        @(negedge clk);
+        rd_en = 0;
+        if (err) $display("[TB][INFO] 读空FIFO触发err信号");
+        else $display("[TB][ERROR] 读空FIFO未触发err!");
+
         // 交错写读
         for (int i = 0; i < 8; i++) begin
             @(negedge clk);
@@ -100,9 +110,11 @@ module fifo_sync_tb;
     // 监控输出
     always @(posedge clk) begin
         if (wr_en && !full)
-            $display("[TB][WRITE] @%0t: din=%0d, wr_ptr=%0d", $time, din, dut.wr_ptr);
+            $display("[TB][WRITE] @%0t: din=%0d, wr_ptr=%0d, fill_level=%0d", $time, din, dut.wr_ptr, fill_level);
         if (rd_en && !empty)
-            $display("[TB][READ ] @%0t: dout=%0d, rd_ptr=%0d", $time, dout, dut.rd_ptr);
+            $display("[TB][READ ] @%0t: dout=%0d, rd_ptr=%0d, fill_level=%0d", $time, dout, dut.rd_ptr, fill_level);
+        if (err)
+            $display("[TB][ERR  ] @%0t: 读空FIFO!", $time);
     end
 
 endmodule