'main' tests: Don't assume ps(1) is available.

It's actually unavailable in the minimal chroots Debian builds our
package on.  That's allowed by POSIX, which specifies ps(1) to be
optional, whereas id(1) —

- is not optional in POSIX
- should exist on every system anyone might run the testsuite on
- has the same length name, so test expectations don't have to be updated
- doesn't take a filename argument (ditto)

That does make the pipeline as a whole somewhat nonsensical
semantically, but it remains just as valid syntactically.

.github/workflows/test.yml

@@ -0,0 +1,75 @@
+---
+name: Tests
+on:
+  push:
+    paths-ignore:
+      - '**.md'
+      - '**.png'
+  pull_request:
+    paths-ignore:
+      - '**.md'
+      - '**.png'
+  schedule:
+    - cron: '29 7 * * 1'
+
+jobs:
+  test:
+    runs-on: ubuntu-latest
+    strategy:
+      fail-fast: false
+      matrix:
+        version:
+          - master
+          - 5.9
+          - 5.8.1
+          - 5.8
+          - 5.7.1
+          - 5.7
+          - 5.6.2
+          - 5.6.1
+          - 5.6
+          - 5.5.1
+          - 5.5
+          - 5.4.2
+          - 5.4.1
+          - 5.4
+          - 5.3.1
+          - 5.3
+          - 5.2
+          - 5.1.1
+          - 5.1
+          - 5.0.8
+          - 5.0.7
+          - 5.0.6
+          - 5.0.5
+          - 5.0.4
+          - 5.0.3
+          - 5.0.2
+          - 5.0.1
+          - 5.0.0
+          - 4.3.17
+          - 4.3.16
+          - 4.3.15
+          - 4.3.14
+          - 4.3.13
+          - 4.3.12
+          - 4.3.11
+    container:
+      image: ghcr.io/zsh-users/zsh:${{ matrix.version }}
+    steps:
+      - uses: actions/checkout@v4
+      - run: install_packages bsdmainutils make procps
+      - run: make test
+
+  notify:
+    runs-on: ubuntu-latest
+    needs: test
+    if: failure() && (github.repository_owner == 'zsh-users')
+    steps:
+      -
+        name: Notify IRC
+        uses: Gottox/irc-message-action@v2
+        with:
+          channel: '#zsh-syntax-highlighting'
+          nickname: zsyh-gh-bot
+          message: '${{ github.ref }} failed tests: https://github.com/${{ github.repository }}/actions/runs/${{ github.run_id }}'

.travis.yml

@@ -1,56 +0,0 @@
-language: generic
-sudo: required
-
-env:
-  - ZSH=master
-  - ZSH=5.8
-  - ZSH=5.7.1
-  - ZSH=5.7
-  - ZSH=5.6.2
-  - ZSH=5.6.1
-  - ZSH=5.6
-  - ZSH=5.5.1
-  - ZSH=5.5
-  - ZSH=5.4.2
-  - ZSH=5.4.1
-  - ZSH=5.4
-  - ZSH=5.3.1
-  - ZSH=5.3
-  - ZSH=5.2
-  - ZSH=5.1.1
-  - ZSH=5.1
-  - ZSH=5.0.8
-  - ZSH=5.0.7
-  - ZSH=5.0.6
-  - ZSH=5.0.5
-  - ZSH=5.0.4
-  - ZSH=5.0.3
-  - ZSH=5.0.2
-  - ZSH=5.0.1
-  - ZSH=5.0.0
-  - ZSH=4.3.17
-  - ZSH=4.3.16
-  - ZSH=4.3.15
-  - ZSH=4.3.14
-  - ZSH=4.3.13
-  - ZSH=4.3.12
-  - ZSH=4.3.11
-
-script: docker run -v $PWD:/work -w /work zshusers/zsh:${ZSH} /bin/sh -c 'install_packages make procps bsdmainutils && make test'
-
-notifications:
-  webhooks:
-    urls:
-      - https://webhooks.gitter.im/e/367e241cdea60cb2070b
-    on_success: change
-    on_failure: always
-    on_start: never
-  irc:
-    channels:
-      - "chat.freenode.net#zsh-syntax-highlighting"
-    on_success: change
-    on_failure: always
-    on_start: never
-    use_notice: true
-    template:
-      - "%{repository}/%{branch}#%{build_number}: %{message} Changes : %{compare_url} | Build : %{build_url}"

.version

@@ -1 +1 @@
-0.8.0-alpha1-pre-redrawhook
+0.8.1-dev

HACKING.md

@@ -95,5 +95,5 @@ zstyle ':completion:*:*:*:*:globbed-files' ignored-patterns {'*/',}zsh-syntax-hi
 IRC channel
 -----------
 
-We're on #zsh-syntax-highlighting on freenode.
+We're on #zsh-syntax-highlighting on Libera.Chat.
 

INSTALL.md

@@ -3,31 +3,67 @@ How to install
 
 ### Using packages
 
+First, install the package:
+
 * Arch Linux: [community/zsh-syntax-highlighting][arch-package] / [AUR/zsh-syntax-highlighting-git][AUR-package]
 * Debian: `zsh-syntax-highlighting` package [in `stretch`][debian-package] (or in [OBS repository][obs-repository])
 * Fedora: [zsh-syntax-highlighting package][fedora-package-alt] in Fedora 24+ (or in [OBS repository][obs-repository])
 * FreeBSD: `pkg install zsh-syntax-highlighting` (port name: [`shells/zsh-syntax-highlighting`][freebsd-port])
-* Gentoo: [mv overlay][gentoo-overlay]
-* Mac OS X / Homebrew: [brew install zsh-syntax-highlighting][brew-package]
-* Ubuntu: `zsh-syntax-highlighting` package [in Xenial][ubuntu-package] (or in [OBS repository][obs-repository])
-* RHEL / CentOS / Scientific Linux: `zsh-syntax-highlighting` package in [OBS repository][obs-repository]
+* Gentoo: [app-shells/zsh-syntax-highlighting][gentoo-repository]
+* Mac OS X / Homebrew: `brew install zsh-syntax-highlighting` ([formula][brew-package])
+* NetBSD: `pkg_add zsh-syntax-highlighting` (port name: [`shells/zsh-syntax-highlighting`][netbsd-port])
+* OpenBSD: `pkg_add zsh-syntax-highlighting` (port name: [`shells/zsh-syntax-highlighting`][openbsd-port])
 * openSUSE / SLE: `zsh-syntax-highlighting` package in [OBS repository][obs-repository]
+* RHEL / CentOS / Scientific Linux: `zsh-syntax-highlighting` package in [OBS repository][obs-repository]
+* Ubuntu: `zsh-syntax-highlighting` package [in Xenial][ubuntu-package] (or in [OBS repository][obs-repository])
 * Void Linux: `zsh-syntax-highlighting package` [in XBPS][void-package]
 
 [arch-package]: https://www.archlinux.org/packages/zsh-syntax-highlighting
 [AUR-package]: https://aur.archlinux.org/packages/zsh-syntax-highlighting-git
+[brew-package]: https://github.com/Homebrew/homebrew-core/blob/master/Formula/z/zsh-syntax-highlighting.rb
 [debian-package]: https://packages.debian.org/zsh-syntax-highlighting
-[freebsd-port]: http://www.freshports.org/textproc/zsh-syntax-highlighting/
-[gentoo-overlay]: http://gpo.zugaina.org/app-shells/zsh-syntax-highlighting
-[brew-package]: https://github.com/Homebrew/homebrew-core/blob/master/Formula/zsh-syntax-highlighting.rb
-[ubuntu-package]: https://launchpad.net/ubuntu/+source/zsh-syntax-highlighting
 [fedora-package]: https://apps.fedoraproject.org/packages/zsh-syntax-highlighting
 [fedora-package-alt]: https://bodhi.fedoraproject.org/updates/?packages=zsh-syntax-highlighting
+[freebsd-port]: https://www.freshports.org/textproc/zsh-syntax-highlighting/
+[gentoo-repository]: https://packages.gentoo.org/packages/app-shells/zsh-syntax-highlighting
+[netbsd-port]: http://cvsweb.netbsd.org/bsdweb.cgi/pkgsrc/shells/zsh-syntax-highlighting/
 [obs-repository]: https://software.opensuse.org/download.html?project=shells%3Azsh-users%3Azsh-syntax-highlighting&package=zsh-syntax-highlighting
+[openbsd-port]: https://cvsweb.openbsd.org/ports/shells/zsh-syntax-highlighting/
+[ubuntu-package]: https://launchpad.net/ubuntu/+source/zsh-syntax-highlighting
 [void-package]: https://github.com/void-linux/void-packages/tree/master/srcpkgs/zsh-syntax-highlighting
 
 See also [repology's cross-distro index](https://repology.org/metapackage/zsh-syntax-highlighting/versions)
 
+Second, enable zsh-syntax-highlighting by sourcing the script. Running this command on the terminal will add the source line to the end of your .zshrc:
+
+* On most Linux distributions (except perhaps NixOS):
+
+    ```zsh
+    echo "source /usr/share/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh" >> ${ZDOTDIR:-$HOME}/.zshrc
+    ```
+
+* NetBSD and OpenBSD:
+
+    ```zsh
+    echo "source /usr/local/share/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh" >> ${ZDOTDIR:-$HOME}/.zshrc
+    ```
+
+* Mac OS X / Homebrew:
+
+    ```zsh
+    echo "source $(brew --prefix)/share/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh" >> ${ZDOTDIR:-$HOME}/.zshrc
+    ```
+
+Then restart zsh (such as by opening a new instance of your terminal emulator).
+
+ Alternatively, add the `source` command manually **at the end** of your `.zshrc`:
+
+* On most Linux distributions (except perhaps NixOS):
+`source /usr/share/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh`
+* NetBSD and OpenBSD:
+`source /usr/local/share/zsh-syntax-highlighting/zsh-syntax-highlighting.zsh`
+
+Then restart zsh.
 
 ### In your ~/.zshrc
 
@@ -71,6 +107,12 @@ This list is incomplete as there are too many
 Add `antigen bundle zsh-users/zsh-syntax-highlighting` as the last bundle in
 your `.zshrc`.
 
+#### [Fig](https://fig.io)
+
+Click the `Install Plugin` button on the [Fig plugin page][fig-plugin].
+
+[fig-plugin]: https://fig.io/plugins/other/zsh-syntax-highlighting
+
 #### [Oh-my-zsh](https://github.com/robbyrussell/oh-my-zsh)
 
 1. Clone this repository in oh-my-zsh's plugins directory:
@@ -98,15 +140,15 @@ Zsh-syntax-highlighting is included with Prezto. See the
 
 Add `zgen load zsh-users/zsh-syntax-highlighting` to the end of your `.zshrc`.
 
+#### [zinit](https://github.com/zdharma-continuum/zinit)
+
+Add `zinit light zsh-users/zsh-syntax-highlighting` to the end of your
+`.zshrc`.
+
 #### [zplug](https://github.com/zplug/zplug)
 
 Add `zplug "zsh-users/zsh-syntax-highlighting", defer:2` to your `.zshrc`.
 
-#### [zplugin](https://github.com/psprint/zplugin)
-
-Add `zplugin load zsh-users/zsh-syntax-highlighting` to the end of your
-`.zshrc`.
-
 
 ### System-wide installation
 

README.md

@@ -1,12 +1,12 @@
-zsh-syntax-highlighting [![Build Status][build-status-image]][build-status-travis]
+zsh-syntax-highlighting [![Build Status][build-status-image]][build-status]
 =======================
 
 **[Fish shell][fish]-like syntax highlighting for [Zsh][zsh].**
 
 *Requirements: zsh 4.3.11+.*
 
-[fish]: http://www.fishshell.com/
-[zsh]: http://www.zsh.org/
+[fish]: https://fishshell.com/
+[zsh]: https://www.zsh.org/
 
 This package provides syntax highlighting for the shell zsh.  It enables
 highlighting of commands whilst they are typed at a zsh prompt into an
@@ -44,11 +44,23 @@ FAQ
 
 ### Why must `zsh-syntax-highlighting.zsh` be sourced at the end of the `.zshrc` file?
 
-`zsh-syntax-highlighting.zsh` wraps ZLE widgets.  It must be sourced after all
-custom widgets have been created (i.e., after all `zle -N` calls and after
-running `compinit`).  Widgets created later will work, but will not update the
+zsh-syntax-highlighting works by hooking into the Zsh Line Editor (ZLE) and
+computing syntax highlighting for the command-line buffer as it stands at the
+time z-sy-h's hook is invoked.
+
+In zsh 5.2 and older,
+`zsh-syntax-highlighting.zsh` hooks into ZLE by wrapping ZLE widgets.  It must
+be sourced after all custom widgets have been created (i.e., after all `zle -N`
+calls and after running `compinit`) in order to be able to wrap all of them.
+Widgets created after z-sy-h is sourced will work, but will not update the
 syntax highlighting.
 
+In zsh newer than 5.8 (not including 5.8 itself),
+zsh-syntax-highlighting uses the `add-zle-hook-widget` facility to install
+a `zle-line-pre-redraw` hook.  Hooks are run in order of registration,
+therefore, z-sy-h must be sourced (and register its hook) after anything else
+that adds hooks that modify the command-line buffer.
+
 ### Does syntax highlighting work during incremental history search?
 
 Highlighting the command line during an incremental history search (by default bound to
@@ -61,7 +73,7 @@ enough information to allow computing the highlighting correctly.)
 
 See issues [#288][i288] and [#415][i415] for details.
 
-[zshzle-Character-Highlighting]: http://zsh.sourceforge.net/Doc/Release/Zsh-Line-Editor.html#Character-Highlighting
+[zshzle-Character-Highlighting]: https://zsh.sourceforge.io/Doc/Release/Zsh-Line-Editor.html#Character-Highlighting
 [i288]: https://github.com/zsh-users/zsh-syntax-highlighting/pull/288
 [i415]: https://github.com/zsh-users/zsh-syntax-highlighting/pull/415
 
@@ -81,5 +93,5 @@ Syntax highlighting is done by pluggable highlighter scripts.  See the
 [documentation on highlighters](docs/highlighters.md) for details and
 configuration settings.
 
-[build-status-image]: https://travis-ci.org/zsh-users/zsh-syntax-highlighting.svg?branch=master
-[build-status-travis]: https://travis-ci.org/zsh-users/zsh-syntax-highlighting
+[build-status]: https://github.com/zsh-users/zsh-syntax-highlighting/actions
+[build-status-image]: https://github.com/zsh-users/zsh-syntax-highlighting/workflows/Tests/badge.svg

changelog.md

@@ -1,3 +1,96 @@
+# Changes in HEAD
+
+
+- Highlight `&>` `>&|` `>&!` `&>|` and `&>!` as redirection.
+  [#942]
+
+
+# Changes in 0.8.0
+
+This is a stable bugfix and feature release.  Major new features and changes include:
+
+
+## Changes fixed as part of the switch to zle-line-pre-redraw
+
+The changes in this section were fixed by switching to a `zle-line-pre-redraw`-based
+implementation.
+
+Note: The new implementation will only be used on future zsh releases,
+numbered 5.8.1.1 and newer, due to interoperability issues with other plugins
+(issues #418 and #579).  The underlying zsh feature has been available since
+zsh 5.3.
+
+Whilst under development, the new implementation was known as the
+"feature/redrawhook" topic branch.
+
+- Fixed: Highlighting not triggered after popping a buffer from the buffer stack
+  (using the `push-line` widget, default binding: `M-q`)
+  [#40]
+
+- Fixed: Invoking completion when there were no matches removed highlighting
+  [#90, #470]
+
+- Fixed: Two successive deletes followed by a yank only yanked the latest
+  delete, rather than both of them
+  [#150, #151, #160; cf. #183]
+
+- Presumed fixed: Completing `$(xsel)` results in an error message from `xsel`,
+  with pre-2017 versions of `xsel`.  (For 2017 vintage and newer, see the issue
+  for details.)
+  [#154]
+
+- Fixed: When the standard `bracketed-paste-magic` widget is in use, pastes were slow
+  [#295]
+
+- Fixed: No way to prevent a widget from being wrapped
+  [#324]
+
+- Fixed: No highlighting while cycling menu completion
+  [#375]
+
+- Fixed: Does not coexist with the `IGNORE_EOF` option
+  [#377]
+
+- Fixed: The `undefined-key` widget was wrapped
+  [#421]
+
+- Fixed: Does not coexist with the standard `surround` family of widgets
+  [#520]
+
+- Fixed: First completed filename doesn't get `path` highlighting
+  [#632]
+
+
+## Other changes
+
+- Add issue #712 to the previous release's changelog (hereinafter).
+
+- Fix highlighting when using an alias twice inside another alias
+  [#769, #775]
+
+- Remove lint warning for `env` followed by a pipe
+  [#797]
+
+- Recognize `proxychains` as a precommand
+  [#814, #914]
+
+- Honor shwordsplit when expanding parameters
+  [#687, #818]
+
+- Skip highlighting when keys are still pending in more cases
+  [#835]
+
+- Recognize `grc` as a precommand
+
+- Recognize `torsocks` and `torift` as precommands
+  [#898]
+
+- Recognize `cpulimit` as a precommand
+  [#897]
+
+- Recognize `ktrace` as a precommand
+
+
 # Changes in 0.8.0-alpha1-pre-redrawhook
 
 ## Notice about an improbable-but-not-impossible forward incompatibility
@@ -16,6 +109,25 @@ added to zsh at z-sy-h's initiative.  The new feature is used in the fix
 to issue #418.
 
 
+## Incompatible changes:
+
+- An unsuccessful completion (a <kbd>⮀ Tab</kbd> press that doesn't change the
+  command line) no longer causes highlighting to be lost.  Visual feedback can
+  alternatively be achieved by setting the `format` zstyle under the `warnings`
+  tag, for example,
+
+        zstyle ':completion:*:warnings' format '%F{red}No matches%f'
+
+    Refer to the [description of the `format` style in `zshcompsys(1)`]
+    [zshcompsys-Standard-Styles-format].
+
+    (#90, part of #245 (feature/redrawhook))
+
+[zshcompsys-Standard-Styles]: https://zsh.sourceforge.io/Doc/Release/Completion-System.html#Standard-Styles
+[zshcompsys-Standard-Styles-format]: https://zsh.sourceforge.io/Doc/Release/Completion-System.html#index-format_002c-completion-style
+  
+
+
 ## Other changes:
 
 - Document `$ZSH_HIGHLIGHT_MAXLENGTH`.
@@ -90,6 +202,8 @@ to issue #418.
 
 - Recognize `env` as a precommand (e.g., `env FOO=bar ls`)
 
+- Recognize `ionice` as a precommand
+
 - Recognize `strace` as a precommand
 
 - Fix an error message on stderr before every prompt when the `WARN_NESTED_VAR` zsh option is set:
@@ -114,6 +228,9 @@ to issue #418.
 
 - Improve performance of the `brackets` highlighter.
 
+- Fix highlighting of pre-command redirections (e.g., the `$fn` in `<$fn cat`)
+  [#712]
+
 
 # Changes in version 0.7.1
 
@@ -208,7 +325,7 @@ This is a stable release, featuring bugfixes and minor improvements.
 - The `isearch` and `suffix` [`$zle_highlight` settings][zshzle-Character-Highlighting].
   (79e4d3d12405, 15db71abd0cc, b56ee542d619; requires zsh 5.3 for `$ISEARCHMATCH_ACTIVE` / `$SUFFIX_ACTIVE` support)
 
-[zshzle-Character-Highlighting]: http://zsh.sourceforge.net/Doc/Release/Zsh-Line-Editor.html#Character-Highlighting
+[zshzle-Character-Highlighting]: https://zsh.sourceforge.io/Doc/Release/Zsh-Line-Editor.html#Character-Highlighting
 
 - Possible history expansions in double-quoted strings.
   (76ea9e1df316)
@@ -654,7 +771,7 @@ in this area.
 
 ## Developer-visible changes:
 
-- Test harness converted to [TAP](http://testanything.org/tap-specification.html) format
+- Test harness converted to [TAP](https://testanything.org/tap-specification.html) format
   (d99aa58aaaef, et seq)
 
 - Run each test in a separate subprocess, isolating them from each other

docs/highlighters.md

@@ -3,19 +3,21 @@ zsh-syntax-highlighting / highlighters
 
 Syntax highlighting is done by pluggable highlighters:
 
-* `main` - the base highlighter, and the only one [active by default][1].
-* `brackets` - [matches brackets][2] and parenthesis.
-* `pattern` - matches [user-defined patterns][3].
-* `cursor` - matches [the cursor position][4].
-* `root` - highlights the whole command line [if the current user is root][5].
-* `line` - applied to [the whole command line][6].
+* `main` - the base highlighter, and the only one [active by default][main].
+* `brackets` - [matches brackets][brackets] and parenthesis.
+* `pattern` - matches [user-defined patterns][pattern].
+* `regexp` - matches [user-defined regular expressions][regexp].
+* `cursor` - matches [the cursor position][cursor].
+* `root` - highlights the whole command line [if the current user is root][root].
+* `line` - applied to [the whole command line][line].
 
-[1]: highlighters/main.md
-[2]: highlighters/brackets.md
-[3]: highlighters/pattern.md
-[4]: highlighters/cursor.md
-[5]: highlighters/root.md
-[6]: highlighters/line.md
+[main]: highlighters/main.md
+[brackets]: highlighters/brackets.md
+[pattern]: highlighters/pattern.md
+[regexp]: highlighters/regexp.md
+[cursor]: highlighters/cursor.md
+[root]: highlighters/root.md
+[line]: highlighters/line.md
 
 
 Highlighter-independent settings
@@ -25,10 +27,10 @@ By default, all command lines are highlighted.  However, it is possible to
 prevent command lines longer than a fixed number of characters from being
 highlighted by setting the variable `${ZSH_HIGHLIGHT_MAXLENGTH}` to the maximum
 length (in characters) of command lines to be highlighter.  This is useful when
-editing very long comand lines (for example, with the [`fned`][fned] utility
+editing very long command lines (for example, with the [`fned`][fned] utility
 function).  Example:
 
-[fned]: http://zsh.sourceforge.net/Doc/Release/User-Contributions.html#index-zed
+[fned]: https://zsh.sourceforge.io/Doc/Release/User-Contributions.html#index-zed
 
 ```zsh
 ZSH_HIGHLIGHT_MAXLENGTH=512
@@ -38,16 +40,14 @@ ZSH_HIGHLIGHT_MAXLENGTH=512
 How to activate highlighters
 ----------------------------
 
-To activate an highlighter, add it to the `ZSH_HIGHLIGHT_HIGHLIGHTERS` array in
-`~/.zshrc`, for example:
+To activate an highlighter, add it to the `ZSH_HIGHLIGHT_HIGHLIGHTERS` array.
+By default `ZSH_HIGHLIGHT_HIGHLIGHTERS` is `(main)`. For example to activate
+`brackets`, `pattern`, and `cursor` highlighters, in `~/.zshrc` do:
 
 ```zsh
-ZSH_HIGHLIGHT_HIGHLIGHTERS=(main brackets pattern cursor)
+ZSH_HIGHLIGHT_HIGHLIGHTERS+=(brackets pattern cursor)
 ```
 
-By default, `$ZSH_HIGHLIGHT_HIGHLIGHTERS` is unset and only the `main`
-highlighter is active.
-
 
 How to tweak highlighters
 -------------------------
@@ -59,7 +59,7 @@ same as the syntax of "types of highlighting" of the zsh builtin
 `$zle_highlight` array, which is documented in [the `zshzle(1)` manual
 page][zshzle-Character-Highlighting].
 
-[zshzle-Character-Highlighting]: http://zsh.sourceforge.net/Doc/Release/Zsh-Line-Editor.html#Character-Highlighting
+[zshzle-Character-Highlighting]: https://zsh.sourceforge.io/Doc/Release/Zsh-Line-Editor.html#Character-Highlighting
 
 Some highlighters support additional configuration parameters; see each
 highlighter's documentation for details and examples.

docs/highlighters/brackets.md

@@ -28,4 +28,4 @@ The syntax for values is the same as the syntax of "types of highlighting" of
 the zsh builtin `$zle_highlight` array, which is documented in [the `zshzle(1)`
 manual page][zshzle-Character-Highlighting].
 
-[zshzle-Character-Highlighting]: http://zsh.sourceforge.net/Doc/Release/Zsh-Line-Editor.html#Character-Highlighting
+[zshzle-Character-Highlighting]: https://zsh.sourceforge.io/Doc/Release/Zsh-Line-Editor.html#Character-Highlighting

docs/highlighters/cursor.md

@@ -21,4 +21,4 @@ The syntax for values is the same as the syntax of "types of highlighting" of
 the zsh builtin `$zle_highlight` array, which is documented in [the `zshzle(1)`
 manual page][zshzle-Character-Highlighting].
 
-[zshzle-Character-Highlighting]: http://zsh.sourceforge.net/Doc/Release/Zsh-Line-Editor.html#Character-Highlighting
+[zshzle-Character-Highlighting]: https://zsh.sourceforge.io/Doc/Release/Zsh-Line-Editor.html#Character-Highlighting

docs/highlighters/line.md

@@ -21,4 +21,4 @@ The syntax for values is the same as the syntax of "types of highlighting" of
 the zsh builtin `$zle_highlight` array, which is documented in [the `zshzle(1)`
 manual page][zshzle-Character-Highlighting].
 
-[zshzle-Character-Highlighting]: http://zsh.sourceforge.net/Doc/Release/Zsh-Line-Editor.html#Character-Highlighting
+[zshzle-Character-Highlighting]: https://zsh.sourceforge.io/Doc/Release/Zsh-Line-Editor.html#Character-Highlighting

docs/highlighters/main.md

@@ -116,6 +116,6 @@ of that (new) kind will be highlighted by the style `arg0_$kind`,
 where `$kind` is the output of `type -w` on the new kind of command word.  If that
 style is not defined, then the style `arg0` will be used instead.
 
-[zshmisc-Simple-Commands-And-Pipelines]: http://zsh.sourceforge.net/Doc/Release/Shell-Grammar.html#Simple-Commands-_0026-Pipelines
+[zshmisc-Simple-Commands-And-Pipelines]: https://zsh.sourceforge.io/Doc/Release/Shell-Grammar.html#Simple-Commands-_0026-Pipelines
 
-[zshzle-Character-Highlighting]: http://zsh.sourceforge.net/Doc/Release/Zsh-Line-Editor.html#Character-Highlighting
+[zshzle-Character-Highlighting]: https://zsh.sourceforge.io/Doc/Release/Zsh-Line-Editor.html#Character-Highlighting

docs/highlighters/pattern.md

@@ -21,4 +21,4 @@ The syntax for values is the same as the syntax of "types of highlighting" of
 the zsh builtin `$zle_highlight` array, which is documented in [the `zshzle(1)`
 manual page][zshzle-Character-Highlighting].
 
-[zshzle-Character-Highlighting]: http://zsh.sourceforge.net/Doc/Release/Zsh-Line-Editor.html#Character-Highlighting
+[zshzle-Character-Highlighting]: https://zsh.sourceforge.io/Doc/Release/Zsh-Line-Editor.html#Character-Highlighting

docs/highlighters/regexp.md

@@ -12,11 +12,44 @@ To use this highlighter, associate regular expressions with styles in the
 
 ```zsh
 typeset -A ZSH_HIGHLIGHT_REGEXP
-ZSH_HIGHLIGHT_REGEXP+=('\bsudo\b' fg=123,bold)
+ZSH_HIGHLIGHT_REGEXP+=('^rm .*' fg=red,bold)
 ```
 
-This will highlight "sudo" only as a complete word, i.e., "sudo cmd", but not
-"sudoedit"
+This will highlight lines that start with a call to the `rm` command.
+
+The regular expressions flavour used is [PCRE][pcresyntax] when the
+`RE_MATCH_PCRE` option is set and POSIX Extended Regular Expressions (ERE),
+as implemented by the platform's C library, otherwise.  For details on the
+latter, see [the `zsh/regex` module's documentation][MAN_ZSH_REGEX] and the
+`regcomp(3)` and `re_format(7)` manual pages on your system.
+
+For instance, to highlight `sudo` only as a complete word, i.e., `sudo cmd`,
+but not `sudoedit`, one might use:
+
+* When the `RE_MATCH_PCRE` is set:
+
+    ```zsh
+    typeset -A ZSH_HIGHLIGHT_REGEXP
+    ZSH_HIGHLIGHT_REGEXP+=('\bsudo\b' fg=123,bold)
+    ```
+
+* When the `RE_MATCH_PCRE` is unset, on platforms with GNU `libc` (e.g., many GNU/Linux distributions):
+
+    ```zsh
+    typeset -A ZSH_HIGHLIGHT_REGEXP
+    ZSH_HIGHLIGHT_REGEXP+=('\<sudo\>' fg=123,bold)
+    ```
+
+* When the `RE_MATCH_PCRE` is unset, on BSD-based platforms (e.g., macOS):
+
+    ```zsh
+    typeset -A ZSH_HIGHLIGHT_REGEXP
+    ZSH_HIGHLIGHT_REGEXP+=('[[:<:]]sudo[[:>:]]' fg=123,bold)
+    ```
+
+Note, however, that PCRE and POSIX ERE have a large common subset:
+for instance, the regular expressions `[abc]`, `a*`, and `(a|b)` have the same
+meaning in both flavours.
 
 The syntax for values is the same as the syntax of "types of highlighting" of
 the zsh builtin `$zle_highlight` array, which is documented in [the `zshzle(1)`
@@ -25,6 +58,8 @@ manual page][zshzle-Character-Highlighting].
 See also: [regular expressions tutorial][perlretut], zsh regexp operator `=~`
 in [the `zshmisc(1)` manual page][zshmisc-Conditional-Expressions]
 
-[zshzle-Character-Highlighting]: http://zsh.sourceforge.net/Doc/Release/Zsh-Line-Editor.html#Character-Highlighting
-[perlretut]: http://perldoc.perl.org/perlretut.html
-[zshmisc-Conditional-Expressions]: http://zsh.sourceforge.net/Doc/Release/Conditional-Expressions.html#Conditional-Expressions
+[zshzle-Character-Highlighting]: https://zsh.sourceforge.io/Doc/Release/Zsh-Line-Editor.html#Character-Highlighting
+[perlretut]: https://perldoc.perl.org/perlretut
+[zshmisc-Conditional-Expressions]: https://zsh.sourceforge.io/Doc/Release/Conditional-Expressions.html#Conditional-Expressions
+[MAN_ZSH_REGEX]: https://zsh.sourceforge.io/Doc/Release/Zsh-Modules.html#The-zsh_002fregex-Module
+[pcresyntax]: https://www.pcre.org/original/doc/html/pcresyntax.html

docs/highlighters/root.md

@@ -22,4 +22,4 @@ The syntax for values is the same as the syntax of "types of highlighting" of
 the zsh builtin `$zle_highlight` array, which is documented in [the `zshzle(1)`
 manual page][zshzle-Character-Highlighting].
 
-[zshzle-Character-Highlighting]: http://zsh.sourceforge.net/Doc/Release/Zsh-Line-Editor.html#Character-Highlighting
+[zshzle-Character-Highlighting]: https://zsh.sourceforge.io/Doc/Release/Zsh-Line-Editor.html#Character-Highlighting

highlighters/main/main-highlighter.zsh

@@ -76,7 +76,7 @@ _zsh_highlight_main_add_region_highlight() {
   integer start=$1 end=$2
   shift 2
 
-  if (( in_alias )); then
+  if (( $#in_alias )); then
     [[ $1 == unknown-token ]] && alias_style=unknown-token
     return
   fi
@@ -254,10 +254,9 @@ _zsh_highlight_main__is_runnable() {
 _zsh_highlight_main__is_redirection() {
   # A redirection operator token:
   # - starts with an optional single-digit number;
-  # - then, has a '<' or '>' character;
-  # - is not a process substitution [<(...) or >(...)].
-  # - is not a numeric glob <->
-  [[ $1 == (<0-9>|)(\<|\>)* ]] && [[ $1 != (\<|\>)$'\x28'* ]] && [[ $1 != *'<'*'-'*'>'* ]]
+  # - is one of the tokens listed in zshmisc(1)
+  # - however (z) normalizes ! to |
+  [[ ${1#[0-9]} == (\<|\<\>|(\>|\>\>)(|\|)|\<\<(|-)|\<\<\<|\<\&|\&\<|(\>|\>\>)\&(|\|)|\&(\>|\>\>)(|\||\!)) ]]
 }
 
 # Resolve alias.
@@ -349,6 +348,7 @@ _zsh_highlight_highlighter_main_paint()
     'noglob' ''
     # 'time' and 'nocorrect' shouldn't be added here; they're reserved words, not precommands.
 
+    # miscellaneous commands
     'doas' aCu:Lns # as of OpenBSD's doas(1) dated September 4, 2016
     'nice' n: # as of current POSIX spec
     'pkexec' '' # doesn't take short options; immune to #121 because it's usually not passed --option flags
@@ -362,21 +362,21 @@ _zsh_highlight_highlighter_main_paint()
     'env' u:i
     'ionice' cn:t:pPu # util-linux 2.33.1-0.1
     'strace' IbeaosXPpEuOS:ACdfhikqrtTvVxyDc # strace 4.26-0.2
-
-    # As of OpenSSH 8.1p1
-    'ssh-agent' aEPt:csDd:k
-    # suckless-tools v44
-    # Argumentless flags that can't be followed by a command: -v
-    'tabbed' gnprtTuU:cdfhs
-
-    # moreutils 0.62-1
-    'chronic' :ev
-    'ifne' :n
-
+    'proxychains' f:q # proxychains 4.4.0
+    'torsocks' idq:upaP # Torsocks 2.3.0
+    'torify' idq:upaP # Torsocks 2.3.0
+    'ssh-agent' aEPt:csDd:k # As of OpenSSH 8.1p1
+    'tabbed' gnprtTuU:cdfhs:v # suckless-tools v44
+    'chronic' :ev # moreutils 0.62-1
+    'ifne' :n # moreutils 0.62-1
+    'grc' :se # grc - a "generic colouriser" (that's their spelling, not mine)
+    'cpulimit' elp:ivz # cpulimit 0.2
+    'ktrace' fgpt:aBCcdiT
   )
   # Commands that would need to skip one positional argument:
   #    flock
   #    ssh
+  #    _wanted (skip two)
 
   if [[ $zsyh_user_options[ignorebraces] == on || ${zsyh_user_options[ignoreclosebraces]:-off} == on ]]; then
     local right_brace_is_recognised_everywhere=false
@@ -476,7 +476,11 @@ _zsh_highlight_main_highlighter__try_expand_parameter()
             ;;
           (*)
             # scalar, presumably
+            if [[ $zsyh_user_options[shwordsplit] == on ]]; then
+              words=( ${(P)=MATCH} )
+            else
               words=( ${(P)MATCH} )
+            fi
             ;;
         esac
         reply=( "${words[@]}" )
@@ -498,17 +502,18 @@ _zsh_highlight_main_highlighter__try_expand_parameter()
 _zsh_highlight_main_highlighter_highlight_list()
 {
   integer start_pos end_pos=0 buf_offset=$1 has_end=$3
-  # alias_style is the style to apply to an alias once in_alias=0
+  # alias_style is the style to apply to an alias once $#in_alias == 0
   #     Usually 'alias' but set to 'unknown-token' if any word expanded from
   #     the alias would be highlighted as unknown-token
   # param_style is analogous for parameter expansions
   local alias_style param_style last_arg arg buf=$4 highlight_glob=true saw_assignment=false style
   local in_array_assignment=false # true between 'a=(' and the matching ')'
-  # in_alias is equal to the number of shifts needed until arg=args[1] pops an
-  #     arg from BUFFER and not added by an alias.
+  # in_alias is an array of integers with each element equal to the number
+  #     of shifts needed until arg=args[1] pops an arg from the next level up
+  #     alias or from BUFFER.
   # in_param is analogous for parameter expansions
-  integer in_alias=0 in_param=0 len=$#buf
-  local -a match mbegin mend list_highlights
+  integer in_param=0 len=$#buf
+  local -a in_alias match mbegin mend list_highlights
   # seen_alias is a map of aliases already seen to avoid loops like alias a=b b=a
   local -A seen_alias
   # Pattern for parameter names
@@ -596,12 +601,23 @@ _zsh_highlight_main_highlighter_highlight_list()
     last_arg=$arg
     arg=$args[1]
     shift args
-    if (( in_alias )); then
-      (( in_alias-- ))
-      if (( in_alias == 0 )); then
+    if (( $#in_alias )); then
+      (( in_alias[1]-- ))
+      # Remove leading 0 entries
+      in_alias=($in_alias[$in_alias[(i)<1->],-1])
+      if (( $#in_alias == 0 )); then
         seen_alias=()
         # start_pos and end_pos are of the alias (previous $arg) here
         _zsh_highlight_main_add_region_highlight $start_pos $end_pos $alias_style
+      else
+        # We can't unset keys that contain special characters (] \ and some others).
+        # More details: https://www.zsh.org/workers/43269
+        (){
+          local alias_name
+          for alias_name in ${(k)seen_alias[(R)<$#in_alias->]}; do
+            seen_alias=("${(@kv)seen_alias[(I)^$alias_name]}")
+          done
+        }
       fi
     fi
     if (( in_param )); then
@@ -637,9 +653,9 @@ _zsh_highlight_main_highlighter_highlight_list()
       fi
     fi
 
-    if (( in_alias == 0 && in_param == 0 )); then
+    if (( $#in_alias == 0 && in_param == 0 )); then
       # Compute the new $start_pos and $end_pos, skipping over whitespace in $buf.
-      [[ "$proc_buf" = (#b)(#s)(([ $'\t']|[\\]$'\n')#)(?|)* ]]
+      [[ "$proc_buf" = (#b)(#s)(''([ $'\t']|[\\]$'\n')#)(?|)* ]]
       # The first, outer parenthesis
       integer offset="${#match[1]}"
       (( start_pos = end_pos + offset ))
@@ -693,11 +709,10 @@ _zsh_highlight_main_highlighter_highlight_list()
       if [[ $res == "alias" ]]; then
         # Mark insane aliases as unknown-token (cf. #263).
         if [[ $arg == ?*=* ]]; then
-          (( in_alias == 0 )) && in_alias=1
           _zsh_highlight_main_add_region_highlight $start_pos $end_pos unknown-token
           continue
         fi
-        seen_alias[$arg]=1
+        seen_alias[$arg]=$#in_alias
         _zsh_highlight_main__resolve_alias $arg
         local -a alias_args
         # Elision is desired in case alias x=''
@@ -707,15 +722,15 @@ _zsh_highlight_main_highlighter_highlight_list()
           alias_args=(${(z)REPLY})
         fi
         args=( $alias_args $args )
-        if (( in_alias == 0 )); then
+        if (( $#in_alias == 0 )); then
           alias_style=alias
-          # Add one because we will in_alias-- on the next loop iteration so
-          # this iteration should be considered in in_alias as well
-          (( in_alias += $#alias_args + 1 ))
         else
-          # This arg is already included in the count, so no need to + 1.
-          (( in_alias += $#alias_args ))
+          # Transfer the count of this arg to the new element about to be appended.
+          (( in_alias[1]-- ))
         fi
+        # Add one because we will in_alias[1]-- on the next loop iteration so
+        # this iteration should be considered in in_alias as well
+        in_alias=( $(($#alias_args + 1)) $in_alias )
         (( in_redirection++ )) # Stall this arg
         continue
       else
@@ -728,7 +743,7 @@ _zsh_highlight_main_highlighter_highlight_list()
     # Analyse the current word.
     if _zsh_highlight_main__is_redirection $arg ; then
       if (( in_redirection == 1 )); then
-        # Two consecuive redirection operators is an error.
+        # Two consecutive redirection operators is an error.
         _zsh_highlight_main_add_region_highlight $start_pos $end_pos unknown-token
       else
         in_redirection=2
@@ -854,7 +869,7 @@ _zsh_highlight_main_highlighter_highlight_list()
         style=commandseparator
       elif [[ $this_word == *':start:'* ]] && [[ $arg == $'\n' ]]; then
         style=commandseparator
-      elif [[ $this_word == *':start:'* ]] && [[ $arg == ';' ]] && (( in_alias )); then
+      elif [[ $this_word == *':start:'* ]] && [[ $arg == ';' ]] && (( $#in_alias )); then
         style=commandseparator 
       else
         # Empty commands (semicolon follows nothing) are valid syntax.
@@ -879,6 +894,14 @@ _zsh_highlight_main_highlighter_highlight_list()
         next_word=':start:'
         highlight_glob=true
         saw_assignment=false
+        (){
+          local alias_name
+          for alias_name in ${(k)seen_alias[(R)<$#in_alias->]}; do
+            # We can't unset keys that contain special characters (] \ and some others).
+            # More details: https://www.zsh.org/workers/43269
+            seen_alias=("${(@kv)seen_alias[(I)^$alias_name]}")
+          done
+        }
         if [[ $arg != '|' && $arg != '|&' ]]; then
           next_word+=':start_of_pipeline:'
         fi
@@ -902,8 +925,8 @@ _zsh_highlight_main_highlighter_highlight_list()
         next_word=${next_word//:regular:/}
         next_word+=':sudo_opt:'
         next_word+=':start:'
-        if [[ $arg == 'exec' ]]; then
-          # To allow "exec 2>&1;" where there's no command word
+        if [[ $arg == 'exec' || $arg == 'env' ]]; then
+          # To allow "exec 2>&1;" and "env | grep" where there's no command word
           next_word+=':regular:'
         fi
       else
@@ -1146,7 +1169,7 @@ _zsh_highlight_main_highlighter_highlight_list()
     fi
     _zsh_highlight_main_add_region_highlight $start_pos $end_pos $style
   done
-  (( in_alias == 1 )) && in_alias=0 _zsh_highlight_main_add_region_highlight $start_pos $end_pos $alias_style
+  (( $#in_alias )) && in_alias=() _zsh_highlight_main_add_region_highlight $start_pos $end_pos $alias_style
   (( in_param == 1 )) && in_param=0 _zsh_highlight_main_add_region_highlight $start_pos $end_pos $param_style
   [[ "$proc_buf" = (#b)(#s)(([[:space:]]|\\$'\n')#) ]]
   REPLY=$(( end_pos + ${#match[1]} - 1 ))
@@ -1257,7 +1280,7 @@ _zsh_highlight_main_highlighter_check_path()
 
   # If this word ends the buffer, check if it's the prefix of a valid path.
   if (( has_end && (len == end_pos) )) &&
-     (( ! in_alias )) &&
+     (( ! $#in_alias )) &&
      [[ $WIDGET != zle-line-finish ]]; then
     # TODO: When we've dropped support for pre-5.0.6 zsh, use the *(Y1) glob qualifier here.
     local -a tmp

highlighters/main/test-data/alias-brackets.zsh

@@ -0,0 +1,41 @@
+#!/usr/bin/env zsh
+# -------------------------------------------------------------------------------------------------
+# Copyright (c) 2021 zsh-syntax-highlighting contributors
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without modification, are permitted
+# provided that the following conditions are met:
+#
+#  * Redistributions of source code must retain the above copyright notice, this list of conditions
+#    and the following disclaimer.
+#  * Redistributions in binary form must reproduce the above copyright notice, this list of
+#    conditions and the following disclaimer in the documentation and/or other materials provided
+#    with the distribution.
+#  * Neither the name of the zsh-syntax-highlighting contributors nor the names of its contributors
+#    may be used to endorse or promote products derived from this software without specific prior
+#    written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+# FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+# IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# -------------------------------------------------------------------------------------------------
+# -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*-
+# vim: ft=zsh sw=2 ts=2 et
+# -------------------------------------------------------------------------------------------------
+
+# Have to use cat here as it must be a command that exists.
+# Otherwise, the test would fail with the first token being recognized
+# as an "unknown-token".
+alias ]=cat
+
+BUFFER='] /'
+
+expected_region_highlight=(
+  '1 1 alias' # ]
+  '3 3 path' # /
+)

highlighters/main/test-data/alias-reuse1.zsh

@@ -0,0 +1,39 @@
+#!/usr/bin/env zsh
+# -------------------------------------------------------------------------------------------------
+# Copyright (c) 2020 zsh-syntax-highlighting contributors
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without modification, are permitted
+# provided that the following conditions are met:
+#
+#  * Redistributions of source code must retain the above copyright notice, this list of conditions
+#    and the following disclaimer.
+#  * Redistributions in binary form must reproduce the above copyright notice, this list of
+#    conditions and the following disclaimer in the documentation and/or other materials provided
+#    with the distribution.
+#  * Neither the name of the zsh-syntax-highlighting contributors nor the names of its contributors
+#    may be used to endorse or promote products derived from this software without specific prior
+#    written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+# FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+# IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# -------------------------------------------------------------------------------------------------
+# -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*-
+# vim: ft=zsh sw=2 ts=2 et
+# -------------------------------------------------------------------------------------------------
+
+alias a=: b='a | a'
+
+BUFFER='b | b'
+
+expected_region_highlight=(
+  '1 1 alias' # b
+  '3 3 commandseparator' # |
+  '5 5 alias' # b
+)

highlighters/main/test-data/alias-reuse2.zsh

@@ -0,0 +1,39 @@
+#!/usr/bin/env zsh
+# -------------------------------------------------------------------------------------------------
+# Copyright (c) 2020 zsh-syntax-highlighting contributors
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without modification, are permitted
+# provided that the following conditions are met:
+#
+#  * Redistributions of source code must retain the above copyright notice, this list of conditions
+#    and the following disclaimer.
+#  * Redistributions in binary form must reproduce the above copyright notice, this list of
+#    conditions and the following disclaimer in the documentation and/or other materials provided
+#    with the distribution.
+#  * Neither the name of the zsh-syntax-highlighting contributors nor the names of its contributors
+#    may be used to endorse or promote products derived from this software without specific prior
+#    written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+# FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+# IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# -------------------------------------------------------------------------------------------------
+# -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*-
+# vim: ft=zsh sw=2 ts=2 et
+# -------------------------------------------------------------------------------------------------
+
+alias a=: b='a && a'
+
+BUFFER='b && b'
+
+expected_region_highlight=(
+  '1 1 alias' # b
+  '3 4 commandseparator' # &&
+  '6 6 alias' # b
+)

highlighters/main/test-data/alias-reuse3.zsh

@@ -0,0 +1,39 @@
+#!/usr/bin/env zsh
+# -------------------------------------------------------------------------------------------------
+# Copyright (c) 2020 zsh-syntax-highlighting contributors
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without modification, are permitted
+# provided that the following conditions are met:
+#
+#  * Redistributions of source code must retain the above copyright notice, this list of conditions
+#    and the following disclaimer.
+#  * Redistributions in binary form must reproduce the above copyright notice, this list of
+#    conditions and the following disclaimer in the documentation and/or other materials provided
+#    with the distribution.
+#  * Neither the name of the zsh-syntax-highlighting contributors nor the names of its contributors
+#    may be used to endorse or promote products derived from this software without specific prior
+#    written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+# FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+# IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# -------------------------------------------------------------------------------------------------
+# -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*-
+# vim: ft=zsh sw=2 ts=2 et
+# -------------------------------------------------------------------------------------------------
+
+alias a=: b='a; a'
+
+BUFFER='b; b'
+
+expected_region_highlight=(
+  '1 1 alias' # b
+  '2 2 commandseparator' # ;
+  '4 4 alias' # b
+)

highlighters/main/test-data/alias-reuse4.zsh

@@ -0,0 +1,42 @@
+#!/usr/bin/env zsh
+# -------------------------------------------------------------------------------------------------
+# Copyright (c) 2020 zsh-syntax-highlighting contributors
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without modification, are permitted
+# provided that the following conditions are met:
+#
+#  * Redistributions of source code must retain the above copyright notice, this list of conditions
+#    and the following disclaimer.
+#  * Redistributions in binary form must reproduce the above copyright notice, this list of
+#    conditions and the following disclaimer in the documentation and/or other materials provided
+#    with the distribution.
+#  * Neither the name of the zsh-syntax-highlighting contributors nor the names of its contributors
+#    may be used to endorse or promote products derived from this software without specific prior
+#    written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+# FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+# IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# -------------------------------------------------------------------------------------------------
+# -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*-
+# vim: ft=zsh sw=2 ts=2 et
+# -------------------------------------------------------------------------------------------------
+
+alias a=: b='a $(a)'
+
+BUFFER='b $(b)'
+
+expected_region_highlight=(
+  '1 1 alias' # b
+  '3 6 default' # $(b)
+  '3 6 command-substitution-unquoted' # $(b)
+  '3 4 command-substitution-delimiter-unquoted' # $(
+  '5 5 alias' # b
+  '6 6 command-substitution-delimiter-unquoted' # )
+)

highlighters/main/test-data/alias-reuse5.zsh

@@ -0,0 +1,43 @@
+#!/usr/bin/env zsh
+# -------------------------------------------------------------------------------------------------
+# Copyright (c) 2020 zsh-syntax-highlighting contributors
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without modification, are permitted
+# provided that the following conditions are met:
+#
+#  * Redistributions of source code must retain the above copyright notice, this list of conditions
+#    and the following disclaimer.
+#  * Redistributions in binary form must reproduce the above copyright notice, this list of
+#    conditions and the following disclaimer in the documentation and/or other materials provided
+#    with the distribution.
+#  * Neither the name of the zsh-syntax-highlighting contributors nor the names of its contributors
+#    may be used to endorse or promote products derived from this software without specific prior
+#    written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+# FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+# IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# -------------------------------------------------------------------------------------------------
+# -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*-
+# vim: ft=zsh sw=2 ts=2 et
+# -------------------------------------------------------------------------------------------------
+
+alias a=: b='a < <(a)'
+
+BUFFER='b < <(b)'
+
+expected_region_highlight=(
+  '1 1 alias' # b
+  '3 3 redirection' # <
+  '5 8 default' # <(b)
+  '5 8 process-substitution' # <(b)
+  '5 6 process-substitution-delimiter' # <(
+  '7 7 alias' # b
+  '8 8 process-substitution-delimiter' # )
+)

highlighters/main/test-data/alias-self2.zsh

@@ -0,0 +1,37 @@
+#!/usr/bin/env zsh
+# -------------------------------------------------------------------------------------------------
+# Copyright (c) 2020 zsh-syntax-highlighting contributors
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without modification, are permitted
+# provided that the following conditions are met:
+#
+#  * Redistributions of source code must retain the above copyright notice, this list of conditions
+#    and the following disclaimer.
+#  * Redistributions in binary form must reproduce the above copyright notice, this list of
+#    conditions and the following disclaimer in the documentation and/or other materials provided
+#    with the distribution.
+#  * Neither the name of the zsh-syntax-highlighting contributors nor the names of its contributors
+#    may be used to endorse or promote products derived from this software without specific prior
+#    written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+# FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+# IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# -------------------------------------------------------------------------------------------------
+# -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*-
+# vim: ft=zsh sw=2 ts=2 et
+# -------------------------------------------------------------------------------------------------
+
+alias cat='cat | cat'
+
+BUFFER='cat'
+
+expected_region_highlight=(
+  '1 3 alias' # cat
+)

highlighters/main/test-data/block-assignment-no-command.zsh

@@ -0,0 +1,38 @@
+#!/usr/bin/env zsh
+# -------------------------------------------------------------------------------------------------
+# Copyright (c) 2022 zsh-syntax-highlighting contributors
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without modification, are permitted
+# provided that the following conditions are met:
+#
+#  * Redistributions of source code must retain the above copyright notice, this list of conditions
+#    and the following disclaimer.
+#  * Redistributions in binary form must reproduce the above copyright notice, this list of
+#    conditions and the following disclaimer in the documentation and/or other materials provided
+#    with the distribution.
+#  * Neither the name of the zsh-syntax-highlighting contributors nor the names of its contributors
+#    may be used to endorse or promote products derived from this software without specific prior
+#    written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+# FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+# IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# -------------------------------------------------------------------------------------------------
+# -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*-
+# vim: ft=zsh sw=2 ts=2 et
+# -------------------------------------------------------------------------------------------------
+
+BUFFER=$'{ a=42 }'
+
+expected_region_highlight=(
+  '1 1 reserved-word' # {
+  '3 6 assign' # a=42
+  '5 6 default' # 42
+  '8 8 reserved word "issue #854"' # }
+)

highlighters/main/test-data/multiple-redirections.zsh

@@ -27,7 +27,7 @@
 # vim: ft=zsh sw=2 ts=2 et
 # -------------------------------------------------------------------------------------------------
 
-BUFFER='ps aux | grep java | sort | uniq | tail | head'
+BUFFER='id bob | grep java | sort | uniq | tail | head'
 
 expected_region_highlight=(
   "1  2  command" # ps

highlighters/main/test-data/null-exec2-printenv.zsh

@@ -0,0 +1,38 @@
+#!/usr/bin/env zsh
+# -------------------------------------------------------------------------------------------------
+# Copyright (c) 2021 zsh-syntax-highlighting contributors
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without modification, are permitted
+# provided that the following conditions are met:
+#
+#  * Redistributions of source code must retain the above copyright notice, this list of conditions
+#    and the following disclaimer.
+#  * Redistributions in binary form must reproduce the above copyright notice, this list of
+#    conditions and the following disclaimer in the documentation and/or other materials provided
+#    with the distribution.
+#  * Neither the name of the zsh-syntax-highlighting contributors nor the names of its contributors
+#    may be used to endorse or promote products derived from this software without specific prior
+#    written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+# FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+# IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# -------------------------------------------------------------------------------------------------
+# -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*-
+# vim: ft=zsh sw=2 ts=2 et
+# -------------------------------------------------------------------------------------------------
+
+BUFFER=$'env | grep $needle'
+
+expected_region_highlight=(
+  '1 3 precommand' # env
+  '5 5 commandseparator' # |
+  '7 10 command' # grep
+  '12 18 default' # $needle
+)

highlighters/main/test-data/opt-shwordsplit1.zsh

@@ -36,5 +36,5 @@ ed() { command ed "$@" }
 BUFFER=$'$EDITOR'
 
 expected_region_highlight=(
-  '1 7 function "issue #687"' # $EDITOR
+  '1 7 function' # $EDITOR
 )

highlighters/main/test-data/parameter-expansion-shwordsplit.zsh

@@ -0,0 +1,38 @@
+#!/usr/bin/env zsh
+# -------------------------------------------------------------------------------------------------
+# Copyright (c) 2021 zsh-syntax-highlighting contributors
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without modification, are permitted
+# provided that the following conditions are met:
+#
+#  * Redistributions of source code must retain the above copyright notice, this list of conditions
+#    and the following disclaimer.
+#  * Redistributions in binary form must reproduce the above copyright notice, this list of
+#    conditions and the following disclaimer in the documentation and/or other materials provided
+#    with the distribution.
+#  * Neither the name of the zsh-syntax-highlighting contributors nor the names of its contributors
+#    may be used to endorse or promote products derived from this software without specific prior
+#    written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+# FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+# IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# -------------------------------------------------------------------------------------------------
+# -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*-
+# vim: ft=zsh sw=2 ts=2 et
+# -------------------------------------------------------------------------------------------------
+
+setopt sh_word_split
+local foo='echo foo'
+
+BUFFER='$foo'
+
+expected_region_highlight=(
+  '1 4 builtin' # $foo
+)

highlighters/main/test-data/parameter-to-global-alias.zsh

@@ -28,8 +28,12 @@
 # vim: ft=zsh sw=2 ts=2 et
 # -------------------------------------------------------------------------------------------------
 
-alias -g x=y
-local s=x
+if type global_alias >/dev/null; then
+  skip_test="Test is written on the assumption that 'global_alias' is not a valid command name, but that assumption does not hold"
+  return 0
+fi
+alias -g global_alias=y
+local s=global_alias
 
 BUFFER=$'$s'
 

highlighters/main/test-data/precommand-killing1.zsh

@@ -29,11 +29,12 @@
 # -------------------------------------------------------------------------------------------------
 
 hash sudo=false
+touch foo
 
-BUFFER='sudo -e /etc/passwd'
+BUFFER='sudo -e ./foo'
 
 expected_region_highlight=(
   '1 4 precommand' # sudo
   '6 7 single-hyphen-option' # -e
-  '9 19 path' # /etc/passwd
+  '9 13 path' # ./foo
 )

highlighters/main/test-data/redirection-all.zsh

@@ -0,0 +1,95 @@
+#!/usr/bin/env zsh
+# -------------------------------------------------------------------------------------------------
+# Copyright (c) 2024 zsh-syntax-highlighting contributors
+# All rights reserved.
+#
+# Redistribution and use in source and binary forms, with or without modification, are permitted
+# provided that the following conditions are met:
+#
+#  * Redistributions of source code must retain the above copyright notice, this list of conditions
+#    and the following disclaimer.
+#  * Redistributions in binary form must reproduce the above copyright notice, this list of
+#    conditions and the following disclaimer in the documentation and/or other materials provided
+#    with the distribution.
+#  * Neither the name of the zsh-syntax-highlighting contributors nor the names of its contributors
+#    may be used to endorse or promote products derived from this software without specific prior
+#    written permission.
+#
+# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR
+# IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND
+# FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+# CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+# DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
+# DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER
+# IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
+# OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+# -------------------------------------------------------------------------------------------------
+# -*- mode: zsh; sh-indentation: 2; indent-tabs-mode: nil; sh-basic-offset: 2; -*-
+# vim: ft=zsh sw=2 ts=2 et
+# -------------------------------------------------------------------------------------------------
+
+BUFFER=$': <foo 9<foo <>foo 9<>foo >foo 9>foo >|foo >\!foo >>foo >>|foo >>\!foo <<<foo <&9 >&9 <&- >&- <&p >&p >&foo &>foo >&|foo >&\!foo &>|foo &>\!foo >>&foo &>>foo >>&|foo >>&\!foo &>>|foo &>>\!foo'
+
+expected_region_highlight=(
+  '1 1 builtin' # :
+  '3 3 redirection' # <
+  '4 6 default' # foo
+  '8 9 redirection' # 9<
+  '10 12 default' # foo
+  '14 15 redirection' # <>
+  '16 18 default' # foo
+  '20 22 redirection' # 9<>
+  '23 25 default' # foo
+  '27 27 redirection' # >
+  '28 30 default' # foo
+  '32 33 redirection' # 9>
+  '34 36 default' # foo
+  '38 39 redirection' # >|
+  '40 42 default' # foo
+  '44 45 redirection' # >\!
+  '46 48 default' # foo
+  '50 51 redirection' # >>
+  '52 54 default' # foo
+  '56 58 redirection' # >>|
+  '59 61 default' # foo
+  '63 65 redirection' # >>\!
+  '66 68 default' # foo
+  '70 72 redirection' # <<<
+  '73 75 default' # foo
+  '77 78 redirection' # <&
+  '79 79 numeric-fd' # 9
+  '81 82 redirection' # >&
+  '83 83 numeric-fd' # 9
+  '85 86 redirection' # <&
+  '87 87 redirection' # -
+  '89 90 redirection' # >&
+  '91 91 redirection' # -
+  '93 94 redirection' # <&
+  '95 95 redirection' # p
+  '97 98 redirection' # >&
+  '99 99 redirection' # p
+  '101 102 redirection' # >&
+  '103 105 default' # foo
+  '107 108 redirection' # &>
+  '109 111 default' # foo
+  '113 115 redirection' # >&|
+  '116 118 default' # foo
+  '120 122 redirection' # >&\!
+  '123 125 default' # foo
+  '127 129 redirection' # &>|
+  '130 132 default' # foo
+  '134 136 redirection' # &>\!
+  '137 139 default' # foo
+  '141 143 redirection' # >>&
+  '144 146 default' # foo
+  '148 150 redirection' # &>>
+  '151 153 default' # foo
+  '155 158 redirection' # >>&|
+  '159 161 default' # foo
+  '163 166 redirection' # >>&\!
+  '167 169 default' # foo
+  '171 174 redirection' # &>>|
+  '175 177 default' # foo
+  '179 182 redirection' # &>>\!
+  '183 185 default' # foo
+)

highlighters/main/test-data/simple-redirection.zsh

@@ -27,7 +27,7 @@
 # vim: ft=zsh sw=2 ts=2 et
 # -------------------------------------------------------------------------------------------------
 
-BUFFER='ps aux | grep java'
+BUFFER='id bob | grep java'
 
 expected_region_highlight=(
   "1  2  command" # ps

release.md

@@ -1,11 +1,12 @@
 # Release procedure (for developers):
 
+- Ensure every `is-at-least` invocation passes a stable zsh release's version number as the first argument
 - For minor (A.B.0) releases:
   - Check whether the release uses any not-yet-released zsh features
 - Check open issues and outstanding pull requests
 - Confirm `make test` passes
   - check with multiple zsh versions
-    (easiest to check travis: https://travis-ci.org/zsh-users/zsh-syntax-highlighting/)
+    (easiest to check GitHub Actions: https://github.com/zsh-users/zsh-syntax-highlighting/actions)
 - Update changelog.md
   `tig --abbrev=12  --abbrev-commit 0.4.1..upstream/master`
 - Make sure there are no local commits and that `git status` is clean;

tests/README.md

@@ -104,7 +104,7 @@ By default, the results of all tests will be printed; to show only "interesting"
 results (tests that failed but were expected to succeed, or vice-versa), run
 `make quiet-test` (or `make test QUIET=y`).
 
-[TAP]: http://testanything.org/
+[TAP]: https://testanything.org/
 
 
 Performance test

tests/generate.zsh

@@ -31,6 +31,9 @@
 emulate -LR zsh
 setopt localoptions extendedglob
 
+# Required for add-zle-hook-widget.
+zmodload zsh/zle
+
 # Argument parsing.
 if (( $# * $# - 7 * $# + 12 )) || [[ $1 == -* ]]; then
   print -r -- >&2 "$0: usage: $0 BUFFER HIGHLIGHTER BASENAME [PREAMBLE]"

tests/test-highlighting.zsh

@@ -31,6 +31,9 @@
 
 setopt NO_UNSET WARN_CREATE_GLOBAL
 
+# Required for add-zle-hook-widget.
+zmodload zsh/zle
+
 local -r root=${0:h:h}
 local -a anon_argv; anon_argv=("$@")
 

tests/test-perfs.zsh

@@ -29,6 +29,9 @@
 # -------------------------------------------------------------------------------------------------
 
 
+# Required for add-zle-hook-widget.
+zmodload zsh/zle
+
 # Check an highlighter was given as argument.
 [[ -n "$1" ]] || {
   echo >&2 "Bail out! You must provide the name of a valid highlighter as argument."

zsh-syntax-highlighting.zsh

@@ -49,12 +49,58 @@ if true; then
   fi
 fi
 
+# This function takes a single argument F and returns True iff F is an autoload stub.
+_zsh_highlight__function_is_autoload_stub_p() {
+  if zmodload -e zsh/parameter; then
+    #(( ${+functions[$1]} )) &&
+    [[ "$functions[$1]" == *"builtin autoload -X"* ]]
+  else
+    #[[ $(type -wa -- "$1") == *'function'* ]] &&
+    [[ "${${(@f)"$(which -- "$1")"}[2]}" == $'\t'$histchars[3]' undefined' ]]
+  fi
+  # Do nothing here: return the exit code of the if.
+}
+
+# Return True iff the argument denotes a function name.
+_zsh_highlight__is_function_p() {
+  if zmodload -e zsh/parameter; then
+    (( ${+functions[$1]} ))
+  else
+    [[ $(type -wa -- "$1") == *'function'* ]]
+  fi
+}
+
+# This function takes a single argument F and returns True iff F denotes the
+# name of a callable function.  A function is callable if it is fully defined
+# or if it is marked for autoloading and autoloading it at the first call to it
+# will succeed.  In particular, if F has been marked for autoloading
+# but is not available in $fpath, then calling this function on F will return False.
+#
+# See users/21671 https://www.zsh.org/cgi-bin/mla/redirect?USERNUMBER=21671
+_zsh_highlight__function_callable_p() {
+  if _zsh_highlight__is_function_p "$1" &&
+     ! _zsh_highlight__function_is_autoload_stub_p "$1"
+  then
+    # Already fully loaded.
+    return 0 # true
+  else
+    # "$1" is either an autoload stub, or not a function at all.
+    #
+    # Use a subshell to avoid affecting the calling shell.
+    #
+    # We expect 'autoload +X' to return non-zero if it fails to fully load
+    # the function.
+    ( autoload -U +X -- "$1" 2>/dev/null )
+    return $?
+  fi
+}
+
 # -------------------------------------------------------------------------------------------------
 # Core highlighting update system
 # -------------------------------------------------------------------------------------------------
 
 # Use workaround for bug in ZSH?
-# zsh-users/zsh@48cadf4 http://www.zsh.org/mla/workers//2017/msg00034.html
+# zsh-users/zsh@48cadf4 https://www.zsh.org/mla/workers/2017/msg00034.html
 autoload -Uz is-at-least
 if is-at-least 5.4; then
   typeset -g zsh_highlight__pat_static_bug=false
@@ -77,7 +123,7 @@ _zsh_highlight()
   typeset -r ret
 
   # $region_highlight should be predefined, either by zle or by the test suite's mock (non-special) array.
-  (( ${+region_highlight} )) || {
+  (( ${+region_highlight[@]} )) || {
     echo >&2 'zsh-syntax-highlighting: error: $region_highlight is not defined'
     echo >&2 'zsh-syntax-highlighting: (Check whether zsh-syntax-highlighting was installed according to the instructions.)'
     return $ret
@@ -109,15 +155,7 @@ _zsh_highlight()
         # C structs, so that none of the previous case patterns will match.
         #
         # In either case, fall back to a version check.
-        #
-        # The memo= feature was added to zsh in commit zsh-5.8-172-gdd6e702ee.
-        # The version number at the time was 5.8.0.2-dev (see Config/version.mk).
-        # Therefore, on 5.8.0.3 and newer the memo= feature is available.
-        #
-        # On zsh version 5.8.0.2 between the aforementioned commit and the
-        # first Config/version.mk bump after it (which, at the time of writing,
-        # is yet to come), this condition will false negative.
-        if is-at-least 5.8.0.3; then
+        if is-at-least 5.9; then
           integer -gr zsh_highlight__memo_feature=1
         else
           integer -gr zsh_highlight__memo_feature=0
@@ -173,7 +211,8 @@ _zsh_highlight()
   [[ -n ${ZSH_HIGHLIGHT_MAXLENGTH:-} ]] && [[ $#BUFFER -gt $ZSH_HIGHLIGHT_MAXLENGTH ]] && return $ret
 
   # Do not highlight if there are pending inputs (copy/paste).
-  [[ $PENDING -gt 0 ]] && return $ret
+  (( KEYS_QUEUED_COUNT > 0 )) && return $ret
+  (( PENDING > 0 )) && return $ret
 
   {
     local cache_place
@@ -351,9 +390,49 @@ _zsh_highlight_call_widget()
   _zsh_highlight
 }
 
-# Rebind all ZLE widgets to make them invoke _zsh_highlights.
-_zsh_highlight_bind_widgets()
-{
+# Decide whether to use the zle-line-pre-redraw codepath (colloquially known as
+# "feature/redrawhook", after the topic branch's name) or the legacy "bind all
+# widgets" codepath.
+#
+# We use the new codepath under two conditions:
+#
+# 1. If it's available, which we check by testing for add-zle-hook-widget's availability.
+# 
+# 2. If zsh has the memo= feature, which is required for interoperability reasons.
+#    See issues #579 and #735, and the issues referenced from them.
+#
+#    We check this with a plain version number check, since a functional check,
+#    as done by _zsh_highlight, can only be done from inside a widget
+#    function — a catch-22.
+if is-at-least 5.9 && _zsh_highlight__function_callable_p add-zle-hook-widget
+then
+  autoload -U add-zle-hook-widget
+  _zsh_highlight__zle-line-finish() {
+    # Reset $WIDGET since the 'main' highlighter depends on it.
+    #
+    # Since $WIDGET is declared by zle as read-only in this function's scope,
+    # a nested function is required in order to shadow its built-in value;
+    # see "User-defined widgets" in zshall.
+    () {
+      local -h -r WIDGET=zle-line-finish
+      _zsh_highlight
+    }
+  }
+  _zsh_highlight__zle-line-pre-redraw() {
+    # Set $? to 0 for _zsh_highlight.  Without this, subsequent
+    # zle-line-pre-redraw hooks won't run, since add-zle-hook-widget happens to
+    # call us with $? == 1 in the common case.
+    true && _zsh_highlight "$@"
+  }
+  _zsh_highlight_bind_widgets(){}
+  if [[ -o zle ]]; then
+    add-zle-hook-widget zle-line-pre-redraw _zsh_highlight__zle-line-pre-redraw
+    add-zle-hook-widget zle-line-finish _zsh_highlight__zle-line-finish
+  fi
+else
+  # Rebind all ZLE widgets to make them invoke _zsh_highlights.
+  _zsh_highlight_bind_widgets()
+  {
     setopt localoptions noksharrays
     typeset -F SECONDS
     local prefix=orig-s$SECONDS-r$RANDOM # unique each time, in case we're sourced more than once
@@ -416,7 +495,8 @@ _zsh_highlight_bind_widgets()
            fi
       esac
     done
-}
+  }
+fi
 
 # Load highlighters from directory.
 #