Merge pull request #1193 from zsh-users/remove_stack

Remove stack completion

src/_l3build

@@ -3,7 +3,7 @@
 # Description
 # -----------
 #
-#  Completion script for l3build (https://github.com/latex3/l3build/).
+#  Completion script for l3build 2025-09-03 (https://github.com/latex3/l3build/).
 #  Modified from rejected https://github.com/latex3/l3build/pull/267
 #
 # ------------------------------------------------------------------------------
@@ -14,49 +14,60 @@
 #
 # ------------------------------------------------------------------------------
 
-__l3build() {
+_l3build_targets() {
   local targets=(
-    'check:Run\ all\ automated\ tests'
-    'clean:Clean\ out\ directory\ tree'
-    'ctan:Create\ CTAN-ready\ archive'
-    'doc:Typesets\ all\ documentation\ files'
-    'install:Installs\ files\ into\ the\ local\ texmf\ tree'
-    'manifest:Creates\ a\ manifest\ file'
-    'save:Saves\ test\ validation\ log'
-    'tag:Updates\ release\ tags\ in\ files'
-    'uninstall:Uninstalls\ files\ from\ the\ local\ texmf\ tree'
-    'unpack:Unpacks\ the\ source\ files\ into\ the\ build\ tree'
-    'upload:Send\ archive\ to\ CTAN\ for\ public\ release'
+    'check:Run all automated tests'
+    'clean:Clean out directory tree'
+    'ctan:Create CTAN-ready archive'
+    'doc:Typesets all documentation files'
+    'install:Installs files into the local texmf tree'
+    'manifest:Creates a manifest file'
+    'save:Saves test validation log'
+    'tag:Updates release tags in files'
+    'uninstall:Uninstalls files from the local texmf tree'
+    'unpack:Unpacks the source files into the build tree'
+    'upload:Send archive to CTAN for public release'
   )
-  local options=(
-    {--config,-c}'[Sets the config(s) used for running tests]':lua_file:'_files -g "*.lua"'
-    --date'[Sets the date to insert into sources]':
-    --debug'[Runs target in debug mode]'
-    --dirty'[Skip cleaning up the test area]'
-    --dry-run'[Dry run for install or upload]'
-    --email'[Email address of CTAN uploader]':
-    {--engine,-e}'[Sets the engine(s) to use for running test]':engine:'(pdftex xetex luatex ptex uptex)'
-    --epoch'[Sets the epoch for tests and typesetting]':
-    {--file,-F}'[Take the upload announcement from the given file]':file:_files
-    --first'[Name of first test to run]':
-    {--force,-f}'[Force tests to run if engine is not set up]'
-    --full'[Install all files]'
-    {--halt-on-error,-H}'[Stops running tests after the first failure]'
-    '(- : *)'{--help,-h}'[Print this message and exit]'
-    --last'[Name of last test to run]':
-    {--message,-m}'[Text for upload announcement message]':
-    {--quiet,-q}'[Suppresses TeX output when unpacking]'
-    --rerun'[Skip setup\: simply rerun tests]'
-    --show-log-on-error'[Show the full log of the failure with '\''halt-on-error'\'']'
-    {--show-saves,-S}'[Show the invocation to update failing .tlg files]'
-    --shuffle'[Shuffle order of tests]'
-    --texmfhome'[Location of user texmf tree]':
-    '(- : *)'--version'[Print version information and exit]'
-  )
-  _arguments -s -S $options "1:target:(($targets))"
+
+  _describe -t targets 'target' targets "$@"
 }
 
-__l3build
+_l3build() {
+  local ret=1
+  local -a engines=(pdftex xetex luatex ptex uptex)
+
+  _arguments -s -S \
+    '(-c --config)'\*{-c,--config}'[Set the config(s) used for running tests]:lua_file:_files -g "*.(lua|tlg)"' \
+    '(-d --date)'{-d,--date}'[Set the date to insert into sources]:date' \
+    '--debug[Run target in debug mode]' \
+    '--dev[Use the development LaTex format]' \
+    '--dirty[Skip cleaning up the test area]' \
+    '--dry-run[Dry run for install or upload]' \
+    '--email[Email address of CTAN uploader]:email' \
+    '(-e --engine)'{--engine,-e}'[Set the engine(s) to use for running test]:engine:(($engines))' \
+    '--epoch[Sets the epoch for tests and typesetting]:epoch' \
+    '(-F --file)'{--file,-F}'[Take the upload announcement from the given file]:file:_files' \
+    '--first[Name of first test to run]:name' \
+    '--full[Install all files]' \
+    '(-H --halt-on-error)'{-H,--halt-on-error}'[Stops running tests after the first failure]' \
+    '(- : *)'{-h,--help}'[Print this message and exit]' \
+    '--last[Name of last test to run]:name' \
+    '(-m --message)'{-m,--message}'[Text for upload announcement message]:message' \
+    '(-q --quiet)'{-q,--quiet}'[Suppresses TeX output when unpacking]' \
+    '--rerun[Skip setup\: simply rerun tests]' \
+    '--show-log-on-error[Show the full log of the failure with "halt-on-error"]' \
+    '(-S --show-saves)'{-S,--show-saves}'[Show the invocation to update failing .tlg files]' \
+    '--shuffle[Shuffle order of tests]' \
+    '(-s --stdengine)'{-s,--stdengine}'[Run tests only with the standard engine]' \
+    '--texmfhome[Location of user texmf tree]:location:_files' \
+    '(- : *)--version[Print version information and exit]' \
+    "1:target:_l3build_targets" \
+    && ret=0
+
+  return ret
+}
+
+_l3build "$@"
 
 # Local Variables:
 # mode: Shell-Script

src/_node

@@ -69,6 +69,9 @@ _node_scripts() {
   _describe 'scripts' scripts
 }
 
+_node() {
+  local ret=1
+
   _arguments \
     '-[script read from stdin (default; interactive mode if a tty)]' \
     '--[indicate the end of node options]' \
@@ -244,7 +247,12 @@ _arguments \
     '--zero-fill-buffers[automatically zero-fill all newly allocated Buffer and SlowBuffer instances]' \
     '(- 1 *)'{-h,--help}'[print node command line options]' \
     '(- 1 *)'{-v,--version}'[print Node.js version]' \
-  '*: :_node_args'
+    '*: :_node_args' && ret=0
+
+  return ret
+}
+
+_node "$@"
 
 # Local Variables:
 # mode: Shell-Script

src/_phing

@@ -23,7 +23,7 @@
 # Description
 # -----------
 #
-#  Completion script for Phing (https://www.phing.info/).
+#  Completion script for Phing 3.1.0 (https://www.phing.info/).
 #
 # ------------------------------------------------------------------------------
 # Authors
@@ -39,36 +39,53 @@ _phing() {
   typeset -A opt_args
 
   # Follow https://www.phing.info/guide/chunkhtml/sec.commandlineargs.html for more information
-  _arguments \
+  _arguments -C \
     '(-h -help)'{-h,-help}'[display the help screen]' \
     '(-v -version)'{-v,-version}'[print version information and exit]' \
-    '(-l -list)'{-l,-list}'[list all available targets in buildfile (excluding targets that have their hidden attribute set to true)]' \
+    '(-l -list)'{-l,-list}'[list all available targets in buildfile]' \
+    '(-i -init)'{-i,-init}'[generates an initial buildfile]:file:_files' \
     '(-q -quiet)'{-q,-quiet}'[quiet operation, no output at all]' \
+    '(-S -silent)'{-S,-silent}'[print nothing but task outputs and build failures]' \
     '-verbose[verbose, give some more output]' \
     '-debug[output debug information]' \
+    '(-e -emacs)'{-e,-emacs}'[produce logging information without adornments]' \
+    '-diagnostics[print diagnostics information]' \
+    '(-strict -no-strict)-strict[run build in strict mode]' \
+    '(-strict -no-strict)-no-strict[run build normally]' \
+    '-longtargets[show target descriptions during build]' \
     '-logfile[use given file for log]:file:_files' \
-    '-D[set the property to the specified value to be used in the buildfile]' \
-    '-find []:file:_files' \
-    '-buildfile [specify an alternate buildfile name. Default is build.xml]:file:_files' \
-    '-logger [specify an alternate logger. Default is phing.listener.DefaultLogger. Other options include phing.listener.NoBannerLogger, phing.listener.AnsiColorLogger, phing.listener.XmlLogger, phing.listener.TargetLogger and phing.listener.HtmlColorLogger]' \
-    '-propertyfile [load properties from the specified file]:file:_files' \
-    '(-v --version)'{-v,--version}'[show version]' \
+    '-logger[the class which is to perform logging]:class' \
+    '*-listener[add an instance of class as a project listener]:class' \
+    '(-f -buildfile)'{-f,-buildfile}'[build file]:file:_files' \
+    '*-D[set the property to the specified value to be used in the buildfile]' \
+    '(-k -keep-going)'{-k,-keep-going}'[execute all targets that do not depend on failed target(s)]' \
+    '-propertyfile[load all properties from the specified file]:file:_files' \
+    '-propertyfileoverride[values in property file override existing values]' \
+    '-find[search for buildfile towards the root of the filesystem and use it]:file:_files' \
+    '-inputhandler[the class to use to handle user input]:class' \
+    '(- *)'{-v,-version}'[show version]' \
     '1: :->targets' \
     '*:: :->args' \
   && ret=0
 
   case $state in
-    targets)
-      local buildfile; buildfile=build.xml
+    (targets)
+      local buildfile=build.xml
+      if (( $+opt_args[-buildfile] )); then
+        buildfile=${opt_args[-buildfile]}
+      elif (($+opt_args[-f] )); then
+        buildfile=${opt_args[-f]}
+      fi
+
       if [[ ! -f $buildfile ]]
       then
         ret=0
       else
-        local targets; targets=($(sed -nE "/<target /s/.*name=[\"'](\w+)[\"'].*/\1/p" $buildfile))
+        local -a targets=($(sed -nE "/<target /s/.*name=[\"'](\w+)[\"'].*/\1/p" $buildfile))
         _describe -t 'targets' 'target' targets && ret=0
       fi
     ;;
-    args)
+    (args)
       if [[ CURRENT -eq NORMARG && ${+opt_args[--match]} -eq 0 ]]
       then
         # If the current argument is the first non-option argument

src/_stack

@@ -1,134 +0,0 @@
-#compdef stack
-# ------------------------------------------------------------------------------
-# Copyright (c) 2015 Github zsh-users - https://github.com/zsh-users
-# All rights reserved.
-#
-# Redistribution and use in source and binary forms, with or without
-# modification, are permitted provided that the following conditions are met:
-#     * Redistributions of source code must retain the above copyright
-#       notice, this list of conditions and the following disclaimer.
-#     * Redistributions in binary form must reproduce the above copyright
-#       notice, this list of conditions and the following disclaimer in the
-#       documentation and/or other materials provided with the distribution.
-#     * Neither the name of the zsh-users nor the
-#       names of its contributors may be used to endorse or promote products
-#       derived from this software without specific prior written permission.
-#
-# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND
-# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
-# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
-# DISCLAIMED. IN NO EVENT SHALL ZSH-USERS BE LIABLE FOR ANY
-# DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
-# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
-# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
-# ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
-# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
-# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-# ------------------------------------------------------------------------------
-# Description
-# ------------------------------------------------------------------------------
-#
-# Completion script for stack (https://github.com/commercialhaskell/stack).
-#
-# ------------------------------------------------------------------------------
-# Authors
-# ------------------------------------------------------------------------------
-#
-# * Toshiki Teramura <toshiki.teramura@gmail.com>
-# * Nikita Ursol <nikita20001116@gmail.com>
-#
-# ------------------------------------------------------------------------------
-
-_stack () {
-    _arguments \
-        --help'[show usage information]' \
-        --version'[show version]' \
-        --numeric-version'[show only version number]' \
-        --hpack-numeric-version"[show only hpack's version number]" \
-        '--docker[enable using a Docker container, run "stack --docker-help" for details]' \
-        '--no-docker[disable using a Docker container, run "stack --docker-help" for details]' \
-        '--nix[enable use of a Nix-shell, run "stack --nix-help" for details]' \
-        '--no-nix[disable use of a Nix-shell, run "stack --nix-help" for details]' \
-        --verbosity'[verbosity: silent, error, warn, info, debug]' \
-        {-v,--verbose}'[enable verbose mode: verbosity level "debug"]' \
-        --silent'[enable silent mode: verbosity level "silent"]' \
-        --time-in-log'[enable inclusion of timings in logs, to use diff with logs]' \
-        --no-time-in-log'[disable inclusion of timings in logs, to use diff with logs]' \
-        --stack-root'[absolute path to the global stack root directory]' \
-        --work-dir'[relative path of work directory]' \
-        --system-ghc'[enable using the system installed GHC if available and a matching version]' \
-        --no-system-ghc'[disable using the system installed GHC if available and a matching version]' \
-        --install-ghc'[enable downloading and installing GHC if necessary]' \
-        --no-install-ghc'[disable downloading and installing GHC if necessary]' \
-        --arch'[system architecture, e.g. i386, x86_64]' \
-        --ghc-variant'[specialized GHC variant, e.g. integersimple (incompatible with --system-ghc)]' \
-        --ghc-build'[specialized GHC build, e.g. "gmp4" or "standard" (usually auto-detected)]' \
-        {-j,--jobs}'[number of concurrent jobs to run]' \
-        --extra-include-dirs'[extra directories to check for C header files]' \
-        --extra-lib-dirs'[extra directories to check for libraries]' \
-        --with-gcc'[use custom path to gcc executable]' \
-        --with-hpack'[use custom path to hpack executable]' \
-        --skip-ghc-check'[enable skipping the GHC version and architecture check]' \
-        --no-skip-ghc-check'[disable skipping the GHC version and architecture check]' \
-        --skip-msys'[enable skipping the local MSYS installation (Windows only)]' \
-        --no-skip-msys'[disable skipping the local MSYS installation (Windows only)]' \
-        --local-bin-path'[install binaries to specified location]' \
-        --setup-info-yaml'[alternate URL or relative / absolute path for stack dependencies]' \
-        --modify-code-page'[enable setting the codepage to support UTF-8 (Windows only)]' \
-        --no-modify-code-page'[disable setting the codepage to support UTF-8 (Windows only)]' \
-        --allow-different-user'[enable permission for non-owners to use a stack installation (POSIX only)]' \
-        --no-allow-different-user'[disable permission for non-owners to use a stack installation (POSIX only)]' \
-        --dump-logs'[enable dump the build output logs for local packages to the console]' \
-        --no-dump-logs'[disable dump the build output logs for local packages to the console]' \
-        {--color,--colour}'[specify when to use color in output; accepts "always", "never", "auto"]' \
-        --resolver'[override resolver in project file]' \
-        --terminal'[enable overriding terminal detection in the case of running in a false terminal]' \
-        --no-terminal'[disable overriding terminal detection in the case of running in a false terminal]' \
-        {--stack-colors,--stack-colours}"[specify stack's output styles]" \
-        --terminal-width'[specify the width of the terminal, used for pretty-print messages]' \
-        --stack-yaml'[override project stack.yaml file]' \
-        --lock-file'[specify how to interact with lock files.]' \
-        '*: :__stack_modes'
-}
-
-__stack_modes () {
-    _values \
-        'subcommand' \
-        'build[build the project(s) in this directory/configuration]' \
-        'install[build executables and install to a user path]' \
-        'test[build and test the project(s) in this directory/configuration]' \
-        'bench[build and benchmark the project(s) in this directory/configuration]' \
-        'haddock[generate haddocks for the project(s) in this directory/configuration]' \
-        'new[create a brand new project]' \
-        'templates[show how to find templates available for "stack new".]' \
-        'init[create stack project config from cabal or hpack package specifications]' \
-        'setup[get the appropriate ghc for your project]' \
-        'path[print out handy path information]' \
-        "ls[list command. (supports snapshots, dependencies and stack's styles)]" \
-        'unpack[unpack one or more packages locally]' \
-        'update[update the package index]' \
-        'upgrade[upgrade to the latest stack]' \
-        'upload[upload a package to Hackage]' \
-        'sdist[create source distribution tarballs]' \
-        'dot[visualize your projects dependency graph using Graphviz dot]' \
-        'ghc[run ghc]' \
-        'hoogle[run hoogle, the Haskell API search engine.]' \
-        'exec[execute a command]' \
-        'run[build and run an executable.]' \
-        'ghci[run ghci in the context of package(s) (experimental)]' \
-        "repl[run ghci in the context of package(s) (experimental) (alias for 'ghci')]" \
-        'runghc[run runghc]' \
-        "runhaskell[run runghc (alias for 'runghc')]" \
-        'script[run a Stack Script]' \
-        'eval[evaluate some haskell code inline.]' \
-        'clean[delete build artefacts for the project packages.]' \
-        'purge[delete the project stack working directories.]' \
-        'query[query general build information (experimental)]' \
-        'ide[ide-specific commands]' \
-        'docker[subcommands specific to Docker use]' \
-        'config[subcommands for accessing and modifying configuration values]' \
-        'hpc[subcommands specific to Haskell Program Coverage]'
-
-}
-
-_stack "$@"

src/_tsx

@@ -0,0 +1,58 @@
+#compdef tsx
+# ------------------------------------------------------------------------------
+# Copyright (c) 2025 Github zsh-users - https://github.com/zsh-users
+#
+# Permission is hereby granted, free of charge, to any person obtaining
+# a copy of this software and associated documentation files (the
+# "Software"), to deal in the Software without restriction, including
+# without limitation the rights to use, copy, modify, merge, publish,
+# distribute, sublicense, and/or sell copies of the Software, and to
+# permit persons to whom the Software is furnished to do so, subject to
+# the following conditions:
+#
+# The above copyright notice and this permission notice shall be included
+# in all copies or substantial portions of the Software.
+#
+# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+# OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+# THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR
+# OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+# ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+# OTHER DEALINGS IN THE SOFTWARE.
+# ------------------------------------------------------------------------------
+# Description
+# -----------
+#
+#  Completion script for tsx v4.21.0. (https://github.com/privatenumber/tsx)
+#
+# ------------------------------------------------------------------------------
+# Authors
+# -------
+#
+#  * Shohei Yoshida (https://github.com/syohex) <syohex@gmail.com>
+#
+# ------------------------------------------------------------------------------
+
+_tsx_completion() {
+  _arguments \
+    '(- *)'{-h,--help}'[show help]' \
+    '(- *)'{-v,--version}'[show version]' \
+    '--no-cache[disable caching]' \
+    '--tsconfig[custom tsconfig.json path]:path:_files -g "*.json"' \
+    '1: :(watch)'
+}
+
+_tsx() {
+  _alternative 'tsx: :_tsx_completion' 'node: :_node'
+}
+
+_tsx "$@"
+
+# Local Variables:
+# mode: Shell-Script
+# sh-indentation: 2
+# indent-tabs-mode: nil
+# sh-basic-offset: 2
+# End:
+# vim: ft=zsh sw=2 ts=2 et