From 0713143ec8ffc55da4c9f81e475cd5e21f2771f4 Mon Sep 17 00:00:00 2001 From: Julien Nicoulaud Date: Thu, 8 Sep 2016 22:26:58 +0200 Subject: [PATCH] #207: remove compdefs without a license header --- src/_celery | 139 -------------- src/_cpanm | 105 ----------- src/_ditz | 53 ------ src/_dzen2 | 44 ----- src/_gem | 499 ------------------------------------------------- src/_hledger | 177 ------------------ src/_id3 | 70 ------- src/_id3v2 | 116 ------------ src/_iw | 247 ------------------------ src/_jekyll | 145 -------------- src/_lein | 62 ------ src/_logger | 61 ------ src/_lunar | 314 ------------------------------- src/_manage.py | 276 --------------------------- src/_pactree | 26 --- src/_pear | 89 --------- src/_primus | 43 ----- src/_rebar | 94 ---------- src/_socat | 233 ----------------------- src/_symfony | 456 -------------------------------------------- src/_tarsnap | 35 ---- src/_veewee | 164 ---------------- 22 files changed, 3448 deletions(-) delete mode 100644 src/_celery delete mode 100644 src/_cpanm delete mode 100644 src/_ditz delete mode 100644 src/_dzen2 delete mode 100644 src/_gem delete mode 100644 src/_hledger delete mode 100644 src/_id3 delete mode 100644 src/_id3v2 delete mode 100644 src/_iw delete mode 100644 src/_jekyll delete mode 100644 src/_lein delete mode 100644 src/_logger delete mode 100644 src/_lunar delete mode 100644 src/_manage.py delete mode 100644 src/_pactree delete mode 100644 src/_pear delete mode 100644 src/_primus delete mode 100644 src/_rebar delete mode 100644 src/_socat delete mode 100644 src/_symfony delete mode 100644 src/_tarsnap delete mode 100644 src/_veewee diff --git a/src/_celery b/src/_celery deleted file mode 100644 index 6c2c541..0000000 --- a/src/_celery +++ /dev/null @@ -1,139 +0,0 @@ -#compdef celery -# ------------------------------------------------------------------------------ -# Description -# ----------- -# -# Completion script for celery (https://github.com/celery/celery). -# -# ------------------------------------------------------------------------------ -# Authors -# ------- -# -# * Dong weiming (https://github.com/dongweiming) -# -# ------------------------------------------------------------------------------ - -_celery () { -local -a _1st_arguments ifargs dopts controlargs - -typeset -A opt_args - -_1st_arguments=('worker' 'events' 'beat' 'shell' 'multi' 'amqp' 'status' 'inspect' \ - 'control' 'purge' 'list' 'migrate' 'call' 'result' 'report') -ifargs=('--app=' '--broker=' '--loader=' '--config=' '--version') -dopts=('--detach' '--umask=' '--gid=' '--uid=' '--pidfile=' '--logfile=' '--loglevel=') -controlargs=('--timeout' '--destination') -_arguments \ - '(-A --app=)'{-A,--app}'[app instance to use (e.g. module.attr_name):APP]' \ - '(-b --broker=)'{-b,--broker}'[url to broker. default is "amqp://guest@localhost//":BROKER]' \ - '(--loader)--loader[name of custom loader class to use.:LOADER]' \ - '(--config)--config[Name of the configuration module:CONFIG]' \ - '(--workdir)--workdir[Optional directory to change to after detaching.:WORKING_DIRECTORY]' \ - '(-q --quiet)'{-q,--quiet}'[Don"t show as much output.]' \ - '(-C --no-color)'{-C,--no-color}'[Don"t display colors.]' \ - '(--version)--version[show program"s version number and exit]' \ - '(- : *)'{-h,--help}'[show this help message and exit]' \ - '*:: :->subcmds' && return 0 - -if (( CURRENT == 1 )); then - _describe -t commands "celery subcommand" _1st_arguments - return -fi - -case "$words[1]" in - worker) - _arguments \ - '(-C --concurrency=)'{-C,--concurrency=}'[Number of child processes processing the queue. The default is the number of CPUs.]' \ - '(--pool)--pool=:::(processes eventlet gevent threads solo)' \ - '(--purge --discard)'{--discard,--purge}'[Purges all waiting tasks before the daemon is started.]' \ - '(-f --logfile=)'{-f,--logfile=}'[Path to log file. If no logfile is specified, stderr is used.]' \ - '(--loglevel=)--loglevel=:::(critical error warning info debug)' \ - '(-N --hostname=)'{-N,--hostname=}'[Set custom hostname, e.g. "foo.example.com".]' \ - '(-B --beat)'{-B,--beat}'[Also run the celerybeat periodic task scheduler.]' \ - '(-s --schedule=)'{-s,--schedule=}'[Path to the schedule database if running with the -B option. Defaults to celerybeat-schedule.]' \ - '(-S --statedb=)'{-S,--statedb=}'[Path to the state database.Default: None]' \ - '(-E --events)'{-E,--events}'[Send events that can be captured by monitors like celeryev, celerymon, and others.]' \ - '(--time-limit=)--time-limit=[nables a hard time limit (in seconds int/float) for tasks]' \ - '(--soft-time-limit=)--soft-time-limit=[Enables a soft time limit (in seconds int/float) for tasks]' \ - '(--maxtasksperchild=)--maxtasksperchild=[Maximum number of tasks a pool worker can execute before it"s terminated and replaced by a new worker.]' \ - '(-Q --queues=)'{-Q,--queues=}'[List of queues to enable for this worker, separated by comma. By default all configured queues are enabled.]' \ - '(-I --include=)'{-I,--include=}'[Comma separated list of additional modules to import.]' \ - '(--pidfile=)--pidfile=[Optional file used to store the process pid.]' \ - '(--autoscale=)--autoscale=[Enable autoscaling by providing max_concurrency, min_concurrency.]' \ - '(--autoreload)--autoreload[Enable autoreloading.]' \ - '(--no-execv)--no-execv[Don"t do execv after multiprocessing child fork.]' - compadd -a ifargs - ;; - inspect) - _values -s \ - 'active[dump active tasks (being processed)]' \ - 'active_queues[dump queues being consumed from]' \ - 'ping[ping worker(s)]' \ - 'registered[dump of registered tasks]' \ - 'report[get bugreport info]' \ - 'reserved[dump reserved tasks (waiting to be processed)]' \ - 'revoked[dump of revoked task ids]' \ - 'scheduled[dump scheduled tasks (eta/countdown/retry)]' \ - 'stats[dump worker statistics]' - compadd -a controlargs ifargs - ;; - control) - _values -s \ - 'add_consumer[tell worker(s) to start consuming a queue]' \ - 'autoscale[change autoscale settings]' \ - 'cancel_consumer[tell worker(s) to stop consuming a queue]' \ - 'disable_events[tell worker(s) to disable events]' \ - 'enable_events[tell worker(s) to enable events]' \ - 'pool_grow[start more pool processes]' \ - 'pool_shrink[use less pool processes]' \ - 'rate_limit[tell worker(s) to modify the rate limit for a task type]' \ - 'time_limit[tell worker(s) to modify the time limit for a task type.]' - compadd -a controlargs ifargs - ;; - multi) - _values -s \ - '--nosplash[Don"t display program info.]' \ - '--verbose[Show more output.]' \ - '--no-color[Don"t display colors.]' \ - '--quiet[Don"t show as much output.]' \ - 'start' 'restart' 'stopwait' 'stop' 'show' \ - 'names' 'expand' 'get' 'kill' - compadd -a ifargs - ;; - amqp) - _values -s \ - 'queue.declare' 'queue.purge' 'exchange.delete' 'basic.publish' \ - 'exchange.declare' 'queue.delete' 'queue.bind' 'basic.get' - ;; - list) - _values -s, 'bindings' - ;; - shell) - _values -s \ - '--ipython[force iPython.]' \ - '--bpython[force bpython.]' \ - '--python[force default Python shell.]' \ - '--without-tasks[don"t add tasks to locals.]' \ - '--eventlet[use eventlet.]' \ - '--gevent[use gevent.]' - compadd -a ifargs - ;; - beat) - _arguments \ - '(-s --schedule=)'{-s,--schedule=}'[Path to the schedule database. Defaults to celerybeat-schedule.]' \ - '(-S --scheduler=)'{-S,--scheduler=}'[Scheduler class to use. Default is celery.beat.PersistentScheduler.]' \ - '(--max-interval)--max-interval[]' - compadd -a dopts fargs - ;; - events) - _arguments \ - '(-d --dump)'{-d,--dump}'[Dump events to stdout.]' \ - '(-c --camera=)'{-c,--camera=}'[Take snapshots of events using this camera.]' \ - '(-F --frequency=)'{-F,--frequency=}'[Camera: Shutter frequency. Default is every 1.0 seconds.]' \ - '(-r --maxrate=)'{-r,--maxrate=}'[Camera: Optional shutter rate limit (e.g. 10/m).]' - compadd -a dopts fargs - ;; - *) - ;; - esac -} diff --git a/src/_cpanm b/src/_cpanm deleted file mode 100644 index 8597b1f..0000000 --- a/src/_cpanm +++ /dev/null @@ -1,105 +0,0 @@ -#compdef cpanm -# ------------------------------------------------------------------------------ -# Description -# ----------- -# -# Completion script for cpanm (http://search.cpan.org/dist/App-cpanminus/lib/App/cpanminus.pm). -# -# Source: https://github.com/rshhh/cpanminus/blob/master/etc/_cpanm -# -# ------------------------------------------------------------------------------ -# Authors -# ------- -# -# * Ryushi (https://github.com/rshhh) -# -# ------------------------------------------------------------------------------ - - -local arguments curcontext="$curcontext" -typeset -A opt_args - - -arguments=( - -# Commands -# '(--install -i)'{--install,-i}'[Installs the modules]' - '(- :)--self-upgrade[Upgrades itself]' - '(- :)--info[Displays distribution info on CPAN]' - '(--installdeps)--installdeps[Only install dependencies]' - '(--look)--look[Download/unpack the distribution and then open the directory with your shell]' - '(--uninstall -U)'{--uninstall,-U}'[Uninstalls the modules]' - '(- :)'{--help,-h}'[Displays help information]' - '(- :)'{--version,-V}'[Displays software version]' - -# Options - {--force,-f}'[Force install]' - {--notest,-n}'[Do not run unit tests]' - '(--test-only)--test-only[Run the test only and do not install the module]' - {--sudo,-S}'[sudo to run install commands]' - '(-v --verbose --quiet -q)'{--verbose,-v}'[Turns on chatty output]' - '(-q --quiet --verbose -v)'{--quiet,-q}'[Turns off all output]' - {--local-lib,-l}'[Specify the install base to install modules]' - {--local-lib-contained,-L}'[Specify the install base to install all non-core modules]' - '(--self-contained)--self-contained[Assume no non-core modules are installed on the system]' - '--mirror[Specify the base URL for the mirror (e.g. http://cpan.cpantesters.org/)]:URLs:_urls' - '--mirror-only[Use the mirror\''s index file instead of the CPAN Meta DB]' - '--mirror-index[Specifies the file path for module search index]:FILES:_files' - '--prompt[Prompt when configure/build/test fails]' - '(--dev)--dev[Search for a newer developer release as well]' - '--reinstall[Reinstall the distribution even if you already have the latest version installed]' - '--interactive[Turn on interactive configure]' - '(--pp --pureperl)'{--pp,--pureperl}'[Prefer Pure perl build of modules]' - '(--with-recommends)--with-recommends[Installs dependencies declared as "recommends"]' - '(--with-suggests)--with-suggests[Installs dependencies declared as "suggests"]' - '(--with-feature)--with-feature[Specifies the feature to enable]' - '(--without-feature)--without-feature[Specifies the feature to disable]' - '(--with-all-features)--with-all-features[Enables all the optional features]' - '(--configure-timeout)--configure-timeout[Specify the timeout length to wait for configure]' - '(--build-timeout)--build-timeout[Specify the timeout length to wait for build]' - '(--test-timeout)--test-timeout[Specify the timeout length to wait for test]' - '(--configure-args)--configure-args[Pass arguments for configure commands]' - '(--build-args)--build-args[Pass arguments for build commands]' - '(--test-args)--test-args[Pass arguments for test commands]' - '(--install-args)--install-args[Pass arguments for install commands]' - - '--scandeps[Scan the dependencies of given modules and output the tree in a text format]' - '--format[Specify what format to display the scanned dependency tree]:scandeps format:(tree json yaml dists)' - - '--save-dists[Specify the optional directory path to copy downloaded tarballs]' - '(--uninst-shadows)--uninst-shadows[Uninstalls the shadow files of the distribution that you\''re installing]' - - '(--cascade-search)--cascade-search[Specifies whether to cascade search]' - '(--skip-installed)--skip-installed[Specifies modules which latest version are already installed]' - '(--skip-satisfied)--skip-satisfied[Specifies module and version for skipping installation]' - '(--verify)--verify[Verify the integrity of distribution files]' - '(--no-report-perl-version)--report-perl-version[Report locally installed perl version as part of User-Agent]' - '(--report-perl-version)--no-report-perl-version[Disable --report-perl-version]' - '--auto-cleanup[Number of days that cpanm\''s work directories expire in. Defaults to 7]' - '(--no-man-pages)--man-pages[Generates man pages for executables (man1) and libraries (man3)]' - '(--man-pages)--no-man-pages[Do not generate man pages]' - - - # Note: Normally with "--lwp", "--wget" and "--curl" options set to true (which is the default) cpanm tries LWP, - # Wget, cURL and HTTP::Tiny (in that order) and uses the first one available. - # (So that the exclusions are not enabled here for the completion) - '(--lwp)--lwp[Use LWP module to download stuff]' - '(--wget)--wget[Use GNU Wget (if available) to download stuff]' - '(--curl)--curl[Use cURL (if available) to download stuff]' - -# Other completions - '*:Local directory or archive:_files -/ -g "*.(tar.gz|tgz|tar.bz2|zip)(-.)"' - # '*::args: _normal' # this looks for default files (any files) -) -_arguments -s $arguments \ - && return 0 - -return 1 - -# Local Variables: -# mode: Shell-Script -# sh-indentation: 2 -# indent-tabs-mode: nil -# sh-basic-offset: 2 -# End: -# vim: ft=zsh sw=2 ts=2 et diff --git a/src/_ditz b/src/_ditz deleted file mode 100644 index 70cf552..0000000 --- a/src/_ditz +++ /dev/null @@ -1,53 +0,0 @@ -#compdef ditz -# ------------------------------------------------------------------------------ -# Description -# ----------- -# -# Completion script for Ditz (http://ditz.rubyforge.org). -# -# Source: https://github.com/technolize/zsh-completion-funcs -# -# ------------------------------------------------------------------------------ -# Authors -# ------- -# -# * technolize (https://github.com/technolize) -# -# ------------------------------------------------------------------------------ - - -local ME=ditz -local COMMANDS=--commands -local OPTIONS='' - -if (($CURRENT == 2)); then - # We're completing the first word after the tool: the command. - _wanted command expl "$ME command" \ - compadd -- $( "$ME" "$COMMANDS" ) -else - # Find the options/files/URL/etc. for the current command by using the tool itself. - case "${words[$CURRENT]}"; in - -*) - _wanted args expl "Arguments for $ME ${words[2]}" \ - compadd -- $( "$ME" "${words[2]}" "$OPTIONS" ; _files ) - ;; - ht*|ft*) - _arguments '*:URL:_urls' - ;; - /*|./*|\~*|../*) - _arguments '*:file:_files' - ;; - *) - _wanted args expl "Arguments for $ME ${words[2]}" \ - compadd -- $( "$ME" "${words[2]}" "$OPTIONS" ) - ;; - esac -fi - -# Local Variables: -# mode: Shell-Script -# sh-indentation: 2 -# indent-tabs-mode: nil -# sh-basic-offset: 2 -# End: -# vim: ft=zsh sw=2 ts=2 et diff --git a/src/_dzen2 b/src/_dzen2 deleted file mode 100644 index b0e49d2..0000000 --- a/src/_dzen2 +++ /dev/null @@ -1,44 +0,0 @@ -#compdef dzen2 - -# ------------------------------------------------------------------------------ -# Description -# ----------- -# -# Completion script for dzen2 0.8.5 ( https://github.com/robm/dzen ) -# Last updated: 31.03.2013 -# -# ------------------------------------------------------------------------------ -# Authors -# ------- -# -# * Valodim ( https://github.com/Valodim ) -# -# ------------------------------------------------------------------------------ -# Notes -# ----- -# -# the _x_color completer has rather outdated paths, a zstyle like this helps -# get the x colors right (the list is rather long, then) -# -# zstyle ":completion:*:colors" path '/etc/X11/rgb.txt' -# -# ------------------------------------------------------------------------------ - -_arguments \ - '-fg[Set foreground color]:foreground color:_x_color' \ - '-bg[Set background color]:background color:_x_color' \ - '-fn[Set font]:font:_x_font' \ - '-ta[Set alignment of title window content]:alignment:( l c r )' \ - '-tw[Set title window width]:width (pixels)' \ - '-sa[Set alignment of slave window]:alignment:( l c r )' \ - '-l[Number of lines to display in slave window]:lines' \ - '-e[Set up events and actions]:event string' \ - '-m[Start up in menu mode]' \ - '-u[Update contents of title and slave window simultaneously]' \ - '-p[Persist EOF]:timeout (seconds)' \ - '-x[Set x position on the screen]:x position (pixels)' \ - '-y[Set y position on the screen]:y position (pixels)' \ - '-h[Set line height]:line height (pixels)' \ - '-w[Set window width]:width (pixels)' \ - '-xs[Set the Xinerama screen number where dzen should appear]:screen number' \ - '-v[Display version information]' && return 0 diff --git a/src/_gem b/src/_gem deleted file mode 100644 index 9c816f1..0000000 --- a/src/_gem +++ /dev/null @@ -1,499 +0,0 @@ -#compdef gem gem1.9 macgem -# ------------------------------------------------------------------------------ -# Description -# ----------- -# -# Completion script for gem (http://rubygems.org). -# -# Source: https://gist.github.com/164465 -# -# ------------------------------------------------------------------------------ -# Authors -# ------- -# -# * Alex Vollmer (https://github.com/alexvollmer) -# * Tim Pope (https://github.com/tpope) -# -# ------------------------------------------------------------------------------ - - -gem_general_flags=("(-h --help)"{-h,--help}"[Get help on this command]" - "(-V --verbose)"{-V,--verbose}"[Set the verbose level of output]" - "(-q --quiet)"{-q,--quiet}"[Silence commands]" - "--config-file[Use this config file instead of default]:file:_files" - "--backtrace[Show stack backtrace on errors]" - "--debug[Turn on Ruby debugging]" - $nul_arg -) - -__all_gems() { - _gem_names=($(${service} list | awk '{print $1}')) - compadd "$@" -k _gem_names -} - -__all_gems_all() { - _gem_names=($(gem list | awk '{print $1}') "--all") - compadd "$@" -k _gem_names -} - -__gem_help_arguments() { - _args=("commands" - "examples" - "build" - "cert" - "check" - "cleanup" - "contents" - "dependency" - "environment" - "fetch" - "generate_index" - "help" - "install" - "list" - "lock" - "mirror" - "outdated" - "owner" - "pristine" - "push" - "query" - "rdoc" - "search" - "server" - "sources" - "specification" - "stale" - "tumble" - "uninstall" - "unpack" - "update" - "which") - compadd "$@" -k _args -} - -__gem_trust_policies() { - _args=("NoSecurity" - "LowSecurity" - "MediumSecurity" - "HighSecurity") - compadd "$@" -k _args -} - -_gem_build() { - _arguments \ - *:file:_files -f \ - $gem_general_flags && ret=0 -} - -_gem_cert() { - _arguments \ - "(-a --add)"{-a,--add}"[Add a trusted certificate.]":file:_files \ - "(-l --list)"{-l,--list}"[List trusted certificates.]" \ - "(-r --remove)"{-r,--remove}"[Remove trusted certificates containing STRING.]" \ - "(-b --build)"{-b,--build}"[Build private key and self-signed certificate for EMAIL_ADDR.]" \ - "(-C --certificate)"{-C,--certificate}"[Certificate for --sign command.]":file:_files \ - "(-K --private-key)"{-K,--private-key}"[Private key for --sign command.]":file:_files \ - "(-s --sign)"{-s,--sign}"[Sign a certificate with my key and certificate.]":file:_files \ - $gem_general_flags && ret=0 -} - -_gem_check() { - _arguments \ - "--verify[Verify gem file against its internal checksum]":file:_files \ - "(-a --alien)"{-a,--alien}"[Report 'unmanaged' or rogue files in the gem repository]" \ - "(-v --verbose)"{-v,--verbose}"[Spew more words]" \ - "(-t --test)"{-t,--test}"[Run unit tests for gem]" \ - "(-v --version)"{-v,--version}"[Specify version of gem to run tests for]" \ - $gem_general_flags && ret=0 -} - -_gem_cleanup() { - _arguments \ - "*:gemname:__all_gems" \ - "(-d --dryrun)"{-d,--dryrun}"[]" \ - $gem_general_flags && ret=0 -} - -_gem_contents() { - _arguments \ - "*:gemname:__all_gems" \ - "(-v --version)"{-v,--version}"[Specify version of gem to contents]" \ - "--all[Contents for all gems]" \ - "(-s --spec-dir)"{-s,--spec-dir}"[Search for gems under specific paths]" \ - "(-l --no-lib-only)"{-l,--no-lib-only}"[Only return files in the Gem's lib_dirs]" \ - "--no-prefix[Don't include installed path prefix]" \ - $gem_general_flags && ret=0 -} - -_gem_dependency() { - _arguments \ - ":gemname:__all_gems" \ - "(-l --local)"{-l,--local}"[Restrict operations to the LOCAL domain]" \ - "(-r --remote)"{-r,--remote}"[Restrict operations to the REMOTE domain]" \ - "(-b --both)"{-b,--both}"[Allow LOCAL and REMOTE operations]" \ - "(-B --bulk-threshold)"{-B,--bulk-threshold}"[Threshold for switching to bulk synchronization (default 1000)]" \ - "--source[Use URL as the remote source for gems]" \ - "(-p --[no-]http-proxy)"{-p,--[no-]http-proxy}"[Use HTTP proxy for remote operations]" \ - "(-u --no-update-sources)"{-u,--no-update-sources}"[Update local source cache]" \ - "(-v --version)"{-v,--version}"[Specify version of gem to dependency]" \ - "--platform[Specify the platform of gem to dependency]" \ - "(-R --no-reverse-dependencies)"{-R,--no-reverse-dependencies}"[Include reverse dependencies in the output]" \ - "(-p --pipe)"{-p,--pipe}"[Pipe Format (name --version ver)]" \ - $gem_general_flags && ret=0 -} - -_gem_environment() { - typeset -g _environment_arg= - _environment_arg='::environment:((packageversion\:"display the package version" - gemdir\:"display the path where gems are installed" - gempath\:"display path used to search for gems" - version\:"display the gem format version" - remotesources\:"display the remote gem servers"))' - _arguments \ - $_environment_arg \ - $gem_general_flags && ret=0 -} - -_gem_fetch() { - _arguments \ - "*:gemname:__all_gems" \ - "(-B --bulk-threshold)"{-B,--bulk-threshold}"[Threshold for switching to bulk synchronization (default 1000)]" \ - "(-p --[no-]http-proxy)"{-p,--[no-]http-proxy}"[Use HTTP proxy for remote operations]" \ - "--source[Use URL as the remote source for gems]" \ - "(-v --version)"{-v,--version}"[Specify version of gem to fetch]" \ - "--platform[Specify the platform of gem to fetch]" \ - $gem_general_flags && ret=0 -} - -_gem_generate_index() { - _arguments \ - "(-d --directory=DIRNAME)"{-d,--directory=-}"[repository base dir containing gems subdir]":directory:_directories \ - "--no-legacy[Generate indexes for RubyGems older than 1.2.0]" \ - "--no-modern[Generate indexes for RubyGems newer than 1.2.0]" \ - "--update[Update modern indexes with gems added since the last update]" \ - "--rss-gems-host=-[Host name where gems are served from, used for GUID and enclosure values]" \ - "--rss-host=-[Host name for more gems information, used for RSS feed link]" \ - "--rss-title=-[Set title for RSS feed]" \ - $gem_general_flags && ret=0 -} - -_gem_help() { - _arguments \ - ":argument:__gem_help_arguments" \ - $gem_general_flags && ret=0 -} - -_gem_install() { - _arguments \ - "*:gemname:__all_gems" \ - "(-i --install-dir)"{-i,--install-dir}"[Gem repository directory to get installed gems]":directory:_directories \ - "(-n --bindir)"{-n,--bindir}"[Directory where binary files are located]":directory:_directories \ - "(-d --no-rdoc)"{-d,--no-rdoc}"[Generate RDoc documentation for the gem on install]" \ - "--no-ri[Generate RI documentation for the gem on install]" \ - "(-E --no-env-shebang)"{-E,--no-env-shebang}"[Rewrite the shebang line on installed scripts to use /usr/bin/env]" \ - "(-f --no-force)"{-f,--no-force}"[Force gem to install, bypassing dependency checks]" \ - "(-t --no-test)"{-t,--no-test}"[Run unit tests prior to installation]" \ - "(-w --no-wrappers)"{-w,--no-wrappers}"[Use bin wrappers for executables Not available on dosish platforms]" \ - "(-P --trust-policy)"{-P,--trust-policy}"[Specify gem trust policy]:trust policy:__gem_trust_policies" \ - "--ignore-dependencies[Do not install any required dependent gems]" \ - "(-y --include-dependencies)"{-y,--include-dependencies}"[Unconditionally install the required dependent gems]" \ - "--no-format-executable[Make installed executable names match ruby. If ruby is ruby18, foo_exec will be foo_exec18]" \ - "--no-user-install[Install in user's home directory instead of GEM_HOME. Defaults to using home only if GEM_HOME is not writable.]" \ - "--development[Install any additional development dependencies]" \ - "--prerelease[Install prerelease versions of a gem if available. Defaults to skipping prereleases.]" \ - "(-l --local)"{-l,--local}"[Restrict operations to the LOCAL domain]" \ - "(-r --remote)"{-r,--remote}"[Restrict operations to the REMOTE domain]" \ - "(-b --both)"{-b,--both}"[Allow LOCAL and REMOTE operations]" \ - "(-B --bulk-threshold)"{-B,--bulk-threshold}"[Threshold for switching to bulk synchronization (default 1000)]" \ - "--source[Use URL as the remote source for gems]" \ - "(-p --[no-]http-proxy)"{-p,--[no-]http-proxy}"[Use HTTP proxy for remote operations]" \ - "(-u --no-update-sources)"{-u,--no-update-sources}"[Update local source cache]" \ - "--platform[Specify the platform of gem to install]" \ - "(-v --version)"{-v,--version}"[Specify version of gem to install]" \ - $gem_general_flags && ret=0 -} - -_gem_list() { - _arguments \ - ":gem name: " \ - "(-i --no-installed)"{-i,--no-installed}"[Check for installed gem]" \ - "(-v --version)"{-v,--version}"[Specify version of gem to list]" \ - "(-d --no-details)"{-d,--no-details}"[Display detailed information of gem(s)]" \ - "--no-versions[Display only gem names]" \ - "(-a --all)"{-a,--all}"[Display all gem versions]" \ - "--prerelease[Display prerelease versions]" \ - "(-l --local)"{-l,--local}"[Restrict operations to the LOCAL domain]" \ - "(-r --remote)"{-r,--remote}"[Restrict operations to the REMOTE domain]" \ - "(-b --both)"{-b,--both}"[Allow LOCAL and REMOTE operations]" \ - "(-B --bulk-threshold)"{-B,--bulk-threshold}"[Threshold for switching to bulk synchronization (default 1000)]" \ - "--source[Use URL as the remote source for gems]" \ - "(-p --[no-]http-proxy)"{-p,--[no-]http-proxy}"[Use HTTP proxy for remote operations]" \ - "(-u --no-update-sources)"{-u,--no-update-sources}"[Update local source cache]" \ - $gem_general_flags && ret=0 -} - -_gem_lock() { - _arguments \ - ":gemname:__all_gems" \ - "(-s --no-strict)"{-s,--no-strict}"[fail if unable to satisfy a dependency]" \ - $gem_general_flags && ret=0 -} - -_gem_mirror() { - _arguments \ - $gem_general_flags && ret=0 -} - -_gem_open() { - _arguments \ - "*:gemname:__all_gems" \ - "(-v --version)"{-v,--version}"[Specify version of gem to open]" -} - -_gem_outdated() { - _arguments \ - "(-l --local)"{-l,--local}"[Restrict operations to the LOCAL domain]" \ - "(-r --remote)"{-r,--remote}"[Restrict operations to the REMOTE domain]" \ - "(-b --both)"{-b,--both}"[Allow LOCAL and REMOTE operations]" \ - "(-B --bulk-threshold)"{-B,--bulk-threshold}"[Threshold for switching to bulk synchronization (default 1000)]" \ - "--source[Use URL as the remote source for gems]" \ - "(-p --[no-]http-proxy)"{-p,--[no-]http-proxy}"[Use HTTP proxy for remote operations]" \ - "(-u --no-update-sources)"{-u,--no-update-sources}"[Update local source cache]" \ - "--platform[Specify the platform of gem to outdated]" \ - $gem_general_flags && ret=0 -} - -_gem_owner() { - _arguments \ - "(-a --add)"{-a,--add}"[Add an owner]" \ - "(-r --remove)"{-r,--remove}"[Remove an owner]" \ - $gem_general_flags && ret=0 -} - -_gem_pristine() { - _arguments \ - ":gem name:__all_gems_all" \ - "--all[Restore all installed gems to pristine condition]" \ - "(-v --version)"{-v,--version}"[Specify version of gem to restore to pristine condition]" \ - $gem_general_flags && ret=0 -} - -_gem_push() { - _arguments \ - *:file:_files -f \ - "(-p --http-proxy)"{-p,--http-proxy}"[Use HTTP proxy for remote operations]" \ - $gem_general_flags && ret=0 -} - -_gem_query() { - _arguments \ - "(-i --no-installed)"{-i,--no-installed}"[Check for installed gem]" \ - "(-v --version)"{-v,--version}"[Specify version of gem to query]" \ - "(-n --name-matches)"{-n,--name-matches}"[Name of gem(s) to query on matches the provided REGEXP]" \ - "(-d --no-details)"{-d,--no-details}"[Display detailed information of gem(s)]" \ - "--no-versions[Display only gem names]" \ - "(-a --all)"{-a,--all}"[Display all gem versions]" \ - "--prerelease[Display prerelease versions]" \ - "(-l --local)"{-l,--local}"[Restrict operations to the LOCAL domain]" \ - "(-r --remote)"{-r,--remote}"[Restrict operations to the REMOTE domain]" \ - "(-b --both)"{-b,--both}"[Allow LOCAL and REMOTE operations]" \ - "(-B --bulk-threshold)"{-B,--bulk-threshold}"[Threshold for switching to bulk synchronization (default 1000)]" \ - "--source[Use URL as the remote source for gems]" \ - "(-p --[no-]http-proxy)"{-p,--[no-]http-proxy}"[Use HTTP proxy for remote operations]" \ - "(-u --no-update-sources)"{-u,--no-update-sources}"[Update local source cache]" \ - $gem_general_flags && ret=0 -} - -_gem_rdoc() { - _arguments \ - ":gem name:__all_gems_all" \ - "--all[Generate RDoc/RI documentation for all installed gems]" \ - "--no-rdoc[Include RDoc generated documents]" \ - "--no-ri[Include RI generated documents]" \ - "(-v --version)"{-v,--version}"[Specify version of gem to rdoc]" \ - $gem_general_flags && ret=0 -} - -_gem_search() { - _arguments \ - ":gem name::" \ - "(-i --no-installed)"{-i,--no-installed}"[Check for installed gem]" \ - "(-v --version)"{-v,--version}"[Specify version of gem to search]" \ - "(-d --no-details)"{-d,--no-details}"[Display detailed information of gem(s)]" \ - "--no-versions[Display only gem names]" \ - "(-a --all)"{-a,--all}"[Display all gem versions]" \ - "--prerelease[Display prerelease versions]" \ - "(-l --local)"{-l,--local}"[Restrict operations to the LOCAL domain]" \ - "(-r --remote)"{-r,--remote}"[Restrict operations to the REMOTE domain]" \ - "(-b --both)"{-b,--both}"[Allow LOCAL and REMOTE operations]" \ - "(-B --bulk-threshold)"{-B,--bulk-threshold}"[Threshold for switching to bulk synchronization (default 1000)]" \ - "--source[Use URL as the remote source for gems]" \ - "(-p --[no-]http-proxy)"{-p,--[no-]http-proxy}"[Use HTTP proxy for remote operations]" \ - "(-u --no-update-sources)"{-u,--no-update-sources}"[Update local source cache]" \ - $gem_general_flags && ret=0 -} - -_gem_server() { - _arguments \ - "(-p --port=PORT)"{-p,--port=-}"[port to listen on]" \ - "(-d --dir=GEMDIR)"{-d,--dir=-}"[directory from which to serve gems]":directory:_directories \ - "--no-daemon[run as a daemon]" \ - $gem_general_flags && ret=0 -} - -_gem_sources() { - _arguments \ - "(-a --add)"{-a,--add}"[Add source]" \ - "(-l --list)"{-l,--list}"[List sources]" \ - "(-r --remove)"{-r,--remove}"[Remove source]" \ - "(-c --clear-all)"{-c,--clear-all}"[Remove all sources (clear the cache)]" \ - "(-u --update)"{-u,--update}"[Update source cache]" \ - "(-p --[no-]http-proxy)"{-p,--[no-]http-proxy}"[Use HTTP proxy for remote operations]" \ - $gem_general_flags && ret=0 -} - -_gem_specification() { - _arguments \ - ":gemname:__all_gems" \ - "(-l --local)"{-l,--local}"[Restrict operations to the LOCAL domain]" \ - "(-r --remote)"{-r,--remote}"[Restrict operations to the REMOTE domain]" \ - "(-b --both)"{-b,--both}"[Allow LOCAL and REMOTE operations]" \ - "(-B --bulk-threshold)"{-B,--bulk-threshold}"[Threshold for switching to bulk synchronization (default 1000)]" \ - "--source[Use URL as the remote source for gems]" \ - "(-p --[no-]http-proxy)"{-p,--[no-]http-proxy}"[Use HTTP proxy for remote operations]" \ - "(-u --no-update-sources)"{-u,--no-update-sources}"[Update local source cache]" \ - "(-v --version)"{-v,--version}"[Specify version of gem to examine]" \ - "--platform[Specify the platform of gem to specification]" \ - "--all[Output specifications for all versions of the gem]" \ - "--ruby[Output ruby format]" \ - "--yaml[Output RUBY format]" \ - "--marshal[Output Marshal format]" \ - $gem_general_flags && ret=0 -} - -_gem_stale() { - _arguments \ - $gem_general_flags && ret=0 -} - -_gem_tumble() { - _arguments \ - $gem_general_flags && ret=0 -} - -_gem_uninstall() { - _arguments \ - "*:gemname:__all_gems" \ - "(-a --no-all)"{-a,--no-all}"[Uninstall all matching versions]" \ - "(-I --no-ignore-dependencies)"{-I,--no-ignore-dependencies}"[Ignore dependency requirements while uninstalling]" \ - "(-x --no-executables)"{-x,--no-executables}"[Uninstall applicable executables without confirmation]" \ - "(-i --install-dir)"{-i,--install-dir}"[Directory to uninstall gem from]":directory:_directories \ - "(-n --bindir)"{-n,--bindir}"[Directory to remove binaries from]":directory:_directories \ - "--no-user-install[Uninstall from user's home directory in addition to GEM_HOME.]" \ - "(-v --version)"{-v,--version}"[Specify version of gem to uninstall]" \ - "--platform[Specify the platform of gem to uninstall]" \ - $gem_general_flags && ret=0 -} - -_gem_unpack() { - _arguments \ - ":gemname:__all_gems" \ - "--target=-[target directory for unpacking]":directory:_directories \ - "(-v --version)"{-v,--version}"[Specify version of gem to unpack]" \ - $gem_general_flags && ret=0 -} - -_gem_update() { - _arguments \ - "*:gemname:__all_gems" \ - "(-i --install-dir)"{-i,--install-dir}"[Gem repository directory to get installed gems]":directory:_directories \ - "(-n --bindir)"{-n,--bindir}"[Directory where binary files are located]":directory:_directories \ - "(-d --no-rdoc)"{-d,--no-rdoc}"[Generate RDoc documentation for the gem on install]" \ - "--no-ri[Generate RI documentation for the gem on install]" \ - "(-E --no-env-shebang)"{-E,--no-env-shebang}"[Rewrite the shebang line on installed scripts to use /usr/bin/env]" \ - "(-f --no-force)"{-f,--no-force}"[Force gem to install, bypassing dependency checks]" \ - "(-t --no-test)"{-t,--no-test}"[Run unit tests prior to installation]" \ - "(-w --no-wrappers)"{-w,--no-wrappers}"[Use bin wrappers for executables Not available on dosish platforms]" \ - "(-P --trust-policy)"{-P,--trust-policy}"[Specify gem trust policy]:trust policy:__gem_trust_policies" \ - "--ignore-dependencies[Do not install any required dependent gems]" \ - "(-y --include-dependencies)"{-y,--include-dependencies}"[Unconditionally install the required dependent gems]" \ - "--no-format-executable[Make installed executable names match ruby. If ruby is ruby18, foo_exec will be foo_exec18]" \ - "--no-user-install[Install in user's home directory instead of GEM_HOME. Defaults to using home only if GEM_HOME is not writable.]" \ - "--development[Install any additional development dependencies]" \ - "--prerelease[Install prerelease versions of a gem if available. Defaults to skipping prereleases.]" \ - "(-l --local)"{-l,--local}"[Restrict operations to the LOCAL domain]" \ - "(-r --remote)"{-r,--remote}"[Restrict operations to the REMOTE domain]" \ - "(-b --both)"{-b,--both}"[Allow LOCAL and REMOTE operations]" \ - "(-B --bulk-threshold)"{-B,--bulk-threshold}"[Threshold for switching to bulk synchronization (default 1000)]" \ - "--source[Use URL as the remote source for gems]" \ - "(-p --[no-]http-proxy)"{-p,--[no-]http-proxy}"[Use HTTP proxy for remote operations]" \ - "(-u --no-update-sources)"{-u,--no-update-sources}"[Update local source cache]" \ - "--system[Update the RubyGems system software]" \ - "--platform[Specify the platform of gem to update]" \ - $gem_general_flags && ret=0 -} - -_gem_which() { - _arguments \ - *:file:_files -f \ - "(-a --no-all)"{-a,--no-all}"[show all matching files]" \ - "(-g --no-gems-first)"{-g,--no-gems-first}"[search gems before non-gems]" \ - $gem_general_flags && ret=0 -} - -_gem_migrate() { - _arguments \ - "*:gemname:__all_gems" \ - $gem_general_flags && ret=0 -} - -if (( CURRENT > 2 )); then - (( CURRENT-- )) - shift words - _call_function 1 _gem_${words[1]} -else - _values "gem command" \ - "build[Build a gem from a gemspec]" \ - "cert[Manage RubyGems certificates and signing settings]" \ - "check[Check installed gems]" \ - "cleanup[Clean up old versions of installed gems in the local repository]" \ - "contents[Display the contents of the installed gems]" \ - "dependency[Show the dependencies of an installed gem]" \ - "environment[Display information about the RubyGems environment]" \ - "fetch[Download a gem and place it in the current directory]" \ - "generate_index[Generates the index files for a gem server directory]" \ - "help[Provide help on the 'gem' command]" \ - "install[Install a gem into the local repository]" \ - "list[Display gems whose name starts with STRING]" \ - "lock[Generate a lockdown list of gems]" \ - "migrate[Migrate a gem you own from Rubyforge to Gemcutter]" \ - "mirror[Mirror a gem repository]" \ - "open[Open a gem in your editor]" \ - "outdated[Display all gems that need updates]" \ - "owner[Manage gem owners on Gemcutter]" \ - "pristine[Restores installed gems to pristine condition from files located in the gem cache]" \ - "push[Push a gem up to Gemcutter]" \ - "query[Query gem information in local or remote repositories]" \ - "rdoc[Generates RDoc for pre-installed gems]" \ - "search[Display all gems whose name contains STRING]" \ - "server[Documentation and gem repository HTTP server]" \ - "sources[Manage the sources and cache file RubyGems uses to search for gems]" \ - "specification[Display gem specification (in yaml)]" \ - "stale[List gems along with access times]" \ - "tumble[Enable or disable Gemcutter as your primary gem source]" \ - "uninstall[Uninstall gems from the local repository]" \ - "unpack[Unpack an installed gem to the current directory]" \ - "update[Update the named gems (or all installed gems) in the local repository]" \ - "which[Find the location of a library file you can require]" -fi - -# Local Variables: -# mode: Shell-Script -# sh-indentation: 2 -# indent-tabs-mode: nil -# sh-basic-offset: 2 -# End: -# vim: ft=zsh sw=2 ts=2 et - - diff --git a/src/_hledger b/src/_hledger deleted file mode 100644 index 156bf92..0000000 --- a/src/_hledger +++ /dev/null @@ -1,177 +0,0 @@ -#compdef hledger - -# ------------------------------------------------------------------------------ -# Description -# ----------- -# -# Completion script for hleder 0.23.2 ( http://hledger.org/ ) -# Last updated: 16.11.2014 -# -# ------------------------------------------------------------------------------ -# Authors -# ------- -# -# * Valodim ( https://github.com/Valodim ) -# -# ------------------------------------------------------------------------------ -# Notes -# ----- -# -# account completion depends on availability of a ~/.hledger.journal file -# -# ------------------------------------------------------------------------------ - - -local curcontext="$curcontext" curstate state line expl grp cmd ret=1 -typeset -a args -typeset -A opt_args - -args=( - '(- *)'{-h,--help}'[print help information]' - '(-f --file)'{-f,--file}'=[use a different input file]:input file:_files' - '--rules-file=[CSV conversion rules file]:rules file:_files' - '--alias=[display accounts named OLD as NEW]:alias specification' - '(-b --begin)'{-b,--begin}'=[include postings/txns on or after this date]:date' - '(-e --end)'{-e,--end}'=[include postings/txns before this date]:date' - '(-D --daily)'{-D,--daily}'[multiperiod/multicolumn report by day]' - '(-W --weekly)'{-W,--weekly}'[multiperiod/multicolumn report by week]' - '(-M --monthly)'{-M,--monthly}'[multiperiod/multicolumn report by month]' - '(-Q --quarterly)'{-Q,--quarterly}'[multiperiod/multicolumn report by quarter]' - '(-Y --yearly)'{-Y,--yearly}'[multiperiod/multicolumn report by year]' - '(-p --period)'{-p,--period}'=[set start date, end date, and/or reporting interval all at once]' - '(-C --cleared)'{-C,--cleared}'[include only cleared postings/txns]' - '(-U --uncleared)'{-U,--uncleared}'[include only uncleared postings/txns]' - '(-R --real)'{-R,--real}'[include only non-virtual postings]' - '(--depth)--depth=[hide accounts/postings deeper than N]:depth' - '(-E --empty)'{-E,--empty}'[show empty/zero things which are normally omitted]' - '(-B --cost)'{-B,--cost}'[show amounts in their cost price'\''s commodity]' -) - -_arguments -C "$args[@]" -A "-*" \ - '(- *)--version[print version information]' \ - '--debug[show debug output]' \ - '1: :->cmds' \ - '*:: :->args' && ret=0 - -while (( $#state )); do - curstate=$state - shift state - case $curstate in - cmds) - typeset -a cmds - cmds=( - 'print:show transaction entries' - 'accounts:show account names' - 'balance:show accounts and balances (bal)' - 'register:show postings and running total (reg)' - 'incomestatement:show an income statement (is)' - 'balancesheet:show a balance sheet (bs)' - 'cashflow:show a cashflow statement (cf)' - 'activity:show an ascii barchart of posting counts per interval' - 'stats:show some journal statistics' - ) - _describe 'subcommands' cmds && ret=0 - ;; - args) - : $words - local cmd=$words[1] - (( $+cmd )) || return 1 - # curcontext="${curcontext%:*:*}:$service-$cmd:" - case $cmd in - accounts) - args+=( - '(--tree)--tree[show accounts as a tree (default in simple reports)]' - '(--flat)--flat[show accounts as a list (default in multicolumn)]' - '(--drop)--drop=[flat mode, omit N leading account name parts]:drop n' - ) - ;; - activity) - ;; - bal|balance) - args+=( - '(--tree)--tree[show accounts as a tree (default in simple reports)]' - '(--flat)--flat[show accounts as a list (default in multicolumn)]' - '(--drop)--drop=[in flat mode, omit N leading account name parts]:drop n' - '(--format)--format=[in tree mode, use this custom line format]:custom line format' - '(--no-elide)--no-elide[tree mode, do not squash boring parent accounts]' - '(--no-total)--no-total[do not show the final total]' - '(--cumulative)--cumulative[multicolumn mode, show accumulated ending balances]' - '(-H --historical)'{-H,--historical}'[multicolumn mode, show historical ending balances]' - ) - ;; - cashflow|cf|balancesheet|bs|incomestatement|is) - args+=( - '(--flat)--flat[show accounts as a list (default in multicolumn)]' - '(--drop)--drop=[in flat mode, omit N leading account name parts]:drop n' - ) - ;; - print) - ;; - register|reg) - args+=( - '(-H --historical)'{-H,--historical}'[include prior postings in the running total]' - '(-A --average)'{-A,--average}'[show a running average instead of the running total]' - '(-r --related)'{-r,--related}'[show postings'\'' siblings instead]' - '(-w --width)'{-w,--width}'=[set output width to 120, or N]:width (default 80)' - ) - ;; - stats) - ;; - # fallback to _default - *) _arguments -C -A "-*" "$args[@]" \ - '*: :_default' && ret=0 - continue - esac - _arguments -C -A "-*" "$args[@]" \ - '*:query patterns:->query' && ret=0 - ;; - query) - - local -a accs keywords - keywords=( - 'code\::match by transaction code' - 'desc\::match transaction descriptions' - 'tag\::match by tag name' - 'depth\::match at or above depth' - 'status\::match cleared/uncleared transactions' - 'real\::match real/virtual transactions' - 'empty\::match if amount is/is not zero' - 'amt\::match transaction amount' - ) - if compset -P 'amt:'; then - _message 'match amount (<, <=, >, >=, add sign for non-absolute match)' && ret=0 - continue - fi - if compset -P '(#b)(code|desc|tag|depth|status|real|empty):'; then - _message "'$match[1]' parameter" && ret=0 - continue - fi - - accs=( ${(f)"$(_call_program hledger hledger accounts $PREFIX 2>/dev/null)"} ) - if (( $? )); then - _message "error fetching accounts from hledger" - fi - - # decided against partial matching here. these lines can - # be uncommented to complete subaccounts hierarchically - # (add -S '' -q to the compadd below, too) - # if compset -P '(#b)(*):'; then - # accs=( ${(M)accs:#$match[1]:*} ) - # accs=( ${accs#$IPREFIX} ) - # fi - # accs=( ${accs%%:*} ) - - _wanted accounts expl "accounts" compadd -a accs && ret=0 - _describe "matcher keywords" keywords -S '' && ret=0 - - # not is special, it doesn't need the -S '' - keywords=( - 'not:negate expression' - ) - _describe "matcher keywords" keywords && ret=0 - - ;; - esac -done - -return ret diff --git a/src/_id3 b/src/_id3 deleted file mode 100644 index df4f1de..0000000 --- a/src/_id3 +++ /dev/null @@ -1,70 +0,0 @@ -#compdef id3 - -# ------------------------------------------------------------------------------ -# Description -# ----------- -# -# Completion script for id3, based on v0.15 -# -# Last updated: 03.04.2013 -# -# ------------------------------------------------------------------------------ -# Authors -# ------- -# -# * Valodim ( https://github.com/Valodim ) -# -# ------------------------------------------------------------------------------ - -_id3_genre () { - - setopt localoptions extendedglob - - local -A _id3_genres - # got them cached? - if _cache_invalid id3-genres || ! _retrieve_cache id3-genres ; then - - # generate from id3 -L otherwise - local tmp - for line in ${${${(f)"$(_call_program id3genre id3 -L)"}## #}}; do - tmp=( ${(s,: ,)line} ) - _id3_genres[${tmp[1]}]=$tmp[2] - # alternate display string, which I decided against in the end - # to preserve reasonable alphabetic sorting - # "${(l:3:: :)${tmp[1]}}: ${tmp[2]}" - done - - # store if we got any - (( $#_id3_genres > 0 )) && _store_cache id3-genres _id3_genres - fi - - # bail if we don't - (( $#_id3_genres > 0 )) || { _message "could not fetch genres"; return } - - _wanted id3genres expl 'Genres' \ - compadd -d _id3_genres -k _id3_genres && return 0 - -} - -# only show files if at least one argument or something has been provided -local showfiles='' -(( CURRENT <= 2 )) && showfiles='!' - -_arguments \ - - tagging \ - '-t[modify title tag]:title' \ - '-T[modify track tag]:track' \ - '-a[modify artist tag]:artist' \ - '-A[modify album tag]:album' \ - '-y[modify year tag]:year' \ - '-c[modify comment tag]:comment' \ - '-g[modify genre tag]:genre:_id3_genre' \ - '(-)-l[lists tags]' \ - '-R[use rfc822-style format for output]' \ - '(-)-d[delete id3 tag]' \ - $showfiles'*:mp3 file:_files -g \*.mp3' \ - - meta \ - '(- *)-L[list all genres]' \ - '(- *)-h[display help info]' \ - '(- *)-v[print version info]' && return 0 - diff --git a/src/_id3v2 b/src/_id3v2 deleted file mode 100644 index edae6e7..0000000 --- a/src/_id3v2 +++ /dev/null @@ -1,116 +0,0 @@ -#compdef id3v2 - -# ------------------------------------------------------------------------------ -# Description -# ----------- -# -# Completion script for id3v2, based on v0.1.12 -# -# Last updated: 05.04.2013 -# -# ------------------------------------------------------------------------------ -# Authors -# ------- -# -# * Valodim ( https://github.com/Valodim ) -# -# ------------------------------------------------------------------------------ - -_id3v2_genre () { - - setopt localoptions extendedglob - - local -A _id3v2_genres - # got them cached? - if _cache_invalid id3v2-genres || ! _retrieve_cache id3v2-genres ; then - - # generate from id3 -L otherwise - local tmp - for line in ${${${(f)"$(_call_program id3v2genres id3v2 -L)"}## #}}; do - tmp=( ${(s,: ,)line} ) - _id3v2_genres[${tmp[1]}]=$tmp[2] - # alternate display string, which I decided against in the end - # to preserve reasonable alphabetic sorting - # "${(l:3:: :)${tmp[1]}}: ${tmp[2]}" - done - - # store if we got any - (( $#_id3v2_genres > 0 )) && _store_cache id3v2-genres _id3v2_genres - fi - - # bail if we don't - (( $#_id3v2_genres > 0 )) || { _message "could not fetch genres"; return } - - _wanted id3v2genres expl 'Genres' \ - compadd -d _id3v2_genres -k _id3v2_genres && return 0 - -} - -# this function assumes _id3v2_frames is defined! -_id3v2_frame () { - - (( $#_id3v2_frames > 0 )) || { _message "could not fetch genres"; return } - local -a framenames - framenames=( ${_id3v2_frames#--} ) - _describe -t framenames 'id3v2 frames' framenames - -} - -_id3v2 () { - - setopt localoptions extendedglob - - # previous word was a frame name? this is an argument, then. - if [[ $words[$CURRENT-1] == --[A-Z](#c4) ]]; then - _message 'frame value' - return 0 - fi - - # load frame names - local -a _id3v2_frames - if _cache_invalid id3v2-frames || ! _retrieve_cache id3v2-frames ; then - _id3v2_frames=( ${${${(f)"$(_call_program id3v2frames id3v2 -f)"}## #}/ /:} ) - (( $#_id3v2_frames > 0 )) && _store_cache id3v2-frames _id3v2_frames - fi - - local ret=1 - - # if we already have a -- prefix, show all those frames - if [[ -prefix -- ]] && (( $#_id3v2_frames > 0 )); then - _describe -t frames 'id3v2 frames' _id3v2_frames && ret=0 - fi - - local showfiles='' - (( CURRENT <= 2 )) && showfiles='!' - - # regular arguments either way - _arguments \ - - tagging \ - '(-s --delete-v1 -d --delete-v2)'{-s,--delete-v1}'[deletes id3v1 tags]' \ - '(-s --delete-v1 -d --delete-v2)'{-d,--delete-v2}'[deletes id3v2 tags]' \ - '(-C --convert)'{-C,--convert}'[converts id3v1 tag to id3v2]' \ - '(-1 --id3v1-only -2 --id3v2-only)'{-1,--id3v1-only}'[write only id3v1 tag]' \ - '(-1 --id3v1-only -2 --id3v2-only)'{-2,--id3v2-only}'[write only id3v2 tag]' \ - '(-r --remove-frame)'{-r,--remove-frame}'[removes specified id3v2 frame]:frame id:_id3v2_frame' \ - '(-a --artist)'{-a,--artist}'[set artist]:artist' \ - '(-A --album)'{-A,--album}'[set album title]:album' \ - '(-t --song)'{-t,--song}'[set song title]:song title' \ - '(-c --comment)'{-c,--comment}'[set comment field]' \ - '(-g --genre)'{-g,--genre}'[set the genre number]:genre:_id3v2_genre' \ - '(-y --year)'{-y,--year}'[set the year]:year' \ - '(-T --track)'{-T,--track}'[set the track number/(optional) total tracks]:track number (current/total)' \ - '(-R --list-rfc822)'{-R,--list-rfc822}'[lists using an rfc822-style format for output]' \ - '(-)'{-D,--delete-all}'[deletes both id3v1 and id3v2 tags]' \ - '(-)'{-l,--list}'[lists the tag(s) on the file(s)]' \ - $showfiles'*:mp3 file:_files -g "*.mp3"' \ - - meta \ - '(- *)'{-f,--list-frames}'[display all possible frames for id3v2]' \ - '(- *)'{-L,--list-genres}'[lists all id3v1 genres]' \ - '(- *)'{-h,--help}'[display help and exit]' \ - '(- *)'{-v,--version}'[display version information and exit]' && ret=0 - - return ret - -} - -_id3v2 "$@" diff --git a/src/_iw b/src/_iw deleted file mode 100644 index 6217a33..0000000 --- a/src/_iw +++ /dev/null @@ -1,247 +0,0 @@ -#compdef iw - -# Some parameters to hold patterns that will be used later. -local xp='[[:xdigit:]][[:xdigit:]]' -local -a bssid devices flags fouraddr fouronoff frequency high_throughput ifacename ifacetype ifacetypes -local -a matchany matchnum key lladdr lladdrs meshid meshidval ssid value -# matches any word -matchany=(/$'[^\0]##\0'/) -# matches any number -matchnum=(/$'[[:digit:]]##\0'/) -# matches any BSSID -bssid=($matchany ':bssid:BSSID:') -# matches any devices -devices=( /$'[[:alpha:]]##[[:digit:]]##(\.[[:digit:]]##)#\0'/ ':interfaces:network_interface:_net_interfaces' ) -# matches the word 'flags' followed by a list of some of the following words: none fcsfail control otherbss cook -flags=(/$'flags\0'/ ':flags:flags:(flags)' $matchany ':flags:flags:(none fcsfail control otherbss cook)' \#) -# matches the word '4addr' followed by either 'on' or 'off' -fouronoff=(/$'(on|off)\0'/ ':4addr:4addr:(on off)') -fouraddr=( /$'4addr\0'/ ':4addr:4addr:(4addr)' $fouronoff ) -# matches any number (description is 'frequency') -frequency=($matchnum ':freq:frequency:') -# matches one of HT20 HT40+ or HT40- -high_throughput=(/$'HT[0-9]##(+|-)#\0'/ ':HT:high throughput:(HT20 HT40+ HT40-)') -# matches any name (description is 'name') -ifacename=($matchany ':name:name:') -# matches the word 'type' followed by one of: managed ibss monitor mesh wds -ifacetypes=(/$'(managed|ibss|monitor|mesh|wds)\0'/ ':type:type:(managed ibss monitor mesh wds)') -ifacetype=(/$'type\0'/ ':type:type:(type)' $ifacetypes) -# matches any word (description is 'key') -key=($matchany ':key:key:') -# matches a MAC address (i.e. a sequence of six 2-digit numbers separated by spaces), $xp is defined earlier. -lladdr=(/"${xp}:${xp}:${xp}:${xp}:${xp}:${xp}"$'\0'/ ':lladdress:link layer (MAC) address:') -# as above but with a different description -lladdrs=(/"${xp}:${xp}:${xp}:${xp}:${xp}:${xp}"$'\0'/ ':lladdress:link layer (MAC) addresses (use - to match any octet):' \#) -# matches the word 'mesh_id' followed by a number -meshidval=($matchnum ':meshid:mesh ID:') -meshid=(/$'mesh_id\0'/ ':meshid:meshid:(mesh_id)' $meshidval) -# matches any word (description 'SSID') -ssid=($matchany ':ssid:SSID:') -# matches any word (description 'value') -value=($matchany ':val:value:') -# matches any number (description 'value') -numvalue=($matchnum ':val:value:') - -# Use the _regex_words function to create a variable containing command words to go after "iw reg" -local -a reg_cmds -_regex_words regulatory-commands "reg command" \ - 'g*et:print out the kernels current regulatory domain information'\ - 's*et:notify the kernel about the current regulatory domain' -reg_cmds=("$reply[@]") - -# Options for to go after "iw event" -local -a event_opts -_regex_words event-options "event option" \ - '-t:print timestamp' \ - '-r:print relative timestamp' \ - '-f:print full frame for auth/assoc etc' -event_opts=("$reply[@]") - -# Commands to go after "iw phy wowlan enable" -local -a phy_wowlan_enable_cmds -_regex_words phy-wowlan-enable-commands "phy WoWLAN enable commands" \ - '4*way-handshake:enable WoWLAN with 4way handshake trigger' \ - 'a*ny:enable WoWLAN with any trigger' \ - 'd*isconnect:enable WoWLAN with disconnect trigger' \ - 'e*ap-identity-request:enable WoWLAN with EAP identity request trigger' \ - 'g*tk-rekey-failure:enable WoWLAN with gtk rekey failure trigger' \ - 'm*agic-packet:enable WoWLAN with magic packet trigger' \ - 'p*atterns:MAC address triggers:$lladdrs' \ - 'r*fkill-release:enable WoWLAN with rfkill release trigger' -phy_wowlan_enable_cmds=("$reply[@]") - -# Commands to go after "iw phy wowlan" -local -a phy_wowlan_cmds -_regex_words phy-wowlan-commands "phy WoWLAN commands" \ - 's*how:show WoWLAN status' \ - 'd*isable:disable WoWLAN' \ - 'e*nable:enable WoWLAN:$phy_wowlan_enable_cmds' -phy_wowlan_cmds=("$reply[@]") - -# Some parameters to hold patterns that will be used for "iw phy set" commands -# (not perfect, but mostly OK). -local -a phy_set_antenna phy_set_channel phy_set_coverage phy_set_frag phy_set_freq phy_set_distance -local -a phy_set_name phy_set_netns phy_set_rts phy_set_txpower phy_txpower_opt -phy_set_antenna=($matchany ':antenna:bitmap:') -phy_set_channel=($matchnum ':channel:channel (1-14):' $high_throughput) -phy_set_coverage=($matchnum ':coverage:coverage class (0-255):') -phy_set_distance=($matchnum ':distance:valid values\: 0 - 114750:') -phy_set_frag=(/$'([0-9]##|off)\0'/ ':channel:channel (1-14):(1 2 3 4 5 6 7 8 9 10 11 12 13 14 off)') -phy_set_freq=($frequency $high_throughput) -phy_set_name=($matchany ':name:device name:') -phy_set_netns=($matchany ':netns:network namespace:') -phy_set_rts=($matchnum ':rts:rts threshold:') -phy_txpower_opt=($matchany ':txpower:tx power in mBm:') -_regex_words phy-set-txpower "set txpower" \ - 'a*uto:auto:' \ - 'f*ixed:fixed:$phy_txpower_opt' \ - 'l*imit:limit:$phy_txpower_opt' -phy_set_txpower=("$reply[@]") - -# Commands to go after "iw phy set" -local -a phy_set_cmds -_regex_words phy-set-commands "phy set commands" \ - 'a*ntenna:set a bitmap of allowed antennas to use for TX and RX:$phy_set_antenna' \ - 'ch*annel:set channel:$phy_set_channel' \ - 'co*verage:set coverage class (1 for every 3 usec of air propagation time):$phy_set_coverage' \ - 'd*istance:set appropriate coverage class for given link distance in meters:$phy_set_distance' \ - 'fra*g:set fragmentation threshold:$phy_set_frag' \ - 'fre*q:set frequency/channel the hardware is using, including HT configuration:$phy_set_freq' \ - 'na*me:rename this wireless device:$phy_set_name' \ - 'ne*tns:set network namespace:$phy_set_netns' \ - 'r*ts:set rts threshold:$phy_set_rts' \ - 't*xpower:specify transmit power level and setting type:$phy_set_txpower' -phy_set_cmds=("$reply[@]") - -# Commands to go after "iw phy interface" -local -a phy_interface_cmds -# This needs work (should not offer meshid, fouraddr of flags more than once, and need to accomodate multiple flag options) -phy_interface_cmds=(\( /$'add\0'/ ':add:add a new virtual interface with the given configuration:(add)' $ifacename $ifacetype \ - \( $meshid \| $fouraddr \| $flags \) \# \)) - -# Commands to go after "iw phy " -local -a phy_cmds -_regex_words phy-commands "phy command" \ - 's*et:set/configure interface properties:$phy_set_cmds' \ - 'inf*o:show capabilities for the specified wireless device' \ - 'int*erface:add a new virtual interface with the given configuration:$phy_interface_cmds' \ - 'w*owlan:WoWLAN commands:$phy_wowlan_cmds' -phy_cmds=("$reply[@]") - -# Parameters to hold patterns for dev commands -local -a dev_cmds_connect dev_cmds_cqm dev_cmds_get dev_cmds_ibss dev_cmds_interface dev_cmds_mesh dev_cmds_scan_options -local -a dev_cmds_mpath dev_cmds_offchannel dev_cmds_roc dev_cmds_scan dev_cmds_set dev_cmds_station dev_cmds_survey -dev_cmds_connect=($ssid $frequency $bssid $key) -dev_cmds_cqm=(/$'rssi\0'/ ':rssi:rssi:(rssi)' $matchnum ':thresh:threshold:' $matchnum ':hysteresis:hysteresis:') -dev_cmds_get=(/$'(mesh_param|power_save)\0'/ ':get:parameter:(mesh_param power_save)' $value) -# TODO: THIS NEEDS WORK! THE FINAL OPTIONS FOR JOIN NEED WORK -# dev ibss join [fixed-freq] [] [beacon-interval ] [basic-rates ] [mcast-rate ] [key d:0:abcde] -dev_cmds_ibss=(\( /$'leave\0'/ ':cmd:command:((leave:"Leave the IBSS cell"))' \| \( /$'join\0'/ ':cmd:command:((join\:"Join an IBSS cell"))' $ssid $frequency \( /$'fixed-freq\0'/ ':opt:option:((fixed-freq\:"fixed frequency (no args)"))' \| $bssid \| /$'beacon-interval\0'/ ':opt:option:((beacon-interval\:"beacon interval (takes single arg)"))' $numvalue \| /$'basic-rates\0'/ ':opt:option:((basic-rates\:"basic rates (comma separated list of rates)"))' $numvalue \| /$'mcast-rate\0'/ ':opt:option:((mcast-rate\:"multicast rate (takes single arg)"))' $numvalue \| $key \) \# \) \)) -dev_cmds_interface=(/$'add\0'/ ':add:add:(add)' $ifacename $ifacetype \( $meshid \| $fouraddr \| $flags \) \# ) -dev_cmds_mesh=(\( /$'leave\0'/ ':leave:leave a mesh:(leave)' \| /$'join\0'/ ':join:join a mesh:(join)' \ - $matchnum ':meshid:mesh ID:' $matchany ':parameter:mesh parameters [=]*:' \# \)) -dev_cmds_mpath=(\( /$'(del|get)\0'/ ':mpath:mesh path command:((del\:"remove the mesh path to the given node" \ -get\:"get information on mesh path to the given node"))' $lladdr \| /$'(new|set)\0'/ ':mpath:mesh path \ -command:((new\:"create a new mesh path (instead of relying on automatic discovery)" set\:"set an existing mesh \ -paths next hop"))' $lladdr /$'next_hop\0'/ ':nexthop:next hop:(next_hop)' $lladdr \| /$'dump\0'/ ':mpath:mesh path \ -command:((dump\:"list known mesh paths"))' \)) -dev_cmds_offchannel=($frequency $matchnum ':duration:duration:') -dev_cmds_roc=(/$'start\0'/ ':start:start:(start)' $frequency $matchnum ':time:time:') -dev_cmds_scan_options=(/$'freq\0'/ ':freq:freq:(freq)' $frequency $frequency \# /$'ies\0'/ ':ies:ies:(ies)' $lladdr \( /$'ssid\0'/ ':ssid:ssid:(ssid)' $ssid \# \| /$'passive\0'/ ':opt:passive:(passive)' \)) -dev_cmds_scan=(\( $dev_cmds_scan_options \| $matchany -'! [[ $match[1] =~ "dump|trigger" ]]' ':opt:option:((-u\:"include unknown data in results" \:""))' $dev_cmds_scan_options \| /$'dump\0'/ ':cmd:command:((dump\:"dump the current scan results"))' $matchany ':opt:option:((-u\:"include unknown data in results" \:""))' \| /$'trigger\0'/ ':cmd:command:((trigger\:"trigger a scan on the given frequencies with probing for the given SSIDs (or wildcard if not given) unless passive scanning is requested"))' $dev_cmds_scan_options \)) -local -a dev_cmds_set_bitrates dev_cmds_set_freq dev_cmds_set_mesh_param -local -a dev_cmds_set_monitor dev_cmds_set_peer dev_cmds_set_power_save -local -a dev_cmds_set_type dev_cmds_set_txpower -# dev set bitrates [legacy-<2.4|5> *] -dev_cmds_set_bitrates=(/$'legacy-*\0'/ ':opt:legacy:(legacy-2.4 legacy-2.5)' $matchnum ':rate:legacy rate in Mbps:') -# dev set freq [HT20|HT40+|HT40-] -dev_cmds_set_freq=($frequency $high_throughput) -# dev set mesh_param = [=]* -dev_cmds_set_mesh_param=( $matchany ':val:param=value:' \# ) -# dev set monitor * -dev_cmds_set_monitor=( $matchany ':flag:flag:((none\:"no special flags" fcsfail\:"show frames with FCS errors"\ - control\:"show control frames" otherbss\:"show frames from other BSSes" cook\:"use cooked mode"))' \# ) -# dev set peer -dev_cmds_set_peer=($lladdr) -# dev set power_save -dev_cmds_set_power_save=(/$'(on|off)\0'/ ':opt:power save mode:(on off)') - -_regex_words setcmds "dev set commands" \ - '4*addr:set interface 4addr (WDS) mode:$fouronoff'\ - 'b*itrates:set/clear specified rate masks:$dev_cmds_set_bitrates'\ - 'c*hannel:set channel:$phy_set_channel'\ - 'f*req:set frequency:$dev_cmds_set_freq'\ - 'mesh_param:set mesh parameters:$dev_cmds_set_mesh_param'\ - 'meshid:set mesh id:$meshidval'\ - 'mo*nitor:set monitor flags:$dev_cmds_set_monitor'\ - 'pe*er:set interface WDS peer MAC address:$dev_cmds_set_peer'\ - 'po*wer_save:set power save on/off:$dev_cmds_set_power_save'\ - 'tx*power:set transmission power:$phy_set_txpower'\ - 'ty*pe:set type:$ifacetypes' -dev_cmds_set=("$reply[@]") - -local -a dev_cmds_station_plink dev_cmds_station_vlan -dev_cmds_station_plink=(/$'(open|block)\0'/ ':opt::(open block)') -dev_cmds_station_vlan=($matchnum ':val:ifindex:') - -local -a dev_cmds_station_set -_regex_words stationsetcmds "dev station set commands"\ - 'plink_action:set peer link action:$dev_cmds_station_plink'\ - 'vlan:set AP VLAN:$dev_cmds_station_vlan' -dev_cmds_station_set=(\( $lladdr \) "$reply[@]") - -_regex_words stationcmds "dev station commands" \ - 'del:remove the given station entry (use with caution!):$lladdr'\ - 'dump:list all stations known, e.g. the AP on managed interfaces:'\ - 'get:get information for a specific station:$lladdr'\ - 'set:set AP VLAN or mesh peer link action:$dev_cmds_station_set' -dev_cmds_station=("$reply[@]") - -dev_cmds_survey=(/$'dump\0'/ ':dump:list all gathered channel survey data:(dump)') - -local -a dev_cmds -_regex_words dev-commands "dev commands" \ - 'co*nnect:join a network:$dev_cmds_connect' \ - 'cq*m:set connection quality monitor RSSI threshold:$dev_cmds_cqm' \ - 'de*l:remove this virtual interface' \ - 'di*sconnect:disconnect from the current network' \ - 'g*et:retrieve mesh parameter / power save state:$dev_cmds_get' \ - 'ib*ss:join/leave IBSS cell:$dev_cmds_ibss' \ - 'inf*o:show information for this interface' \ - 'int*erface:add an interface:$dev_cmds_interface' \ - 'l*ink:print information about the current link, if any' \ - 'me*sh:join/leave a mesh:$dev_cmds_mesh' \ - 'mp*ath:mesh path commands:$dev_cmds_mpath' \ - 'o*ffchannel:leave operating channel and go to the given channel for a while:$dev_cmds_offchannel' \ - 'r*oc:roc:$dev_cmds_roc' \ - 'sc*an:scan:$dev_cmds_scan' \ - 'se*t:set interface parameter:$dev_cmds_set' \ - 'st*ation:station commands:$dev_cmds_station' \ - 'su*rvey:list all gathered channel survey data:$dev_cmds_survey' -dev_cmds=( $devices "$reply[@]") - -# Arguments to _regex_arguments, built up in array $args. -local -a args reply -# Command word. Don't care what that is. -args=( $matchany ) - -local -a phydevs -phy_devs=( \( $(iw list|grep '^[[:alnum:]]\+'|cut -f 2 -d ' ') \) ) -phy_cmds=( \( $matchany ":test:test:$phy_devs[*]" \) "$phy_cmds[@]" ) - -_regex_words commands "iw command" \ - 'd*ev:commands to control/list the software devices:$dev_cmds' \ - 'e*vent:monitor events from the kernel:$event_opts' \ - 'h*elp:print usage for each command' \ - 'l*ist:list all wireless devices and their capabilities' \ - 'p*hy:commands to control the physical device:$phy_cmds' \ - 'r*eg:get/set regulatory domain:$reg_cmds' -args+=("$reply[@]") - -_regex_arguments _iw "${args[@]}" - -_iw "$@" - -# Local Variables: -# mode:shell-script -# End: diff --git a/src/_jekyll b/src/_jekyll deleted file mode 100644 index ca119e6..0000000 --- a/src/_jekyll +++ /dev/null @@ -1,145 +0,0 @@ -#compdef jekyll -# ------------------------------------------------------------------------------ -# Description -# ----------- -# -# Completion script for jekyll(http://jekyllrb.com) -# -# ------------------------------------------------------------------------------ -# Authors -# ------- -# -# * farseer90718 (https://github.com/farseer90718) -# -# ------------------------------------------------------------------------------ - -local ret=1 state - -local -a common_ops -common_ops=( - {-v,--version}"[Display version information]" - {-h,--help}"[Display help documentation]" - {-p,--plugins}"[Plugins directory (defautls to ./_plugins)]: :_directories" - {-s,--source}"[Source directory (defaults to ./)]: :_directories" - {-d,--destination}"[Destination directory (defautls to ./_site)]: :_directories" - "--layouts=[Layouts directory (defaults to ./_layouts)]: :_directories" - "--safe=[Safe mode (defaults to false)]" -) - -typeset -A opt_args -_arguments \ - ':subcommand:->subcommand' \ - $common_ops \ - '*::options:->options' && ret=0 - -case $state in - subcommand) - local -a subcommands - subcommands=( - "build:Build your site" - "docs:Launch local server with docs for jekyll" - "doctor:Search site and print specific deprecation warnings" - "help:Display global or [command] help documentation" - "import:Import your old blog to Jekyll" - "new:Creates a new Jekyll site scaffold in PATH" - "serve:Serve your site locally" - ) - - _describe -t subcommands 'jekyll subcommand' subcommands && ret=0 - ;; - - options) - local -a args - args=( - $common_ops - ) - - local -a config - config=( - "--config[Custom configuration file]: :_files" - ) - local -a help - help=( - {-h,--help}"[Display help information]" - ) - local -a build - build=( - {-w,--watch}"[Watch for changes and rebuild]" - "--limit_posts[Limits the number of posts to parse and publish]" - "--future[Publishes posts with a future date]" - "--lsi[Use LSI for improved related posts]" - "--drafts[Render posts in the _drafts folder]" - ) - - case $words[1] in - help) - args=() - compadd "$@" build docs doctor help import new serve - ;; - - build) - args+=( - $build - $config - ) - ;; - - docs) - args=( - {-p,--port}"[Port to listen on]: :_ports" - {-u,--host}"[Host to bind to]: :_hosts" - $help - ) - ;; - - doctor) - args+=( - $config - ) - ;; - - import) - args=( - "--source[Source file or URL to migrate from]:url" - "--file[File to migrate from]: :_files" - "--dbname[Database name to migrate from]:database" - "--user[Username to use when migrating]:user" - "--pass[Password to use when migrating]:password" - "--host[Host address to use when migrating]:url" - $help - ) - ;; - - new) - args=( - ": :_directories" - "--force[Force creation even if PATH already exists]" - "--blank[Creates scaffolding but with empty files]" - $help - ) - ;; - - serve) - args+=( - $build - $config - {-P,--port}"[Port to listen on]: :_posts" - {-H,--host}"[Host to bind to]: :_hosts" - {-b,--baseurl}"[Base URL]:url" - ) - - esac - - _arguments $args && ret=0 - ;; -esac - -return ret - -# Local Variables: -# mode: Shell-Script -# sh-indentation: 2 -# indent-tabs-mode: nil -# sh-basic-offset: 2 -# End: -# vim: ft=zsh sw=2 ts=2 et diff --git a/src/_lein b/src/_lein deleted file mode 100644 index c1b988f..0000000 --- a/src/_lein +++ /dev/null @@ -1,62 +0,0 @@ -#compdef lein -# ------------------------------------------------------------------------------ -# Description -# ----------- -# -# Completion script for Leiningen (https://github.com/technomancy/leiningen) -# -# Source: https://github.com/technolize/zsh-completion-funcs -# -# ------------------------------------------------------------------------------ -# Authors -# ------- -# -# * technolize (https://github.com/technolize) -# -# ------------------------------------------------------------------------------ - -local ret=1 state -_arguments ':subcommand:->subcommand' && ret=0 - -case $state in - subcommand) - subcommands=( - "check:Check syntax and warn on reflection." - "classpath:Print the classpath of the current project." - "clean:Remove all files from project's target-path." - "compile:Compile Clojure source into .class files." - "deploy:Build and deploy jar to remote repository." - "deps:Download all dependencies." - "do:Higher-order task to perform other tasks in succession." - "help:Display a list of tasks or help for a given task." - "install:Install the current project to the local repository." - "jack-in:Jack in to a Clojure SLIME session from Emacs." - "jar:Package up all the project's files into a jar file." - "javac:Compile Java source files." - "new:Generate project scaffolding based on a template." - "pom:Write a pom.xml file to disk for Maven interoperability." - "pprint:Pretty-print a representation of the project map." - "repl:Start a repl session either with the current project or standalone." - "retest:Run only the test namespaces which failed last time around." - "run:Run a -main function with optional command-line arguments." - "search:Search remote maven repositories for matching jars." - "show-profiles:List all available profiles or display one if given an argument." - "test:Run the project's tests." - "trampoline:Run a task without nesting the project's JVM inside Leiningen's." - "uberjar:Package up the project files and dependencies into a jar file." - "upgrade:Upgrade Leiningen to specified version or latest stable." - "version:Print version for Leiningen and the current JVM." - "with-profile:Apply the given task with the profile(s) specified." - ) - _describe -t subcommands 'leiningen subcommands' subcommands && ret=0 -esac - -return ret - -# Local Variables: -# mode: Shell-Script -# sh-indentation: 2 -# indent-tabs-mode: nil -# sh-basic-offset: 2 -# End: -# vim: ft=zsh sw=2 ts=2 et diff --git a/src/_logger b/src/_logger deleted file mode 100644 index 2b25938..0000000 --- a/src/_logger +++ /dev/null @@ -1,61 +0,0 @@ -#compdef logger -# ------------------------------------------------------------------------------ -# Description -# ----------- -# -# Completion script for logger (from bsdutils). -# -# Last updated: 26.02.2013 -# -# ------------------------------------------------------------------------------ -# Authors -# ------- -# -# * Valodim ( https://github.com/Valodim ) -# -# ------------------------------------------------------------------------------ - - -_logger_priority() { - local expl - - if compset -P '*.'; then - # hidden aliases.. not quite sure how this is supposed to work :\ - # compadd -n panic warning error - - # just this one tag - _wanted priority expl "Priority" \ - compadd -- debug info notice warn err crit alert emerg - return 0 - fi - - _wanted facility expl "Facility" \ - compadd -S '.' -- kern user mail daemon auth syslog lpr news \ - uucp cron security ftp ntp logaudit logalert clock \ - local0 local1 local2 local3 local4 local5 local6 local7 - return 0 - -} - -_logger() { - - local curcontext="$curcontext" state line - typeset -A opt_args - - _arguments -C -S -s \ - {-d,--udp}'[use UDP (TCP is default)]' \ - {-i,--id}'[log the process ID too]' \ - {-f,--file}'[log the contents of this file]:Logfile:_files' \ - '(-)'{-h,--help}'[display this help text and exit]' \ - {-n,--server}'[write to this remote syslog server]:Server:_hosts' \ - {-P,--port}'[use this UDP port]:UDP Port' \ - {-p,--priority}'[mark given message with this priority]:Priority:_logger_priority' \ - {-s,--stderr}'[output message to standard error as well]' \ - {-t,--tag}'[mark every line with this tag]:Tag' \ - {-u,--socket}'[write to this Unix socket]:Socket:_files -W *(=)' \ - '(-)'{-V,--version}'[output version information and exit]' \ - '*:Message:' && return 0 - -} - -_logger "$@" diff --git a/src/_lunar b/src/_lunar deleted file mode 100644 index 19b4832..0000000 --- a/src/_lunar +++ /dev/null @@ -1,314 +0,0 @@ -#compdef lunar lin lrm lvu -# ------------------------------------------------------------------------------ -# Description -# ----------- -# -# Completion script for Lunar (http://www.lunar-linux.org) -# -# Source: https://github.com/Valodim/lunar-zsh-completion -# -# ------------------------------------------------------------------------------ -# Authors -# ------- -# -# * Valodim (https://github.com/Valodim) -# -# ------------------------------------------------------------------------------ - - -# completion for lunar itself (different name, see below) -_lunar_comp() { - local suf ret=1 curcontext="$curcontext" - local -a vals state line expl - - # regular arguments, this will probably just hand down to the * command below - _arguments -C \ - '(- :)-d[Enables debug messages]' \ - '(- :)-h[Display help text]' \ - '(- :)-v[Increases the level of message output]' \ - '*::command:->command' && return 0 - - # complete the first word, ie. subcommand - if (( CURRENT == 1 )); then - local -a lunar_commands - # all lunar subcommands - lunar_commands=( - 'prune:Removes old sources and install/compile logs' - 'renew:Checks ver. against moonbase & recompiles if necessary' - 'update:Fetches latest moonbase and then does a "renew"' - 'rebuild:Recompiles all installed modules' - 'optimize:Shortcut to the optimization menu' - 'fix:Check and fix all modules and internal state of lunar' - 'nofix:Check but do not fix modules and internal state' - 'fixdepends:Check and fix the dependency database of lunar' - 'set:Check internal variable(s) and assign their values' - 'unset:Unsets an internal variable' - 'resurrect:Force modulename(s) to be unpacked from /var/cache' - 'install:Install a checklist of modules' - 'remove:Remove a checklist of modules' - 'hold:Place a hold on a checklist of modules' - 'unhold:Remove a hold on a checklist of modules' - 'exile:Remove a module a/o prevent it from being resurrected' - 'unexile:Allows a module to be compiled|resurrected again') - - # just show the commands with description - _describe -t commands 'lunar command' lunar_commands && ret=0 - return ret - else - - # at this point, we have to decide what to complete for specific subcommands - - # make a list of subcommands with no further arguments for later - local -a lunar_no_args - lunar_no_args=( prune renew update rebuild optimize fix nofix fixdepends ) - - # update the current context - curcontext="${curcontext%:*:*}:lunar-$words[1]:" - # if there is a specific function of the form _lunar-subcommand - if (( $+functions[_lunar-$words[1]] )); then - # call that for completion - _call_function ret _lunar-$words[1] - elif [[ -n "${lunar_no_args[(r)${words[1]}]}" ]]; then - # all commands from the array above take no further arguments - _message "lunar ${words[1]} requires no arguments" - else - # by default, complete modules - _lunar_modules - fi - return ret - fi -} - -# specific completion for lunar set -_lunar-set() { - # second argument: all lunar variables - if (( CURRENT == 2 )); then - local vars - vars=( ${(f)"$(cat /var/lib/lunar/unset.sh | cut -d' ' -f2)"} ) - _describe -t modules 'lunar variable' vars && return 0 - # third argument: some value - elif (( CURRENT == 3 )); then - _message "value" - # no further argument - else - _message "no further arguments" - fi -} - -_lunar-unset() { - local vars - vars=( ${(f)"$(cat /var/lib/lunar/unset.sh | cut -d' ' -f2)"} ) - _describe -t modules 'lunar variable' vars && return 0 -} - -_lunar-unhold() { - local vals - vals=( ${(f)"$(lvu held | sort | uniq)"} ) - _describe -t modules 'held modules' vals && return 0 -} - -_lunar-unexile() { - local vals - vals=( ${(f)"$(lvu exiled | sort | uniq)"} ) - _describe -t modules 'exiled modules' vals && return 0 -} - -_lrm() { - _arguments \ - '(-d --debug)'{-d,--debug}'[Enables debug messages]' \ - '(-D --downgrade)'{-D,--downgrade}'[downgrades a module]:module:_lunar_modules:version' \ - '(-h --help)'{-h,--help}'[Displays this help text]' \ - '(-k --keepconfig)'{-k,--keepconfig}'[remove module(s) but keep dependencies and config]' \ - '(-n --nosustain)'{-n,--nosustain}'[removes module(s) even if they are sustained]' \ - '(-u --upgrade)'{-u,--upgrade}'[remove the module but do not run scripts etc.]' \ - '(-v --verbose)'{-v,--verbose}'[Increases the level of message output]' \ - '(-p --purge)'{-p,--purge}'[Delete all modules that depend on the module(s) being removed as well]' \ - '*:module:_lunar_installed_modules' && return 0 -} - -_lin() { - _arguments \ - '(-c --compile)'{-c,--compile}'[Ignore /var/cache/lunar and compiles]' \ - '(-d --debug)'{-d,--debug}'[Enables debug messages]' \ - '--deps[Configure modules and determine dependencies]' \ - '(-f --from)'{-f,--from}'[Specify an alternate for /var/spool/lunar]:directory:_files -/' \ - '(-h --help)'{-h,--help}'[Displays help text]' \ - '--opts[Add custom configure options to the module]:configure option string' \ - '(-p --probe)'{-p,--probe}'[Only lin if not already installed]' \ - '(-r --reconfigure)'{-r,--reconfigure}'[Select new dependencies for modules]' \ - '(-R --resurrect)'{-R,--resurrect}'[Force to be unpacked from /var/cache/lunar]' \ - '(-s --silent)'{-s,--silent}'[Decreases the level of message output]' \ - '(-v --verbose)'{-v,--verbose}'[Increases the level of message output]' \ - '(-w --want)'{-w,--want}'[Try to install a different version]:wanted version' \ - '*:module:_lunar_modules' && return 0 -} - -# completion for lvu, very similar to the lunar one above (therefore uncommented) -_lvu() { - local suf ret=1 curcontext="$curcontext" - local -a vals state line expl - - _arguments -C \ - '(- :)-d[Enables debug messages]' \ - '(- :)-h[Display help text]' \ - '(- :)-v[Increases the level of message output]' \ - '*::command:->command' && return 0 - - if (( CURRENT == 1 )); then - local -a lvu_commands - lvu_commands=( - 'what:display a module''s description' - 'short:display a module''s short description' - 'where:display a module''s section' - 'cd:change directory to module and execs a new shell' - 'alien:discover untracked files' - 'from:discover what installed a given file' - 'leafs:display installed modules that have no explicit dependencies on them' - 'orphans:display installed modules that are missing dependencies' - 'conflicts:display conflicting files' - 'held:display held modules' - 'exiled:display exiled modules' - 'expired:display a list of modules which need an update' - 'info:display terse summary information about module' - 'search:searches all modules long descriptions for phrase.' - 'service:displays modules that provide that service' - 'website:display a module''s website' - 'install:display an install log' - 'size:find and show installed size of a module or ALL (slow)' - 'installed:display installed modules/version of module' - 'compile:display a compile log' - 'compiler:display the compiler version used' - 'links:display a list of modules that this module links to' - 'sources:display source files for a module' - 'urls:display all URLs for a module' - 'maintainer:display maintainer for a module' - 'version:display version of module in moonbase' - 'new:attempt to create a new module from scratch' - 'edit:copy a module to zlocal for editing' - 'diff:view changes on edited module' - 'submit:attempt to submit a module to the lunar ML' - 'unedit:delete zlocal copy of a module' - 'sum:display checksums' - 'md5sum:display md5sums' - 'export:make snapshot of box''s configuration.' - 'import:restores an exported snapshot.' - 'section:display moonbase sections' - 'moonbase:display text listing of the moonbase' - 'html:display html listing of the moonbase' - 'updatelog:display summary log of previous lunar update' - 'activity:display main log file' - 'newer:display available modules newer than Aug 01, 2003' - 'older:display modules installed before Jan 01, 2003' - 'voyeur:peak into module compilation' - 'pam:display installed modules that are Linux-PAM aware' - 'depends:displays installed modules that explicitly or recursively depend on this module.' - 'tree:displays a tree of the module''s dependencies' - 'stree:same as ''tree'' but highly abbreviated' - 'eert:same as ''tree'' but reverse and installed deps only' - 'leert:full reverse dependency tree') - - _describe -t commands 'lvu command' lvu_commands && ret=0 - - return ret - elif (( CURRENT == 2 )); then - local -a lvu_no_args - lvu_no_args=( alien leafs orphans conflicts held exiled expired export moonbase html updatelog pam ) - - curcontext="${curcontext%:*:*}:lvu-$words[1]:" - if (( $+functions[_lvu-$words[1]] )); then - _call_function ret _lvu-$words[1] - elif [[ -n "${lvu_no_args[(r)${words[1]}]}" ]]; then - _message "lvu ${words[1]} requires no arguments" - else - _lunar_modules - fi - return ret - else - _message "No further arguments" - fi - -} - -_lvu-service() { - _alternative \ - 'service:service name:_lvu-service-service' \ - 'port:port number:_guard "[0-9]#" "port number"' -} - -_lvu-service-service() { - local vals - vals=( ${(f)"$(cat /etc/services | grep -E -o '^(\w+)' | sort | uniq)"} ) - _describe -t modules 'service' vals && return 0 -} - -_lvu-diff() { - local vals - vals=( /var/lib/lunar/moonbase/zlocal/*(/:t) ) - _describe -t modules 'moonbase module from zlocal' vals && return 0 -} - -_lvu-unedit() { - local vals - vals=( /var/lib/lunar/moonbase/zlocal/*(/:t) ) - _describe -t modules 'moonbase module from zlocal' vals && return 0 -} - -_lvu-newer() { - _message "date string" -} - -_lvu-older() { - _message "date string" -} - -_lvu-import() { - _files -} - -_lvu-from() { - _files -} - -_lvu-new() { - _message "module name" -} - -_lvu-search() { - _message "search string" -} - -# specific completion for moonbase modules -_lunar_modules() { - local vals - vals=( /var/lib/lunar/moonbase/*/*(/:t) ) - _describe -t modules 'moonbase module' vals && return 0 -} - -# specific completion for moonbase modules -_lunar_installed_modules() { - local vals - vals=( ${(f)"$(lvu installed | cut -d':' -f1)"} ) - _describe -t modules 'moonbase installed module' vals && return 0 -} - -# hub function called for completion -_lunar() { - # decide which completion to use - case "$service" in - lin) _lin "$@";; - lrm) _lrm "$@";; - lvu) _lvu "$@";; - lunar) _lunar_comp "$@";; - *) _message "unknown command $service";; - esac -} - -_lunar "$@" - -# Local Variables: -# mode: Shell-Script -# sh-indentation: 2 -# indent-tabs-mode: nil -# sh-basic-offset: 2 -# End: -# vim: ft=zsh sw=2 ts=2 et diff --git a/src/_manage.py b/src/_manage.py deleted file mode 100644 index 7d35818..0000000 --- a/src/_manage.py +++ /dev/null @@ -1,276 +0,0 @@ -#compdef manage.py django-admin.py -# ------------------------------------------------------------------------------ -# Description -# ----------- -# -# Completion script for Django's manage.py (https://www.djangoproject.com). -# -# Source: https://github.com/technolize/zsh-completion-funcs -# -# ------------------------------------------------------------------------------ -# Authors -# ------- -# -# * technolize (https://github.com/technolize) -# -# ------------------------------------------------------------------------------ - - -_managepy-cleanup(){} -_managepy-compilemessages(){} - -_managepy-createcachetable(){ - _arguments -s : \ - $nul_args && ret=0 -} - -_managepy-dbshell(){ - _arguments -s : \ - $nul_args && ret=0 -} - -_managepy-diffsettings(){ - _arguments -s : \ - $nul_args && ret=0 -} - -_managepy-dumpdata(){ - _arguments -s : \ - '--format=-[specifies the output serialization format for fixtures.]:format:(json yaml xml)' \ - '--indent=-[specifies the indent level to use when pretty-printing output.]:' \ - $nul_args \ - '*::appname:_applist' && ret=0 -} - -_managepy-flush(){ - _arguments -s : \ - '--verbosity=-[verbosity level; 0=minimal output, 1=normal output, 2=all output.]:Verbosity:((0\:minimal 1\:normal 2\:all))' \ - '--noinput[tells Django to NOT prompt the user for input of any kind.]' \ - $nul_args && ret=0 -} - -_managepy-help(){ - _arguments -s : \ - '*:command:_managepy_cmds' \ - $nul_args && ret=0 -} - -_managepy_cmds(){ - local line - local -a cmd - _call_program help-command ./manage.py help \ - |& sed -n '/^ /s/[(), ]/ /gp' \ - | while read -A line; do cmd=($line $cmd) done - _describe -t managepy-command 'manage.py command' cmd -} - -_managepy-inspectdb(){ - _arguments -s : \ - $nul_args && ret=0 -} - -_managepy-loaddata(){ - _arguments -s : \ - '--verbosity=-[verbosity level; 0=minimal output, 1=normal output, 2=all output.]:Verbosity:((0\:minimal 1\:normal 2\:all))' \ - '*::file:_files' \ - $nul_args && ret=0 -} - -_managepy-makemessages(){} - -_managepy-reset(){ - _arguments -s : \ - '--noinput[tells Django to NOT prompt the user for input of any kind.]' \ - '*::appname:_applist' \ - $nul_args && ret=0 -} - -_managepy-runfcgi(){ - local state - - local fcgi_opts - fcgi_opts=( - 'protocol[fcgi, scgi, ajp, ... (default fcgi)]:protocol:(fcgi scgi ajp)' - 'host[hostname to listen on..]:' - 'port[port to listen on.]:' - 'socket[UNIX socket to listen on.]::file:_files' - 'method[prefork or threaded (default prefork)]:method:(prefork threaded)' - 'maxrequests[number of requests a child handles before it is killed and a new child is forked (0 = no limit).]:' - 'maxspare[max number of spare processes / threads.]:' - 'minspare[min number of spare processes / threads.]:' - 'maxchildren[hard limit number of processes / threads.]:' - 'daemonize[whether to detach from terminal.]:boolean:(False True)' - 'pidfile[write the spawned process-id to this file.]:file:_files' - 'workdir[change to this directory when daemonizing.]:directory:_files' - 'outlog[write stdout to this file.]:file:_files' - 'errlog[write stderr to this file.]:file:_files' - ) - - _arguments -s : \ - $nul_args \ - '*: :_values "FCGI Setting" $fcgi_opts' && ret=0 -} - -_managepy-runserver(){ - _arguments -s : \ - '--noreload[tells Django to NOT use the auto-reloader.]' \ - '--adminmedia[specifies the directory from which to serve admin media.]:directory:_files' \ - $nul_args && ret=0 -} - -_managepy-shell(){ - _arguments -s : \ - '--plain[tells Django to use plain Python, not IPython.]' \ - $nul_args && ret=0 -} - -_managepy-sql(){} -_managepy-sqlall(){} -_managepy-sqlclear(){} -_managepy-sqlcustom(){} -_managepy-sqlflush(){} -_managepy-sqlindexes(){} -_managepy-sqlinitialdata(){} -_managepy-sqlreset(){} -_managepy-sqlsequencereset(){} -_managepy-startapp(){} - -_managepy-startproject(){ - _arguments -s : \ - "(-v --verbosity)"{-v,--verbosity}"[Verbosity level; 0=minimal output, 1=normal output, 2=verbose output, 3=very verbose output.]:Verbosity:((0\:minimal 1\:normal 2\:verbose 4\:very\ verbose))" \ - '--template[The path or URL to load the template from.]:file:_files' \ - "(-e --extension)"{-e,--extension}"[The file extension(s) to render (default: "py"). Separate multiple extensions with commas, or use -e multiple times.]" \ - "(-n --name)"{-n,--name}"[The file name(s) to render. Separate multiple extensions with commas, or use -n multiple times. --version show program\'s version number and exit]:file:_files" \ - $nul_args \ - '*::args:_gnu_generic' -} - -_managepy-syncdb() { - _arguments -s : \ - '--verbosity=-[verbosity level; 0=minimal output, 1=normal output, 2=all output.]:Verbosity:((0\:minimal 1\:normal 2\:all))' \ - '--noinput[tells Django to NOT prompt the user for input of any kind.]' \ - $nul_args && ret=0 -} - -_managepy-test() { - _arguments -s : \ - '--verbosity=-[verbosity level; 0=minimal output, 1=normal output, 2=all output.]:Verbosity:((0\:minimal 1\:normal 2\:all))' \ - '--noinput[tells Django to NOT prompt the user for input of any kind.]' \ - '*::appname:_applist' \ - $nul_args && ret=0 -} - -_managepy-testserver() { - _arguments -s : \ - '--verbosity=-[verbosity level; 0=minimal output, 1=normal output, 2=all output.]:Verbosity:((0\:minimal 1\:normal 2\:all))' \ - '--addrport=-[port number or ipaddr:port to run the server on.]' \ - '*::fixture:_files' \ - $nul_args && ret=0 -} - -_managepy-validate() { - _arguments -s : \ - $nul_args && ret=0 -} - -_managepy-changepassword(){} -_managepy-createsuperuser(){} -_managepy-collectstatic(){} -_managepy-findstatic(){} - -_managepy-commands() { - local -a commands - - commands=( - 'cleanup:Can be run as a cronjob or directly to clean out old data from the database (only expired sessions at the moment).' - 'compilemessages:Compiles .po files to .mo files for use with builtin gettext support.' - 'createcachetable:creates the table needed to use the SQL cache backend.' - 'dbshell:runs the command-line client for the current DATABASE_ENGINE.' - "diffsettings:displays differences between the current settings.py and Django's default settings." - 'dumpdata:Output the contents of the database as a fixture of the given format.' - 'flush:Executes ``sqlflush`` on the current database.' - 'help:manage.py help.' - 'inspectdb:Introspects the database tables in the given database and outputs a Django model module.' - 'loaddata:Installs the named fixture(s) in the database.' - 'makemessages:Runs over the entire source tree of the current directory and pulls out all strings marked for translation.' - 'makemigrations:Creates new migrations based on the changes detected to your models.' - 'migrate:Synchronizes the database state with the current set of models and migrations.' - 'reset:Executes ``sqlreset`` for the given app(s) in the current database.' - 'runfcgi:Run this project as a fastcgi (or some other protocol supported by flup) application,' - 'runserver:Starts a lightweight Web server for development.' - 'shell:Runs a Python interactive interpreter.' - 'showmigrations:Shows all migrations in a project.' - 'sql:Prints the CREATE TABLE SQL statements for the given app name(s).' - 'sqlall:Prints the CREATE TABLE, custom SQL and CREATE INDEX SQL statements for the given model module name(s).' - 'sqlclear:Prints the DROP TABLE SQL statements for the given app name(s).' - 'sqlcustom:Prints the custom table modifying SQL statements for the given app name(s).' - 'sqldropindexes:Prints the DROP INDEX SQL statements for the given app name(s).' - 'sqlflush:Returns a list of the SQL statements required to return all tables in the database to the state they were in just after they were installed.' - 'sqlindexes:Prints the CREATE INDEX SQL statements for the given model module name(s).' - 'sqlmigrate:Prints the SQL for the named migration.' - "sqlinitialdata:RENAMED: see 'sqlcustom'" - 'sqlreset:Prints the DROP TABLE SQL, then the CREATE TABLE SQL, for the given app name(s).' - 'sqlsequencereset:Prints the SQL statements for resetting sequences for the given app name(s).' - 'squashmigrations:Squashes the migrations for app_label up to and including migration_name down into fewer migrations.' - "startapp:Creates a Django app directory structure for the given app name in this project's directory." - "startproject:Creates a Django project directory structure for the given project name in the current directory or the given destination." - "syncdb:Create the database tables for all apps in INSTALLED_APPS whose tables haven't already been created." - 'test:Runs the test suite for the specified applications, or the entire site if no apps are specified.' - 'testserver:Runs a development server with data from the given fixture(s).' - 'validate:Validates all installed models.' - ) - if [[ $words[1] =~ "manage.py$" ]]; then - commands=($commands - "changepassword:Change a user's password for django.contrib.auth." - 'createsuperuser:Used to create a superuser.' - 'collectstatic:Collect static files in a single location.' - 'findstatic:Finds the absolute paths for the given static file(s).' - ) - fi - - _describe -t commands 'manage.py command' commands && ret=0 -} - -_applist() { - local line - local -a apps - _call_program help-command "python -c \"import os.path as op, re, settings, sys;\\ - bn=op.basename(op.abspath(op.curdir));[sys\\ - .stdout.write(str(re.sub(r'^%s\.(.*?)$' % - bn, r'\1', i)) + '\n') for i in settings.\\ - INSTALLED_APPS if re.match(r'^%s' % bn, i)]\"" \ - | while read -A line; do apps=($line $apps) done - _values 'Application' $apps && ret=0 -} - -_manage.py() { - local -a nul_args - nul_args=( - '--settings=-[the Python path to a settings module.]:file:_files' - '--pythonpath=-[a directory to add to the Python path.]::directory:_directories' - '--traceback[print traceback on exception.]' - "--version[show program's version number and exit.]" - {-h,--help}'[show this help message and exit.]' - ) - - local curcontext=$curcontext ret=1 - - if ((CURRENT == 2)); then - _managepy-commands - else - shift words - (( CURRENT -- )) - curcontext="${curcontext%:*:*}:managepy-$words[1]:" - _call_function ret _managepy-$words[1] - fi -} - -_manage.py "$@" - -# Local Variables: -# mode: Shell-Script -# sh-indentation: 2 -# indent-tabs-mode: nil -# sh-basic-offset: 2 -# End: -# vim: ft=zsh sw=2 ts=2 et diff --git a/src/_pactree b/src/_pactree deleted file mode 100644 index 06bd404..0000000 --- a/src/_pactree +++ /dev/null @@ -1,26 +0,0 @@ -#compdef pactree -# ------------------------------------------------------------------------------ -# Description -# ----------- -# -# Completion script for pactree 4.0 -# -# ------------------------------------------------------------------------------ -# Authors -# ------- -# -# * Limao Luo -# -# ------------------------------------------------------------------------------ - -typeset -A opt_args - -_pactree() { - local -a cmd packages packages_long - packages_long=(/var/lib/pacman/local/*(/)) - packages=( ${${packages_long#/var/lib/pacman/local/}%-*-*} ) - compadd "$@" -a packages -} - -# run the main dispatcher -_pactree "$@" diff --git a/src/_pear b/src/_pear deleted file mode 100644 index 86f368f..0000000 --- a/src/_pear +++ /dev/null @@ -1,89 +0,0 @@ -#compdef pear -# ------------------------------------------------------------------------------ -# Description -# ----------- -# -# Completion script for Pear (http://pear.php.net). -# -# ------------------------------------------------------------------------------ -# Authors -# ------- -# -# * aki77 (https://github.com/aki77) -# -# ------------------------------------------------------------------------------ - - -_pear () { - local curcontext="$curcontext" state line expl ret=1 - - _arguments \ - '1: :->subcmds' \ - '*:: :->args' && ret=0 - - case $state in - subcmds) - _pear_commands - ;; - args) - local cmd args - - cmd=$words[1] - args=() - - case $cmd in - channel-alias|channel-delete|channel-info|channel-update) - args+=( - ':channel:_pear_discovered_channels' - ) - ;; - uninstall|upgrade|run-scripts) - args+=( - ':package:_pear_installed_packages' - ) - ;; - esac - - _arguments "$args[@]" && ret=0 - return - ;; - esac - return ret -} - -_pear_commands () { - local commands - - commands=( - ${${(f)${"$(_call_program commands $service 2>&1)"#*Commands:}%Usage:*}/[[:blank:]]*[[:blank:]][[:blank:]]/:} - ) - _describe -t commands 'Pear commands' commands -} - -_pear_installed_packages () { - local packages - - packages=( - ${${(f)"$(pear list)"#*STATE}%%[[:blank:]]*} - ) - _wanted package expl 'package' compadd -a packages -} - -_pear_discovered_channels () { - local channels - - channels=( - ${${${(f)"$(_call_program commands pear list-channels)"#*SUMMARY}%__uri*}%%[[:blank:]]*} - ) - _wanted channel expl 'channel' compadd -a channels -} - -_pear "$@" - -# Local Variables: -# mode: Shell-Script -# sh-indentation: 2 -# indent-tabs-mode: nil -# sh-basic-offset: 2 -# End: -# vim: ft=zsh sw=2 ts=2 et diff --git a/src/_primus b/src/_primus deleted file mode 100644 index 6530db2..0000000 --- a/src/_primus +++ /dev/null @@ -1,43 +0,0 @@ -# compdef primus -# ------------------------------------------------------------------------------ -# Description -# ----------- -# -# Completion script for primus (https://github.com/amonakov/primus). -# -# ------------------------------------------------------------------------------ -# Authors -# ------- -# -# * Christophe-Marie Duquesne -# -# ------------------------------------------------------------------------------ - - -local curcontext="$curcontext" state line -typeset -A opt_args - -args=( - '--version[output version information]' - '(-h --help)'{-h,--help}'[show help]' - '(-c --vgl-compress)'{-c,--vgl-compress}'[image transport method]:method:(proxy jpeg rgb xb yuv)' - '--failsafe[run a program even if the nvidia card is unavailable]' - '--no-failsafe[do not run a program if the nvidia card is unavailable]' - '--vgl-options[options to be passed to vglrun (example: +tr)]' - '(-q --quiet --silent)'{-q,--quiet,--silent}'[suppress all logging messages]' - '(-v --verbose)'{-v,--verbose}'[increase the verbosity level of log messages]' - '--debug[set the verbosity level to the maximum]' - '(-d --display)'{-d,--display}'[the X display number to use]' - '(-C --config)'{-C,--config}'[retrieve settings for Bumblebee from FILE]:file:_files' - '(-l --ldpath)'{-l,--ldpath}'[PATH the libraries like libGL.so are searched in]:file:_files -/' - '(-s --socket)'{-s,--socket}'[use FILE for communication with the daemon]:file:_files' -) - -_arguments $args -# -c, --vgl-compress METHOD image compression or transport to use with -# VirtualGL. Valid values for METHOD are proxy, -# jpeg, rgb, xv and yuv. Changing this setting -# may affect performance, CPU usage and image -# quality -# -d, --display DISPLAY the X display number to use - diff --git a/src/_rebar b/src/_rebar deleted file mode 100644 index 3ef13e9..0000000 --- a/src/_rebar +++ /dev/null @@ -1,94 +0,0 @@ -#compdef rebar -# ------------------------------------------------------------------------------ -# Description -# ----------- -# -# Completion script for rebar (https://github.com/rebar/rebar). -# -# Source: https://github.com/robbyrussell/oh-my-zsh/blob/master/plugins/rebar/_rebar -# -# ------------------------------------------------------------------------------ -# Authors -# ------- -# -# * YeJun Su -# -# ------------------------------------------------------------------------------ - -local curcontext=$curcontext state ret=1 -typeset -ga _rebar_global_opts - -_rebar_global_opts=( - '(--help -h)'{--help,-h}'[Show the program options]' - '(--commands -c)'{--commands,-c}'[Show available commands]' - '(--version -V)'{--version,-V}'[Show version information]' - '(-vvv -vv -v)'--verbose+'[Verbosity level. Default: 0]:verbosity level:(0 1 2 3)' - '(-vvv)-v[Slightly more verbose output]' - '(-vvv)-vv[More verbose output]' - '(-v -vv)-vvv[Most verbose output]' - '(--force -f)'{--force,-f}'[Force]' - '-D+[Define compiler macro]' - '(--jobs -j)'{--jobs+,-j+}'[Number of concurrent workers a command may use. Default: 3]:workers:(1 2 3 4 5 6 7 8 9)' - '(--config -C)'{--config,-C}'[Rebar config file to use]:files:_files' - '(--profile -p)'{--profile,-p}'[Profile this run of rebar]' - '(--keep-going -k)'{--keep-going,-k}'[Keep running after a command fails]' -) - -_rebar () { - _arguments -C $_rebar_global_opts \ - '*::command and variable:->cmd_and_var' \ - && return - - case $state in - cmd_and_var) - _values -S = 'variables' \ - 'clean[Clean]' \ - 'compile[Compile sources]' \ - 'create[Create skel based on template and vars]' \ - 'create-app[Create simple app skel]' \ - 'create-node[Create simple node skel]' \ - 'list-template[List avaiavle templates]' \ - 'doc[Generate Erlang program documentation]' \ - 'check-deps[Display to be fetched dependencies]' \ - 'get-deps[Fetch dependencies]' \ - 'update-deps[Update fetched dependencies]' \ - 'delete-deps[Delete fetched dependencies]' \ - 'list-deps[List dependencies]' \ - 'generate[Build release with reltool]' \ - 'overlay[Run reltool overlays only]' \ - 'generate-appups[Generate appup files]' \ - 'generate-upgrade[Build an upgrade package]' \ - 'eunit[Run eunit tests]' \ - 'ct[Run common_test suites]' \ - 'qc[Test QuickCheck properties]' \ - 'xref[Run cross reference analysis]' \ - 'help[Show the program options]' \ - 'version[Show version information]' \ - 'apps[Application names to process]:' \ - 'case[Common Test case]:' \ - 'dump_spec[Dump reltool spec]:' \ - 'jobs[Number of workers]::workers:(0 1 2 3 4 5 6 7 8 9)' \ - 'suites[Common Test suites]::suite name:_path_files -W "(src test)" -g "*.erl(:r)"' \ - 'verbose[Verbosity level]::verbosity level:(0 1 2 3)' \ - 'appid[Application id]:' \ - 'previous_release[Previous release path]:' \ - 'nodeid[Node id]:' \ - 'root_dir[Reltool config root directory]::directory:_files -/' \ - 'skip_deps[Skip deps]::flag:(true false)' \ - 'skip_apps[Application names to not process]::flag:(true false)' \ - 'template[Template name]:' \ - 'template_dir[Template directory]::directory:_files -/' \ - && ret=0 - ;; - esac -} - -_rebar - -# Local variables: -# mode: shell-script -# sh-basic-offset: 2 -# sh-indent-comment: t -# indent-tabs-mode: nil -# End: -# ex: sw=2 ts=2 et filetype=sh diff --git a/src/_socat b/src/_socat deleted file mode 100644 index 4b15e2a..0000000 --- a/src/_socat +++ /dev/null @@ -1,233 +0,0 @@ -#compdef socat -# ------------------------------------------------------------------------------ -# Description -# ----------- -# -# Completion script for socat ( http://www.dest-unreach.org/socat/ ). -# -# Source: https://github.com/Valodim/zsh-socat-completion -# Last updated: 23.02.2013, commit 3c564c9 -# -# ------------------------------------------------------------------------------ -# Authors -# ------- -# -# * Valodim ( https://github.com/Valodim ) -# -# ------------------------------------------------------------------------------ - - -if (( ! $+_socat_params || ! $+_socat_groups )); then - - # we cache socat parameters, groups, option groups, option types parsed - # straight from socat, since these are platform specific - typeset -gHA _socat_params _socat_groups _socat_opt_groups _socat_opt_types - - if _cache_invalid socat-params || _cache_invalid socat-groups \ - || ! _retrieve_cache socat-params || ! _retrieve_cache socat-groups ; then - () { - setopt localoptions rematchpcre - local line - - # anyone know a better way to do "get rest starting from matching line" than awk? - _call_program socat-params socat -h | awk '/address-head:/,0 { print }' | while read -r line; do - - # parse line, format: proxy::: groups=A,B,C - [[ $line =~ '([^:]+)((?::<[^:]+>)*)\s+groups=(.+)' ]] || continue - - # canonicalize and note down parameters - _socat_params[$match[1]]=${${${match[2]#:}//(\<|\>)/}//:/,} - - # store groups for this parameter - _socat_groups[$match[1]]=${match[3]} - - done - - _store_cache socat-params _socat_params - _store_cache socat-groups _socat_groups - - } - fi - - if _cache_invalid socat-opt-groups || _cache_invalid socat-opt-types \ - || ! _retrieve_cache socat-opt-groups || ! _retrieve_cache socat-opt-types ; then - () { - setopt localoptions rematchpcre - local line - - _call_program socat-opts socat -hh | awk '/opt:/,0 { print }' | while read -r line; do - # parse format: wronly groups=OPEN phase=OPEN type=BOOL - [[ $line =~ ' *(\w+)\s+groups=(\w+)\s.+type=(\w+)' ]] || continue - _socat_opt_groups[$match[1]]=$match[2] - _socat_opt_types[$match[1]]=${(L)match[3]} - done - } - - _store_cache socat-opt-groups _socat_opt_groups - _store_cache socat-opt-types _socat_opt_types - fi -fi - -if (( ! $+_socat_param_handler )); then - typeset -gHA _socat_param_handler - # bunch of manually extracted parameter handlers. names work as both - _socat_param_handler=( - create _files - gopen _files - open _files - pipe '_files -g *(p)' - unix-connect '_files -g *(=)' - unix-listen '_files -g *(=)' - unix-sendto '_files -g *(=)' - unix-recvfrom '_files -g *(=)' - unix-client '_files -g *(=)' - host '_hosts -S : -r :,\ \\t\\n\\-' - ) -fi - -if (( ! $+_socat_opt_handler )); then - typeset -gHA _socat_opt_handler - # bunch of manually extracted handlers - _socat_opt_handler=( - history _files - lockfile _files - waitlock _files - allow-table _files - deny-table _files - link _files - cert _files - key _files - dhparams _files - cafile _files - egdfile _files - capath '_files -/' - tcpwrap-etc '_files -/' - capath '_files -/' - chroot-early '_files -/' - path _directories - group _groups - group-early _groups - group-late _groups - setgid _groups - setgid-early _groups - user _users - user-early _users - user-late _users - setuid _users - setuid-early _users - su _users - su-d _users - ) -fi - -_socat_address_head() { - setopt localoptions extendedglob - - # do we have a socket type yet? - if ! compset -P 1 '(#b)(*)(:|,)'; then - # all which have pameters (ie, non-empty values) - compadd -M 'M:{[:upper:]}={[:lower:]}' -S : -r ":, \t\n\-" -k '_socat_params[(R)?*]' - # others (ie, empty value) - compadd -M 'M:{[:upper:]}={[:lower:]}' -S , -q -k '_socat_params[(R)]' - return 0 - fi - - local expl ret=1 - - # any parameters? - local socket_type="${(L)match[1]}" lastop="$match[2]" - - local -a params_left - params_left=( "${(@s:,:)_socat_params[$socket_type]}" ) - - if [[ $lastop == ':' ]]; then - - # chunk away the parameters - while compset -P 1 '[^:]#:'; do - (( $#params_left > 0 )) && shift params_left - done - - if compset -P '*,'; then - lastop=',' - elif (( $#params_left == 0 )); then - _message -e parameters "No more parameters for $socket_type" && return 0 - else - # do we have a handler? this works either by typename or socket type - if (( $+_socat_param_handler[$socket_type] )); then - _wanted param expl "parameter $params_left[1]" "${(@z)_socat_param_handler[$socket_type]}" && return 0 - elif (( $+_socat_param_handler[${params_left[1]}] )); then - _wanted param expl "parameter $params_left[1]" "${(@z)_socat_param_handler[$params_left[1]]}" && return 0 - else - _message -e parameters "$params_left[1]" && return 0 - fi - fi - - # shift to make warning msg below accurate - (( $#params_left > 0 )) && shift params_left - - fi - - # got any params left? At least leave a note.. - (( $#params_left > 0 )) && _message -e parameters "Unfilled parameters: $params_left" - - if [[ $lastop == ',' ]]; then - # chip away all old opts - compset -P '*,' - # is it one with a type? - if compset -P '(#b)(*)\='; then - if (( $+_socat_opt_types[$match[1]] )); then - # do we have a handler? - if (( $+_socat_opt_handler[$match[1]] )); then - _wanted optparam expl "option parameter <$_socat_opt_types[$match[1]]>" "${(@z)_socat_opt_handler[$match[1]]}" && return 0 - else - _message -e optparam "opt param for $match[1]: $_socat_opt_types[$match[1]]" && return 0 - fi - else - _message -e optparam "opt param for $match[1]: unknown" && return 0 - fi - fi - - # add completions for all groups, then - _tags "${(s:,:)_socat_groups[$socket_type]}" - while _tags; do - for g in ${(s:,:)_socat_groups[$socket_type]}; do - _requested $g expl "${(L)g}" \ - compadd -M 'M:{[:upper:]}={[:lower:]}' -S = -r '=, \t\n\-' -k "_socat_opt_groups[(R)$g]" && ret=0 - done - (( ret )) || break - done - fi - - return ret -} - -# complete common options -_arguments \ - -V'[print version and feature information to stdout, and exit]' \ - -h'[print a help text describing command line options and addresses, and exit]' \ - -hh'[like -h, plus a list of all common address option names]' \ - -hhh'[like -hh, plus a list of all available address option names]' \ - \*-d'[increase verbosity (use up to 4 times; 2 are recommended)]' \ - -D'[analyze file descriptors before loop]' \ - -ly'[log to syslog, using facility (default is daemon)]:log facility:( auth authpriv cron daemon kern lpr mail mark news security syslog user uucp local0 local1 local2 local3 local4 local5 local6 local7 )' \ - -lf'[log to file]:log file:_files' \ - -ls'[log to stderr (default if no other log)]' \ - -lm'[mixed log mode (stderr during initialization, then syslog)]:log facility:( auth authpriv cron daemon kern lpr mail mark news security syslog user uucp local0 local1 local2 local3 local4 local5 local6 local7 )' \ - -lp'[set the program name used for logging]:log program name' \ - -lu'[use microseconds for logging timestamps]' \ - -lh'[add hostname to log messages]' \ - '(-x)'-v'[verbose data traffic, text]' \ - '(-v)'-x'[verbose data traffic, hexadecimal]' \ - -b'[set data buffer size (8192)]:buffer size (bytes)' \ - -s'[sloppy (continue on error)]' \ - -t'[wait seconds before closing second channel]:timeout (seconds)' \ - -T'[total inactivity timeout in seconds]:timeout (seconds)' \ - '(-U)'-u'[unidirectional mode (left to right)]' \ - '(-u)'-U'[unidirectional mode (right to left)]' \ - -g'[do not check option groups]' \ - '(-W)'-L'[try to obtain lock, or fail]:lockfile:_files' \ - '(-L)'-W'[try to obtain lock, or wait]:lockfile:_files' \ - '(-6)'-4'[prefer IPv4 if version is not explicitly specified]' \ - '(-4)'-6'[prefer IPv6 if version is not explicitly specified]' \ - '*:socket:_socat_address_head' && return 0 - diff --git a/src/_symfony b/src/_symfony deleted file mode 100644 index ff23aad..0000000 --- a/src/_symfony +++ /dev/null @@ -1,456 +0,0 @@ -#compdef symfony -# ------------------------------------------------------------------------------ -# Description -# ----------- -# -# Completion script for Symfony (http://www.symfony-project.org). -# -# ------------------------------------------------------------------------------ -# Authors -# ------- -# -# * aki77 (https://github.com/aki77) -# -# ------------------------------------------------------------------------------ - - -_symfony () { - local curcontext="$curcontext" state line expl ret=1 cache_version - - cache_version=$(_get_sf_cache_var version) - (( ${(P)+cache_version} == 0 )) && { - eval $cache_version=${${${(z)$($service -V)}[3]}%.*} - } - - if [ ${(P)cache_version} = "1.0" ] ; then - _symfony10 - return - fi - - _arguments -C \ - '(-T --tasks)'{-T,--tasks}'[list of the symfony tasks]' \ - '(-V --version)'{-V,--version}'[version]' \ - '1: :->tasks' \ - '*:: :->args' && ret=0 - - case $state in - tasks) - _sf_tasks - ;; - args) - local task args - - task=$words[1] - args=( - ${${${${${(M)${${${(z)${${"$($service help $task)"#*Usage:}#[[:cntrl:]]}%%[[:cntrl:]]*}//\[/}//\]/}:#--*}%%\"*}/=/"=-"}/(#b)--(app|application)=-/--$match[1]=-:application:_sf_apps}//(#b)--(env|environment)=-/--$match[1]=-:environment:_sf_environments} - ) - - case $task in - help) - args+=( - ':task:_sf_tasks' - ) - ;; - - app:routes) - args+=( - ':application:_sf_apps' - ':"route name":' - ) - ;; - - configure:author) - _message 'project author' - ;; - - configure:database) - _message 'database dsn' - ;; - - generate:app) - _message 'new application name' - ;; - - generate:module) - args+=( - ':application:_sf_apps' - ':"new module name":' - ) - ;; - - generate:project) - _message 'new project name' - ;; - - generate:task) - _message 'new task name' - ;; - - i18n:extract) - args+=( - ':application:_sf_apps' - ':"target culture":' - ) - ;; - - i18n:find) - args+=( - ':application:_sf_apps' - ) - ;; - - log:rotate) - args+=( - ':application:_sf_apps' - ':environment:_sf_environments' - ) - ;; - - plugin:add-channel) - _message 'channel name' - ;; - - plugin:install) - _message 'plugin name' - ;; - - plugin:publish-assets) - args+=( - ':plugin:_sf_plugins' - ) - ;; - - plugin:uninstall) - _message 'plugin name' - ;; - - plugin:upgrade) - _message 'plugin name' - ;; - - project:deploy) - _message 'server name' - ;; - - project:disable|project:enable) - args+=( - ':environment:_sf_environments' - '*:application:_sf_apps' - ) - ;; - - project:optimize) - args+=( - ':application:_sf_apps' - ':environment:_sf_environments' - ) - ;; - - propel:data-dump|doctrine:data-dump) - _message 'target filename' - ;; - - propel:data-load|doctrine:data-load) - args+=( - '*:file:_files' - ) - ;; - - propel:generate-admin) - args+=( - ':application:_sf_apps' - ':model:_sf_models' - ) - ;; - - propel:generate-module|propel:init-admin) - args+=( - ':application:_sf_apps' - ':module:_sf_modules_candidate' - ':model:_sf_models' - ) - ;; - - propel:generate-module-for-route|doctrine:generate-module-for-route) - args+=( - ':application:_sf_apps' - ':"route name":' - ) - ;; - - doctrine:create-model-tables|doctrine:delete-model-files) - args+=( - '*:model:_sf_doctrine_models' - ) - ;; - - doctrine:generate-admin) - args+=( - ':application:_sf_apps' - '*:model:_sf_doctrine_models' - ) - ;; - - doctrine:generate-module) - args+=( - ':application:_sf_apps' - ':module:_sf_doctrine_modules_candidate' - ':model:_sf_doctrine_models' - ) - ;; - - test:coverage) - args+=( - '*:file:_files' - ) - ;; - - test:functional) - args+=( - ':application:_sf_apps' - '*:test:_sf_functionaltests' - ) - ;; - - test:unit) - args+=( - '*:test:_sf_unittests' - ) - ;; - - esac - - _arguments "$args[@]" && ret=0 - return - ;; - esac - return ret -} - -_symfony10 () { - local curcontext="$curcontext" state line expl ret=1 - - _arguments -C \ - '(-T --tasks)'{-T,--tasks}'[list of the symfony tasks]' \ - '(-V --version)'{-V,--version}'[version]' \ - '1: :->tasks' \ - '*:: :->args' && ret=0 - - case $state in - tasks) - _sf10_tasks - ;; - args) - local task args - - task=$words[1] - args=() - - case $task in - init-project) - _message 'new project name' - ;; - - init-app) - _message 'application name' - ;; - - init-module) - args+=( - ':application:_sf_apps' - ) - ;; - - init-batch) - args+=( - ':skeleton name:compadd default rotate' - ':"script name":' - ':application:_sf_apps' - ) - ;; - - init-controller) - args+=( - ':application:_sf_apps' - ':environment:_sf_environments' - ':"script name":' - ':"debug?":compadd true false' - ) - ;; - - log-rotate) - args+=( - ':application:_sf_apps' - ':environment:_sf_environments' - ) - ;; - - propel-load-data|propel-build-all-load) - args+=( - ':application:_sf_apps' - ':environment:_sf_environments' - ':fixtures:_sf_fixtures' - ) - ;; - - clear-cache|cc) - args+=( - ':application:_sf_apps' - ':what:compadd template config' - ) - ;; - - sync) - args+=( - ':environment:_sf_environments' - ':"real run?":compadd go' - ) - ;; - - propel-init-crud|propel*-init-admin|propel-generate-crud) - args+=( - ':application:_sf_apps' - ':module:_sf_modules_candidate' - ':model:_sf_models' - ) - ;; - - doctrine-init-admin|doctrine-generate-crud) - args+=( - ':application:_sf_apps' - ':module:_sf_doctrine_modules_candidate' - ':model:_sf_doctrine_models' - ) - ;; - - test-unit) - args+=( - ':test:_sf_unittests' - ) - ;; - - test-functional) - args+=( - ':application:_sf_apps' - ':test:_sf_functionaltests' - ) - ;; - - esac - - _arguments "$args[@]" && ret=0 - return - ;; - esac - return ret -} - -_sf_tasks () { - local tmp ns line cache_task - - cache_task=$(_get_sf_cache_var task) - (( ${(P)+cache_task} == 0 )) && { - tmp=( - ${${${(f)${"$($service -T)"##*Available tasks:}}##[[:blank:]][[:blank:]]}%%[[:blank:]]*} - ) - eval "$cache_task=()" - ns='' - - for line in $tmp; do - if [ $line[1] = ":" ] ; then - eval "$cache_task+=( ${ns}${line#:} )" - else - ns="${line}:" - fi - done - } - - _wanted symfony-task expl 'Symfony task' compadd -a $cache_task -} - -_sf10_tasks () { - local sf_tasks - - sf_tasks=( - ${${${(f)${"$($service -T)"#available pake tasks:}%%task aliases:*}#[[:blank:]][[:blank:]]}/[[:blank:]]*>[[:blank:]]/:} - ) - - _describe -t symfony-tasks 'Symfony task' sf_tasks -} - -_sf_apps () { - _wanted application expl 'application' compadd \ - ${$(echo apps/*):t} -} - -_sf_environments () { - local app - - app=$([ -f apps/"$words[2]"/config/settings.yml ] && echo $words[2] || echo frontend) - if [ -r apps/$app/config/settings.yml ] ; then - _wanted environment expl 'environment' compadd \ - ${${${(M)${(@f)"$( -# - -_tarsnap(){ - local -a commands - commands=( - '--fsck:Perform some integrity checks on the archives stored' - '--fsck-prune:Perform integrity checks and prune broken data' - '--list-archives:Print the names of archives stored' - '--nuke:Delete all of the archives stored' - '--print-stats:Print global statistics concerning the archives stored' - '-c:Create an archive containing the specified items and name' - '-d:Delete the specified archive' - '-r:Read the specified archive, convert it to a tar stream, and write it to stdout' - '-t:List archive contents to stdout' - '-x:Extract to disk from the archive' - ) - - if (( CURRENT == 2 )); then - _describe -t commands 'commands' commands - fi - - return 0 -} diff --git a/src/_veewee b/src/_veewee deleted file mode 100644 index 3de9adb..0000000 --- a/src/_veewee +++ /dev/null @@ -1,164 +0,0 @@ -#compdef veewee -# ------------------------------------------------------------------------------ -# Description -# ----------- -# -# Completion script for veewee 0.3.7 (https://github.com/jedi4ever/veewee) -# -# ------------------------------------------------------------------------------ -# Authors -# ------- -# -# * Marius Bergmann (https://github.com/mbrgm) -# -# ------------------------------------------------------------------------------ - -typeset curcontext state line cmds ret - -curcontext="$curcontext" -ret=1 - -_arguments -C \ - '--debug' \ - '--workdir=[Change the working directory (the folder containing the definitions folder).]:directory:_files -/' \ - '1: :->cmds' \ - '2: :->providers' \ - '*: :->args' && ret=0 - - -local -a provider_cmds; provider_cmds=( - 'build:Build box' - 'copy:Copy a file to the VM' - 'define:Define a new basebox starting from a template' - 'destroy:Destroys the virtualmachine that was built' - 'halt:Activates a shutdown the virtualmachine' - 'help:Describe subcommands or one specific subcommand' - 'list:Lists all defined boxes' - 'ostypes:List the available Operating System types' - 'sendkeys:Sends the key sequence (comma separated) to the box. E.g for testing the :boot_cmd_sequence' - 'ssh:SSH to box' - 'templates:List the currently available templates' - 'undefine:Removes the definition of a basebox' - 'up:Starts a Box' - 'validate:Validates a box against vmfusion compliancy rules' - 'winrm:Execute command via winrm' -) - -case $state in - cmds) - local -a cmds; cmds=( - 'fusion:Subcommand for Vmware fusion' - 'help:Describe available commands or one specific command' - 'kvm:Subcommand for KVM' - 'parallels:Subcommand for Parallels' - 'vbox:Subcommand for VirtualBox' - 'version:Prints the Veewee version information' - ) - - _describe -t commands 'veewee command' cmds && ret=0 - ;; - - providers) - case $line[1] in - (help) - local -a cmds; cmds=( - 'fusion' - 'help' - 'kvm' - 'parallels' - 'vbox' - 'version' - ) - - _values -S , 'commands' $cmds && ret=0 - ;; - - (fusion) - provider_cmds+='add_share:Adds a share to the guest' - provider_cmds+='export:Exports the basebox to the vagrant format' - - _describe -t commands 'veewee fusion command' provider_cmds && ret=0 - ;; - - (kvm) - provider_cmds+='export:Exports the basebox to the vagrant format' - - _describe -t commands 'veewee kvm command' provider_cmds && ret=0 - ;; - - (parallels) - _describe -t commands 'veewee parallels command' provider_cmds && ret=0 - ;; - - (vbox) - - provider_cmds+='export:Exports the basebox to the vagrant format' - provider_cmds+='screenshot:Takes a screenshot of the box' - - _describe -t commands 'veewee vbox command' provider_cmds && ret=0 - ;; - esac; - ;; - args) - case $line[2] in - (add_share|build|copy|destroy|export|halt|screenshot|sendkeys|ssh|undefine|up|validate|winrm) - if [ ${#line[@]} -eq 3 ]; then - boxes=( ${(f)"$(ls -1 ./definitions)"} ) - _values -S , 'boxes' $boxes && ret=0 - fi - ;; - (define) - if [ ${#line[@]} -eq 4 ]; then - templates=( ${(f)"$(_call_program templates veewee $line[1] templates | awk '/^veewee.+define/{sub(/^.+>[:\47] [:\47]/, "");sub(/[:\47].+$/, "");print}')"} ) - _values -S , 'templates' $templates && ret=0 - fi - ;; - (help) - local -a cmds; cmds=( - 'build' - 'copy' - 'define' - 'destroy' - 'halt' - 'help' - 'list' - 'ostypes' - 'sendkeys' - 'ssh' - 'templates' - 'undefine' - 'up' - 'validate' - 'winrm' - ) - if [ $line[1] = "fusion" ]; then - cmds+='add_share' - cmds+='export' - elif [ $line[1] = "kvm" ]; then - cmds+='export' - elif [ $line[1] = "vbox" ]; then - cmds+='export' - cmds+='screenshot' - fi - _values -S , 'commands' $cmds && ret=0 - ;; - esac; - case $line[2] in - (add_share) - if [ ${#line[@]} -eq 5 ]; then - _arguments "*::filename:_files" - fi - ;; - (copy) - if [ ${#line[@]} -eq 4 ]; then - _arguments "*::filename:_files" - fi - ;; - (screenshot) - if [ ${#line[@]} -eq 4 ]; then - _arguments "*::filename:_files" - fi - ;; - esac; - ;; -esac;