#!/bin/bash # AutoBuild Module by Hyy2001 # AutoBuild_Tools for Openwrt # Depends on bash wget curl block-mount e2fsprogs smartmontools Version=V1.4 TIME() { [[ ! -d ${log_Path} ]] && mkdir -p "${log_Path}" [[ ! -f ${log_Path}/AutoBuild_Tools.log ]] && touch "${log_Path}/AutoBuild_Tools.log" [[ -z $1 ]] && { echo -ne "\n\e[36m[$(date "+%H:%M:%S")]\e[0m " } || { case $1 in r) Color="\e[31m";; g) Color="\e[32m";; b) Color="\e[34m";; y) Color="\e[33m";; x) Color="\e[36m";; esac [[ $# -lt 2 ]] && { echo -e "\n\e[36m[$(date "+%H:%M:%S")]\e[0m $1" echo "[$(date "+%Y-%m-%d-%H:%M:%S")] $1" >> ${log_Path}/AutoBuild_Tools.log } || { echo -e "\n\e[36m[$(date "+%H:%M:%S")]\e[0m ${Color}$2\e[0m" echo "[$(date "+%Y-%m-%d-%H:%M:%S")] $2" >> ${log_Path}/AutoBuild_Tools.log } } } AutoBuild_Tools() { while : do clear echo -e "${Skyb}$(cat /etc/banner)${White}" echo -e "\n\nAutoBuild 固件工具箱 ${Version}\n" echo "1. USB 空间扩展" echo "2. Samba 一键共享" echo "3. 软件包安装" echo "4. 端口占用列表" echo "5. 查看硬盘信息" echo "u. 固件更新" echo -e "\nx. 更新脚本" echo -e "q. 退出\n" read -p "请从上方选择一个操作:" Choose case $Choose in q) rm -rf ${AutoBuild_Tools_Temp} clear exit 0 ;; u) [ -f /bin/AutoUpdate.sh ] && { AutoUpdate_UI } || { TIME r "未检测到 '/bin/AutoUpdate.sh',请确保当前固件支持一键更新!" } ;; x) wget -q ${Github_Raw}/Scripts/AutoBuild_Tools.sh -O ${AutoBuild_Tools_Temp}/AutoBuild_Tools.sh if [[ $? == 0 ]];then TIME y "[AutoBuild_Tools] 脚本更新成功!" rm -f /bin/AutoBuild_Tools.sh.sh mv -f ${AutoBuild_Tools_Temp}/AutoBuild_Tools.sh /bin chmod +x /bin/AutoBuild_Tools.sh else TIME r "[AutoBuild_Tools] 脚本更新失败!" fi sleep 2 ;; 1) which block > /dev/null 2>&1 [[ ! $? -eq 0 ]] && { TIME r "缺少相应依赖包,请先安装 [block-mount] !" sleep 3 } || { uci set fstab.@global[0].auto_mount='0' uci set fstab.@global[0].auto_swap='0' uci commit fstab AutoExpand_UI } ;; 2) AutoSamba_UI ;; 3) AutoInstall_UI ;; 4) clear echo -e "端口 服务名称\n" netstat -tanp | egrep ":::[0-9].+|0.0.0.0:[0-9]+|127.0.0.1:[0-9]+" | awk '{print $4"\t "$7}' | sed -r 's/:::/\1/' | sed -r 's/0.0.0.0:/\1/' | sed -r 's/127.0.0.1:/\1/'| sed -r 's/[0-9]+.\//\1/' | sort | uniq Enter ;; 5) which smartctl > /dev/null 2>&1 [[ ! $? -eq 0 ]] && { TIME r "缺少相应依赖包,请先安装 [smartmontools] !" sleep 3 } || Smart_Info ;; esac done } AutoExpand_UI() { clear echo -e "一键 USB 扩展内部空间/AutoExpand\n" USB_Check_Core [[ -n ${Check_Disk} ]] && { for ((i=1;i<=${Disk_Number};i++)); do Disk_info=$(sed -n ${i}p ${Disk_Processed_List}) List_Disk ${Disk_info} done echo -e "\nq. 返回" echo "r. 重新载入列表" } || { echo "未检测到外接硬盘!" && sleep 2 return 1 } echo "" read -p "请输入要操作的硬盘编号[1-${Disk_Number}]:" Choose echo "" case ${Choose} in q) return 0 ;; r) block mount AutoExpand_UI ;; *) [[ ${Choose} -gt 0 ]] > /dev/null 2>&1 && [[ ${Choose} -le ${Disk_Number} ]] > /dev/null 2>&1 && { which mkfs.ext4 > /dev/null 2>&1 [[ $? -eq 0 ]] && { AutoExpand_Core } || { TIME r "缺少相应依赖包,请先安装 [e2fsprogs] !" && sleep 3 } } || { TIME r "选择错误,请输入正确的选项!" sleep 2 && AutoExpand_UI exit } ;; esac } USB_Check_Core() { block mount rm -rf ${AutoExpend_Temp}/* echo "$(block info)" > ${Block_Info} Check_Disk="$(cat ${Block_Info} | awk -F ':' '/sd/{print $1}')" [[ -n ${Check_Disk} ]] && { echo "${Check_Disk}" > ${Disk_List} Disk_Number=$(sed -n '$=' ${Disk_List}) for Disk_Name in $(cat ${Disk_List}) do Mounted_Point=$(grep "${Disk_Name}" ${Block_Info} | egrep -o 'MOUNT="/[a-z].+' | awk -F '["]' '/MOUNT/{print $2}') [[ -z ${Mounted_Point} ]] && Mounted_Point="$(df -h | grep "${Disk_Name}" | awk '{print $6}' | awk 'NR==1')" Disk_Available="$(df -m | grep "${Disk_Name}" | awk '{print $4}' | awk 'NR==1')" [[ -z ${Disk_Available} ]] && Disk_Available=0 Disk_Format="$(cat ${Block_Info} | grep "${Disk_Name}" | egrep -o 'TYPE="[a-z].+' | awk -F '["]' '/TYPE/{print $2}')" touch ${Disk_Processed_List} [[ -n ${Mounted_Point} ]] && { echo "${Disk_Name} ${Mounted_Point} ${Disk_Format} ${Disk_Available}MB" >> ${Disk_Processed_List} } || { echo "${Disk_Name} ${Disk_Format}" >> ${Disk_Processed_List} } done grep -o "/dev/sd[a-z]" ${Disk_List} | sort | uniq > ${Phy_Disk_List} } } AutoExpand_Core() { Choosed_Disk="$(sed -n ${Choose}p ${Disk_Processed_List} | awk '{print $1}')" echo "警告: 本次操作将把硬盘: '${Choosed_Disk}' 格式化为 'ext4' 格式,请提前做好数据备份工作!" echo "注意: 操作开始后请不要中断任务或进行其他操作,否则可能导致设备数据丢失!" read -p "是否继续本次操作?[Y/n]:" Choose [[ ${Choose} == [Yy] ]] && sleep 3 && echo "" || { sleep 3 TIME "用户已取消操作." break } [[ $(mount) =~ ${Choosed_Disk} ]] > /dev/null 2>&1 && { Choosed_Disk_Mounted="$(mount | grep "${Choosed_Disk}" | awk '{print $3}')" echo "取消挂载: '${Choosed_Disk}' on '${Choosed_Disk_Mounted}' ..." umount -l ${Choosed_Disk_Mounted} > /dev/null 2>&1 [[ $(mount) =~ ${Choosed_Disk_Mounted} ]] > /dev/null 2>&1 && { echo "取消挂载: '${Choosed_Disk_Mounted}' 失败 !" exit 1 } } TIME "正在格式化硬盘: '${Choosed_Disk}',请耐心等待 ..." mkfs.ext4 -F ${Choosed_Disk} > /dev/null 2>&1 TIME "硬盘格式化完成! 挂载硬盘: '${Choosed_Disk}' 到 ' /tmp/extroot' ..." mkdir -p /tmp/introot && mkdir -p /tmp/extroot mount --bind / /tmp/introot mount ${Choosed_Disk} /tmp/extroot TIME "正在备份系统文件到硬盘: '${Choosed_Disk}',请耐心等待 ..." tar -C /tmp/introot -cf - . | tar -C /tmp/extroot -xf - TIME "取消挂载: '/tmp/introot' '/tmp/extroot' ..." umount /tmp/introot && umount /tmp/extroot [ ! -d /mnt/bak ] && mkdir -p /mnt/bak mount ${Choosed_Disk} /mnt/bak sync TIME "写入 '分区表' 到 '/etc/config/fstab' ..." block detect > /etc/config/fstab sed -i "s?/mnt/bak?/?g" /etc/config/fstab for ((i=0;i<=${Disk_Number};i++)); do uci set fstab.@mount[${i}].enabled='1' done uci commit fstab umount -l /mnt/bak TIME y "操作结束,外接硬盘: '${Choosed_Disk}' 已挂载到 '/'" read -p "挂载完成后需要重启生效,是否立即重启路由器?[Y/n]:" Choose [[ ${Choose} == [Yy] ]] && { sleep 3 && TIME g "\n正在重启路由器,请耐心等待 ..." sync reboot } || { TIME "用户已取消重启操作." sleep 3 break } } List_Disk() { [[ -n $3 ]] && { echo "${i}. '$1' 挂载点: '$2' 格式: '$3' 可用空间: $4" } || echo "${i}. '$1' 格式: '$2' 未挂载" } AutoSamba_UI() { while : do clear echo -e "Samba 工具箱/AutoSamba\n" echo "1. 删除所有 Samba 挂载点" echo "2. 自动生成 Samba 共享" echo "3. 关闭/开启自动共享" echo -e "\nq. 返回\n" read -p "请从上方选择一个操作:" Choose case $Choose in 1) Remove_Samba_Settings ;; 2) Mount_Samba_Devices ;; 3) autosamba="$(uci get samba.@samba[0].autoshare)" [[ ${autosamba} == 0 ]] && { uci set samba.@samba[0].autoshare='1' autosamba_mode="开启" } || { uci set samba.@samba[0].autoshare='0' autosamba_mode="关闭" } TIME y "已${autosamba_mode} Samba 自动共享!" uci commit samba sleep 3 ;; q) break ;; esac done } Remove_Samba_Settings() { while : do Samba_config="$(grep "sambashare" /etc/config/samba | wc -l)" [[ ${Samba_config} -eq 0 ]] && break uci delete samba.@sambashare[0] uci commit done TIME y "已删除所有 Samba 挂载点!" sleep 2 } Mount_Samba_Devices() { echo "$(cat /proc/mounts | awk -F ':' '/sd/{print $1}')" > ${Samba_Disk_List} Disk_Number=$(sed -n '$=' ${Samba_Disk_List}) echo "" for ((i=1;i<=${Disk_Number};i++)); do Disk_Name=$(sed -n ${i}p ${Samba_Disk_List} | awk '{print $1}') Disk_Mounted_Point=$(sed -n ${i}p ${Samba_Disk_List} | awk '{print $2}') Samba_Name=${Disk_Mounted_Point#*/mnt/} uci show 2>&1 | grep "sambashare" > ${Samba_UCI_List} if [[ ! $(cat ${Samba_UCI_List}) =~ ${Disk_Name} ]] > /dev/null 2>&1 ;then TIME g "共享硬盘: '${Disk_Name}' on '${Disk_Mounted_Point}' 到 '${Samba_Name}' ..." echo -e "\nconfig sambashare" >> ${Samba_Config} echo -e "\toption auto '1'" >> ${Samba_Config} echo -e "\toption name '${Samba_Name}'" >> ${Samba_Config} echo -e "\toption device '${Disk_Name}'" >> ${Samba_Config} echo -e "\toption path '${Disk_Mounted_Point}'" >> ${Samba_Config} echo -e "\toption read_only 'no'" >> ${Samba_Config} echo -e "\toption guest_ok 'yes'" >> ${Samba_Config} echo -e "\toption create_mask '0666'" >> ${Samba_Config} echo -e "\toption dir_mask '0777'" >> ${Samba_Config} else TIME y "硬盘: '${Disk_Name}' 已设置共享点: '${Samba_Name}' !" fi done /etc/init.d/samba restart sleep 3 } AutoInstall_UI() { while : do clear echo -e "安装软件包\n" echo "1. 更新软件包列表" AutoInstall_UI_mod 2 block-mount AutoInstall_UI_mod 3 e2fsprogs AutoInstall_UI_mod 4 smartmontools echo "x. 自定义软件包名" echo -e "\nq. 返回\n" read -p "请从上方选择一个操作:" Choose echo "" case $Choose in q) break ;; x) echo -e "常用的附加参数:\n" echo "--force-depends 在安装、删除软件包时无视失败的依赖" echo "--force-downgrade 允许降级安装软件包" echo -e "--force-reinstall 重新安装软件包\n" read -p "请输入你想安装的软件包名和附加参数:" PKG_NAME Install_opkg_mod $PKG_NAME ;; 1) opkg update sleep 1 ;; 2) Install_opkg_mod block-mount ;; 3) Install_opkg_mod e2fsprogs ;; 4) Install_opkg_mod smartmontools ;; esac done } AutoUpdate_UI() { while : do AutoUpdate_Version=$(awk 'NR==6' /bin/AutoUpdate.sh | awk -F '[="]+' '/Version/{print $2}') clear echo -e "AutoBuild 固件更新/AutoUpdate ${AutoUpdate_Version}\n" echo "1. 更新固件 [保留配置]" echo "2. 强制更新固件 (跳过版本号验证,自动安装缺失的软件包) [保留配置]" echo "3. 不保留配置更新固件 [全新安装]" echo "4. 列出固件信息" echo "5. 清除固件下载缓存" echo "6. 更改 Github API 地址" [[ ${DEFAULT_Device} == x86_64 ]] && echo "7. 指定 x86 设备下载 UEFI/Legacy 引导的固件" echo -e "\nx. 更新 [AutoUpdate] 脚本" echo -e "q. 返回\n" read -p "请从上方选择一个操作:" Choose case ${Choose} in q) break ;; x) wget -q ${Github_Raw}/Scripts/AutoUpdate.sh -O ${AutoBuild_Tools_Temp}/AutoUpdate.sh [[ $? == 0 ]] && { TIME y "脚本更新成功!" rm -f /bin/AutoUpdate.sh mv -f ${AutoBuild_Tools_Temp}/AutoUpdate.sh /bin chmod +x /bin/AutoUpdate.sh } || TIME r "脚本更新失败!" sleep 2 ;; 1) bash /bin/AutoUpdate.sh ;; 2) bash /bin/AutoUpdate.sh -f ;; 3) bash /bin/AutoUpdate.sh -n ;; 4) bash /bin/AutoUpdate.sh --list Enter ;; 5) bash /bin/AutoUpdate.sh --clean sleep 1 ;; 6) echo "" read -p "请输入新的 Github 地址:" Github_URL [[ -n ${Github_URL} ]] && bash /bin/AutoUpdate.sh -C ${Github_URL} || { TIME r "Github 地址不能为空!" } sleep 2 ;; 7) echo "" read -p "请输入你想要的启动方式[UEFI/Legacy]:" _BOOT [[ -n ${_BOOT} ]] && bash /bin/AutoUpdate.sh -B ${_BOOT} || { TIME r "启动方式不能为空!" } sleep 2 ;; esac done } Smart_Info() { TIME g "Loading disk information ,please wait..." USB_Check_Core clear smartctl -v | awk 'NR==1' cat ${Phy_Disk_List} | while read Phy_Disk do GET_Smart_Info ${Phy_Disk} done Enter } getinf() { grep "$1" $2 | sed "s/^[$1]*//g" 2>/dev/null | sed 's/^[ \t]*//g' 2>/dev/null } GET_Smart_Info() { smartctl -H -A -i $1 > ${Smart_Info1} smartctl -H -A -i -d scsi $1 > ${Smart_Info2} if [[ ! $(smartctl -H $1) =~ Unknown ]];then [[ $(smartctl -H $1) =~ PASSED ]] && Phy_Health=PASSED || Phy_Health=Failure else Phy_Health=$(getinf "SMART Health Status:" ${Smart_Info2}) fi Phy_Name=$(getinf "Device Model:" ${Smart_Info1}) Phy_ID=$(getinf "Serial number:" ${Smart_Info2}) Phy_Capacity=$(getinf "User Capacity:" ${Smart_Info2}) Phy_Part_Number=$(grep -c "${Phy_Disk}" ${Disk_Processed_List}) Phy_Factor=$(getinf "Form Factor:" ${Smart_Info2}) [[ -z ${Phy_Factor} ]] && Phy_Factor=不可用 Phy_Sata_Version=$(getinf "SATA Version is:" ${Smart_Info1}) [[ -z ${Phy_Sata_Version} ]] && Phy_Sata_Version=不可用 TRIM_Command=$(getinf "TRIM Command:" ${Smart_Info1}) [[ -z ${TRIM_Command} ]] && TRIM_Command=不可用 Power_On=$(grep "Power_On" ${Smart_Info1} | awk '{print $NF}') Power_Cycle_Count=$(grep "Power_Cycle_Count" ${Smart_Info1} | awk '{print $NF}') [[ -z ${Power_On} ]] && { Power_Status=未知 } || { Power_Status="${Power_On} 小时 / ${Power_Cycle_Count} 次" } if [[ $(getinf "Rotation Rate:" ${Smart_Info2}) =~ "Solid State" ]];then Phy_Type=固态硬盘 Phy_RPM=不可用 else Phy_Type=其他硬盘 if [[ $(getinf "Rotation Rate:" ${Smart_Info2}) =~ rpm ]];then Phy_RPM="$(getinf "Rotation Rate:" ${Smart_Info2})" Phy_Type=机械硬盘 else Phy_RPM=不可用 fi fi [[ -z ${Phy_Name} ]] && { Phy_Name="$(getinf Vendor: ${Smart_Info2})$(getinf Product: ${Smart_Info2})" } Phy_LB=$(getinf "Logical block size:" ${Smart_Info2}) Phy_PB=$(getinf "Physical block size:" ${Smart_Info2}) if [[ -n ${Phy_PB} ]];then Phy_BS="${Phy_LB} / ${Phy_PB}" else Phy_BS="${Phy_LB}" fi Phy_Localtime=$(getinf "Local Time is:" ${Smart_Info2}) cat < /dev/null 2>&1 && { echo "$1. 安装 [$2] [已安装]" } || echo "$1. 未安装 [$2] [已安装]" } Install_opkg_mod() { opkg install ${*} [[ $(opkg list | awk '{print $1}') =~ $1 ]] > /dev/null 2>&1 && { TIME y "$1 安装成功!" } || TIME r "$1 安装失败!" sleep 2 } Enter() { echo "" && read -p "按下[回车]键以继续..." Key } export White="\e[0m" export Yellow="\e[33m" export Red="\e[31m" export Blue="\e[34m" export Skyb="\e[36m" AutoBuild_Tools_Temp="/tmp/AutoBuild_Tools" AutoExpend_Temp="${AutoBuild_Tools_Temp}/AutoExpand" log_Path=/tmp Disk_List="${AutoExpend_Temp}/Disk_List" Block_Info="${AutoExpend_Temp}/Block_Info" Disk_Processed_List="${AutoExpend_Temp}/Disk_Processed_List" Phy_Disk_List="${AutoExpend_Temp}/Phy_Disk_List" Smart_Info1="${AutoExpend_Temp}/Smart_Info1" Smart_Info2="${AutoExpend_Temp}/Smart_Info2" [[ ! -d ${AutoExpend_Temp} ]] && mkdir -p "${AutoExpend_Temp}" Samba_Config="/etc/config/samba" Samba_Temp="${AutoBuild_Tools_Temp}/AutoSamba" Samba_Disk_List="${Samba_Temp}/Disk_List" Samba_UCI_List="${Samba_Temp}/UCI_List" [[ ! -d ${Samba_Temp} ]] && mkdir -p "${Samba_Temp}" Github_Raw="https://raw.githubusercontent.com/Hyy2001X/AutoBuild-Actions/master" [ -f /etc/openwrt_info ] && source /etc/openwrt_info AutoBuild_Tools